Date: Sun, 5 Jun 2005 22:28:38 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: ticso@cicely.de Cc: freebsd-alpha@freebsd.org Subject: Re: 5.4-STABLE problem on 164SX? Message-ID: <20050605202838.GA79070@freebie.xs4all.nl> In-Reply-To: <20050605195404.GR60590@cicely12.cicely.de> References: <20050605184456.GA78612@freebie.xs4all.nl> <20050605195404.GR60590@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jun 05, 2005 at 09:54:05PM +0200, Bernd Walter wrote.. > On Sun, Jun 05, 2005 at 08:44:56PM +0200, Wilko Bulte wrote: > > Folks, > > > > After just having built the June 2005 6.0 and 5.4-STABLE > > snapshots I tested them on my 164SX. > > > > 6.0 works OK, but 5.4-STABLE after a test install gives me a hang > > when rebooting from the freshly installed disk: > > > > cd0 at ahc0 bus 0 target 0 lun 0 > > cd0: <TOSHIBA CD-ROM XM-6201TA 1206> Removable CD-ROM SCSI-2 device > > cd0: 10.000MB/s transfers (10.000MHz, offset 15) > > cd0: Attempt to query device size failed: NOT READY, Medium not present > > da0 at ahc0 bus 0 target 1 lun 0 > > da0: <IBM DDRS-39130W S92A> Fixed Direct Access SCSI-2 device > > da0: Serial Number REF38392 > > da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > > Enabled > > da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C) > > (ahc0:A:0:0): Sending SDTR period 19, offset f > > (ahc0:A:0:0): Received SDTR period 19, offset f > > Filtered to period 19, offset f > > (cd0:ahc0:0:0:0): error 6 > > (cd0:ahc0:0:0:0): Unretryable Error > > (ahc0:A:0:0): Sending SDTR period 19, offset f > > (ahc0:A:0:0): Received SDTR period 19, offset f > > Filtered to period 19, offset f > > (cd0:ahc0:0:0:0): error 6 > > (cd0:ahc0:0:0:0): Unretryable Error > > GEOM: Configure da0a, start 0 length 268435456 end 268435455 > > GEOM: Configure da0b, start 268435456 length 2143109120 end 2411544575 > > GEOM: Configure da0c, start 0 length 9139200000 end 9139199999 > > GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031 > > GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487 > > GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999 > > Mounting root from ufs:/dev/da0a > > start_init: trying /sbin/init > > > > <hang> > > > > On the DS10 the same thing works just fine. > > > > I would appreciate if people with other Alpha models could try the SNAP > > to see if it is just my box. > > I personally never had success with any ahc controller in any alpha. In what sense? Booting an ahc? Only a few SRM versions / machine models can do that. But the 164SX allows me to install and boot 6.0-current without problems. -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050605202838.GA79070>