Date: Thu, 22 Sep 2005 01:35:55 +0200 From: Michael Nottebrock <lofi@freebsd.org> To: freebsd-current@freebsd.org Subject: Re: UFS_EXTATTR(_AUTOSTART) broken on 6.0-BETA5 Message-ID: <200509220135.56826.lofi@freebsd.org> In-Reply-To: <200509220113.06667.lofi@freebsd.org> References: <200509220113.06667.lofi@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart3294537.xFM16Y9EOs
Content-Type: text/plain;
charset="iso-8859-15"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
On Thursday, 22. September 2005 01:13, Michael Nottebrock wrote:
> [...]
> ad0: 76351MB <SAMSUNG SV8004H QR100-12> at ata0-master UDMA100
> acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-103S 0115/E1.15> at
> ata1-master UDM
> A33
> Trying to mount root from ufs:/dev/ad0s1a
> panic: lockmgr: unknown locktype request 0
> Uptime: 2s
> Cannot dump. No dump device defined.
> Automatic reboot in 15 seconds - press a key on the console to abort
> --> Press a key on the console to reboot,
> --> or switch off the system now.
And here's a backtrace for it:
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
=46reeBSD 6.0-BETA5 #5: Thu Sep 22 01:27:39 CEST 2005
root@lofi.dyndns.org:/usr/obj/usr/src/sys/LOFI.ULE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Duron(tm) (1798.25-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x681 Stepping =3D 1
=20
=46eatures=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory =3D 536805376 (511 MB)
avail memory =3D 516079616 (492 MB)
ACPI APIC Table: <AMIINT VIA_K7 >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 12 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem=20
0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
ath0: <Atheros 5212> mem 0xdffe0000-0xdffeffff irq 17 at device 13.0 on pci0
ath0: Ethernet address: 00:09:5b:ec:e1:b1
ath0: mac 5.9 phy 4.3 radio 4.6
atapci0: <VIA 6420 SATA150 controller> port=20
0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f,0xd80=
0-0xd8ff=20
irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port=20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pci0: <serial bus, USB> at device 16.0 (no driver attached)
pci0: <serial bus, USB> at device 16.1 (no driver attached)
pci0: <serial bus, USB> at device 16.2 (no driver attached)
pci0: <serial bus, USB> at device 16.3 (no driver attached)
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem=20
0xdfffbd00-0xdfffbdff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0b:6a:b9:b0:30
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 dr=
q 2=20
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A, console
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1798249996 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76351MB <SAMSUNG SV8004H QR100-12> at ata0-master UDMA100
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-103S 0115/E1.15> at ata1-maste=
r=20
UDMA33
Trying to mount root from ufs:/dev/ad0s1a
panic: lockmgr: unknown locktype request 0
KDB: enter: panic
[thread pid 1 tid 100006 ]
Stopped at kdb_enter+0x2b: nop
db> trace
Tracing pid 1 tid 100006 td 0xc196e640
kdb_enter(c065f299) at kdb_enter+0x2b
panic(c065dcf5,0,c06b5030,0,c065dbf6) at panic+0xbb
lockmgr(c1b76af8,0,0,c196e640,d4481734) at lockmgr+0x58f
vfs_hash_insert(c1b76aa0,168,0,c196e640,d4481804) at vfs_hash_insert+0x26
ffs_vget(c1a86800,168,0,d4481804) at ffs_vget+0x171
ufs_lookup(d44818d0,0,60,0,2) at ufs_lookup+0xaa5
ufs_extattr_lookup(c1b76bb0,2,c067062a,d4481910,c196e640) at=20
ufs_extattr_lookup+0xf1
ufs_extattr_autostart(c1a86800,c196e640,c196bd00,1,1) at=20
ufs_extattr_autostart+0x4c
ffs_mountfs(c1b76cc0,c1a86800,c196e640,c1a839b0,0) at ffs_mountfs+0x7da
ffs_mount(c1a86800,c196e640,0,0,c1b77000) at ffs_mount+0x8c5
vfs_domount(c196e640,c1a83970,c1a83990,4001,c1a83940) at vfs_domount+0x571
vfs_donmount(c196e640,4001,d4481c14,c1a84740,6) at vfs_donmount+0xce
kernel_mount(c1a83920,4001,d4481c80,d4481cac,c051d2b4) at kernel_mount+0x38
kernel_vmount(4001,c0663ed0,c1a838f0,c0663ed7,c065d6e4) at kernel_vmount+0x=
37
vfs_mountroot_try(c1a83900,0,c196dc48,0,d4481cfc) at vfs_mountroot_try+0xb8
vfs_mountroot(c196dc48,c196e640,0,0,0) at vfs_mountroot+0xb3
start_init(0,d4481d38,c06b5a60,0,c065d21e) at start_init+0x35
fork_exit(c04b0f74,0,d4481d38) at fork_exit+0x61
fork_trampoline() at fork_trampoline+0x8
=2D-- trap 0x1, eip =3D 0, esp =3D 0xd4481d6c, ebp =3D 0 ---
=2D-=20
,_, | Michael Nottebrock | lofi@freebsd.org
(/^ ^\) | FreeBSD - The Power to Serve | http://www.freebsd.org
\u/ | K Desktop Environment on FreeBSD | http://freebsd.kde.org
--nextPart3294537.xFM16Y9EOs
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (FreeBSD)
iD8DBQBDMe5cXhc68WspdLARAg0KAJ4u9CqOD8d0Uf9m5/gS+ceZtq/vJwCgkBiG
JGuuSbFG5q50JEg3ZSfmePU=
=mvJB
-----END PGP SIGNATURE-----
--nextPart3294537.xFM16Y9EOs--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509220135.56826.lofi>