Date: Tue, 23 Aug 2005 20:57:33 -0400 From: "Brian J. McGovern" <mcgovern@beta.com> To: questions@freebsd.org Subject: Getting a Netgear WG511T recognized on 5.4/6.0... Message-ID: <200508240057.j7O0vX6K069997@spoon.beta.com>
next in thread | raw e-mail | index | archive | help
I have a HP AMD64 laptop (Pavillion zv5000) with a built-in Broadcom wireless
card that doesn't appear to be supported, so I picked up a WG511T, which
claims to be supported by the ath man page.
However, in recompiling the kernel with the ath driver and installing the
card, I don't get the device.
Attached is the verbose dmesg output at boot, and the kernel config. pccardd
won't start at all, claiming "fatal error: no PC-CARD slots", although cardbus
slots do show up.
Any chance I can get this working, or am I SOL?
-B
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA2 #4: Thu Aug 11 21:53:48 EDT 2005
root@:/usr/src/sys/i386/compile/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a6a000.
APIC: Could not find any APICs.
Calibrating clock(s) ... i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 797945689 Hz
CPU: AMD Athlon(tm) 64 Processor 3200+ (797.95-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0xf4a Stepping = 10
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 1073152000 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000003ed39fff, 1041321984 bytes (254229 pages)
avail memory = 1041285120 (993 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f71f0
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd750+0x16c
pnpbios: Found PnP BIOS data at 0xc00f7280
pnpbios: Entry = f0000:b71d Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
ath_rate: <Atsushi Onoe's rate control algorithm>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001110
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdf10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x06 9 10 11 12 14 15
embedded 0 2 A 0x09 9 10 11 12
embedded 0 2 B 0x0a 9 10 11 12
embedded 0 2 C 0x07 9 10 11 12
embedded 0 6 A 0x0c 9 10 11 12 14 15
embedded 0 6 B 0x0d 9 10 11 12 14 15
slot 1 0 9 A 0x08 9 10 11 12 14 15
embedded 0 10 A 0x01 9 10 11 12 14 15
embedded 0 10 B 0x02 9 10 11 12 14 15
embedded 0 10 C 0x03 9 10 11 12 14 15
embedded 0 10 D 0x04 9 10 11 12 14 15
embedded 2 0 A 0x01 9 10 11 12 14 15
embedded 2 1 A 0x02 9 10 11 12 14 15
embedded 2 4 A 0x01 9 10 11 12 14 15
embedded 2 4 B 0x02 9 10 11 12 14 15
embedded 2 2 A 0x03 9 10 11 12 14 15
embedded 0 11 A 0x05 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x6 255 N 1 9 10 11 12 14 15
0x9 255 N 1 9 10 11 12
0xa 255 N 1 9 10 11 12
0x7 255 N 1 9 10 11 12
0xc 255 N 1 9 10 11 12 14 15
0xd 255 N 1 9 10 11 12 14 15
0x8 255 N 1 9 10 11 12 14 15
0x1 255 N 3 9 10 11 12 14 15
0x2 255 N 3 9 10 11 12 14 15
0x3 255 N 2 9 10 11 12 14 15
0x4 255 N 1 9 10 11 12 14 15
0x5 255 N 1 9 10 11 12 14 15
$PIR: Found matching pin for 0.1.INTA at func 1: 10
$PIR: Found matching pin for 0.2.INTA at func 0: 11
$PIR: Found matching pin for 0.2.INTB at func 1: 10
$PIR: Found matching pin for 0.2.INTC at func 2: 10
$PIR: Found matching pin for 0.6.INTA at func 0: 11
$PIR: Found matching pin for 0.6.INTB at func 1: 10
$PIR: Found matching pin for 2.0.INTA at func 0: 11
$PIR: Found matching pin for 2.1.INTA at func 0: 10
$PIR: Found matching pin for 2.4.INTA at func 0: 11
$PIR: Found matching pin for 2.4.INTB at func 1: 10
$PIR: Found matching pin for 2.2.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x6 10 Y 1 9 10 11 12 14 15
0x9 11 Y 1 9 10 11 12
0xa 10 Y 1 9 10 11 12
0x7 10 Y 1 9 10 11 12
0xc 11 Y 1 9 10 11 12 14 15
0xd 10 Y 1 9 10 11 12 14 15
0x8 255 N 1 9 10 11 12 14 15
0x1 11 Y 3 9 10 11 12 14 15
0x2 10 Y 3 9 10 11 12 14 15
0x3 11 Y 2 9 10 11 12 14 15
0x4 255 N 1 9 10 11 12 14 15
0x5 255 N 1 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 7 7 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x00d1, revid=0xa4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x10de, dev=0x00d0, revid=0xa6
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d4, revid=0xa4
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00002040, size 6, enabled
map[24]: type 4, range 32, base 00002000, size 6, enabled
$PIR: 0:1 INTA routed to irq 10
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0000000, size 12, enabled
$PIR: 0:2 INTA routed to irq 11
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0001000, size 12, enabled
$PIR: 0:2 INTB routed to irq 10
found-> vendor=0x10de, dev=0x00d8, revid=0xa2
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0004000, size 8, enabled
$PIR: 0:2 INTC routed to irq 10
found-> vendor=0x10de, dev=0x00da, revid=0xa2
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 4, range 32, base 00001c00, size 7, enabled
map[18]: type 1, range 32, base e0002000, size 12, enabled
$PIR: 0:6 INTA routed to irq 11
found-> vendor=0x10de, dev=0x00d9, revid=0xa2
bus=0, slot=6, func=1
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 4, range 32, base 00001c80, size 7, enabled
map[18]: type 1, range 32, base e0003000, size 12, enabled
$PIR: 0:6 INTB routed to irq 10
found-> vendor=0x10de, dev=0x00d5, revid=0xa5
bus=0, slot=8, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00002080, size 4, enabled
found-> vendor=0x10de, dev=0x00dd, revid=0xa2
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x00d2, revid=0xa4
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <NVIDIA nForce3 AGP Controller> mem 0xe8000000-0xefffffff at device 0.0 on pci0
AMD64: 1 Misc. Control unit(s) found.
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 128M
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0:1:1: Transition from D0 to D3
ohci0: <nVidia nForce3 USB Controller> mem 0xe0000000-0xe0000fff irq 11 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <nVidia nForce3 USB Controller> mem 0xe0001000-0xe0001fff irq 10 at device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0001000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0004000-0xe00040ff irq 10 at device 2.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe0004000
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pci0:6:0: Transition from D0 to D3
pci0: <simple comms, generic modem> at device 6.1 (no driver attached)
pci0:6:1: Transition from D0 to D3
atapci0: <nVidia nForce3 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2080-0x208f at device 8.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pcib1: <PCIBIOS PCI-PCI bridge> at device 10.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x3000-0x7fff
pcib1: memory decode 0xe0100000-0xe17fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0108000, size 11, enabled
pcib1: (null) requested memory range 0xe0108000-0xe01087ff: good
map[14]: type 1, range 32, base e0100000, size 14, enabled
pcib1: (null) requested memory range 0xe0100000-0xe0103fff: good
$PIR: 2:0 INTA routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00007000, size 8, enabled
pcib1: (null) requested I/O range 0x7000-0x70ff: in range
map[14]: type 1, range 32, base e0108800, size 8, enabled
pcib1: (null) requested memory range 0xe0108800-0xe01088ff: good
$PIR: 2:1 INTA routed to irq 10
found-> vendor=0x14e4, dev=0x4320, revid=0x03
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base e0104000, size 13, enabled
pcib1: (null) requested memory range 0xe0104000-0xe0105fff: good
$PIR: 2:2 INTA routed to irq 11
found-> vendor=0x104c, dev=0xac54, revid=0x01
bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0106000, size 12, enabled
pcib1: (null) requested memory range 0xe0106000-0xe0106fff: good
$PIR: 2:4 INTA routed to irq 11
found-> vendor=0x104c, dev=0xac54, revid=0x01
bus=2, slot=4, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0103, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0107000, size 12, enabled
pcib1: (null) requested memory range 0xe0107000-0xe0107fff: good
$PIR: 2:4 INTB routed to irq 10
found-> vendor=0x104c, dev=0x8201, revid=0x01
bus=2, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00007400, size 6, enabled
pcib1: (null) requested I/O range 0x7400-0x743f: in range
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xe0108000-0xe01087ff,0xe0100000-0xe0103fff irq 11 at device 0.0 on pci2
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe0108000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 51:3f:02:00:51:3f:02:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 52:3f:02:3f:02:00
fwe0: bpf attached
fwe0: Ethernet address: 52:3f:02:3f:02:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7000
pcib1: rl0 requested I/O range 0x7000-0x70ff: in range
pcib1: rl0 requested I/O range 0x7000-0x70ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0x7000-0x70ff mem 0xe0108800-0xe01088ff irq 10 at device 1.0 on pci2
pcib1: rl0 requested I/O range 0x7000-0x70ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0f:b0:49:f3:ec
rl0: [MPSAFE]
pci2: <network> at device 2.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> mem 0xe0106000-0xe0106fff irq 11 at device 4.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0106000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac54104c 0x02100107 0x06070001 0x00824008
0x10: 0xe0106000 0x020000a0 0x40040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x006d103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844b061 0x10000019 0x00020005 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <PCI-CardBus Bridge> mem 0xe0107000-0xe0107fff irq 10 at device 4.1 on pci2
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0107000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac54104c 0x02100107 0x06070001 0x00824008
0x10: 0xe0107000 0x020000a0 0x40060502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020a
0x40: 0x006d103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449161 0x10000019 0x00020005 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <base peripheral> at device 4.2 (no driver attached)
pcib2: <PCI-PCI bridge> at device 11.0 on pci0
pcib2: secondary bus 1
pcib2: subordinate bus 1
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xe2000000-0xe2ffffff
pcib2: prefetched decode 0xf0000000-0xf80fffff
pci1: <PCI bus> on pcib2
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0179, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e2000000, size 24, enabled
pcib2: (null) requested memory range 0xe2000000-0xe2ffffff: good
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib2: (null) requested memory range 0xf0000000-0xf7ffffff: good
map[18]: type 3, range 32, base f8000000, size 19, enabled
pcib2: (null) requested memory range 0xf8000000-0xf807ffff: good
$PIR: Found IRQ 10 for link 0x5 from 10 11
$PIR: 0:11 INTA routed to irq 10
pcib2: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
pnpbios: 15 devices, largest 164 bytes
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x3ff7ffff, size=0x3fe80000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 3 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 4 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c02: adding memory32 range 0xd0000-0xd3fff, size=0x4000, align=0x4000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xfe00-0xfe01, size=0x2, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xcfc00-0xcffff, size=0x400
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 14 device ID PNP0f13 (130fd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77f, size=0x8, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x2
pnpbios: handle 18 device ID PNP0401 (0104d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd4fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x9 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x9, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: strange result for test aux port (3).
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc01 0xc01 0xc01 0xc01
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc01 0xc01 0xc01 0xc01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xd0000-0xd3fff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0401> at port 0x378-0x37f on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 797945689 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on nVidia nForce3 chip
ad0: setting UDMA100 on nVidia nForce3 chip
ad0: 76319MB <TOSHIBA MK8025GAS KA024A> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: nVidia check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=BIOSDMA cable=40 wire
acd0: setting PIO4 on nVidia nForce3 chip
acd0: <NEC DVD+/-RW ND-6450A/2.36> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
link_elf: symbol _mtx_assert undefined
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.1 2005/07/18 12:23:41 kensmith Exp $
machine i386
cpu I686_CPU
ident GENERIC
#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
# To make an SMP kernel, the next two lines are needed
#options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device hptmv # Highpoint RocketRAID 182x
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device lge # Level 1 LXT1001 gigabit Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device ural # Ralink Technology RT2500USB wireless NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
device ath
device ath_hal
device ath_rate_onoe
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200508240057.j7O0vX6K069997>