Date: Tue, 15 Nov 2005 22:52:07 +0100 From: Blue Raccoon <blue.raccoon@wanadoo.nl> To: Roland Smith <rsmith@xs4all.nl>, freebsd-questions@freebsd.org Subject: Re: USB Problems with Scanjet 3400c Message-ID: <200511152252.08260.blue.raccoon@wanadoo.nl> In-Reply-To: <20051115221322.419964@coonsden1> References: <20051115221322.419964@coonsden1>
next in thread | previous in thread | raw e-mail | index | archive | help
Roland, Thanks for your help, but... > You should verify that /usr/local/etc/sane.d/dll.conf has the line > niash It does. I removed the addition you suggested earlier. > You cut put a line like usb /dev/uscanner0 > in /usr/local/etc/sane.d/niash.conf I did (had to create the file). > The most simple solution would be to have the following in > /etc/devfs.rules: > [devrules=10] > add path 'uscanner*' mode 0666 > You'll also have to activate the ruleset 'devrules' by putting the > following line in /etc/rc.conf: > devfs_system_ruleset="devrules" I did (had to create devfs.rules). Then I rebooted, plugged the scanner in and got this: uscanner0: vendor 0x03f0 product 0x045, rev 1.00/0.00, addr 2 uscanner0: setting config no failed device_attach: uscanner0 attach returned 6 uhub0: port 2, set config at addr 2 failed uhub0: device problem (STALLED), disabling port 2 Which is almost identical to the boot-errors I had before (the first line is slightly different). Needless to say SANE still can't find the device. What can I say? 'Helaas'? - Jay
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511152252.08260.blue.raccoon>