Date: Sun, 25 Dec 2005 12:37:54 -0800 From: David Syphers <dsyphers@u.washington.edu> To: freebsd-stable@freebsd.org Subject: can't mount root after upgrade to RELENG_6 Message-ID: <200512251237.55091.dsyphers@u.washington.edu>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_jMwrDgPt9c7XC0Q
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I'm trying to upgrade a July 27 RELENG_5 box to today's RELENG_6. I got
through buildworld and make kernel, but upon rebooting I get dropped into a
mountroot prompt. Choosing '?' there only shows fd0. It's trying to mount
root from /dev/ad0s1a, which is correct. Booting in safe mode mounts root
fine and gives me a fully usable system, while booting with just ACPI
disabled gives me a "fatal trap 12: page fault while in kernel mode" panic
well before it tries to mount root.
A verbose dmesg from a failed boot (single user) is attached. My /etc/fstab is
below, though I don't think that's the issue.
Any ideas what the problem is?
Thanks,
-David
yggdrasil> cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
/dev/ad0s1b none swap sw 0 0
/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1e /tmp ufs rw 2 2
/dev/ad0s1f /usr ufs rw 2 2
/dev/ad0s1d /var ufs rw 2 2
/dev/acd0 /cdrom cd9660 ro,noauto 0 0
/dev/acd1 /cdrom1 cd9660 ro,noauto 0 0
--
"What's the good of having mastery over
cosmic balance and knowing the secrets of
fate if you can't blow something up?"
-Terry Pratchett
--Boundary-00=_jMwrDgPt9c7XC0Q
Content-Type: text/plain;
charset="us-ascii";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg"
FreeBSD 6.0-STABLE #0: Sun Dec 25 04:20:20 PST 2005
root@yggdrasil.seektruth.org:/usr/obj/usr/src/sys/YGGDRASIL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0775000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0775204.
Calibrating clock(s) ... i8254 clock: 1193168 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1526538794 Hz
CPU: AMD Athlon(tm) Processor (1526.54-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000001f6b7fff, 518598656 bytes (126611 pages)
avail memory = 520134656 (496 MB)
Table 'FACP' at 0x1fffb2fd
Table 'APIC' at 0x1ffffb88
MADT: Found table at 0x1ffffb88
MP Configuration Table version 1.4 found at 0xc009fc70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 3 ACPI ID 0: enabled
ACPI APIC Table: <PTLTD APIC >
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd6d0 (c00fd6d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6d0+0x11e
pnpbios: Found PnP BIOS data at 0xc00f7810
pnpbios: Entry = f0000:a07e Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 11 polarity: low
ioapic0: intpin 11 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002104
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700e1022)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 5 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 D 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 18 A 0x02 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 4 func 0
AcpiOsDerivePciId: bus 0 dev 4 func 5
AcpiOsDerivePciId: bus 0 dev 13 func 0
AcpiOsDerivePciId: bus 0 dev 14 func 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
AcpiOsDerivePciId: bus 0 dev 11 func 0
AcpiOsDerivePciId: bus 0 dev 12 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node 0xc2f191c0), AE_AML_BUFFER_LIMIT
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node 0xc2f191c0), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.PIB_.SIO0.LPT_ - AE_AML_BUFFER_LIMIT
ACPI timer: 1/2 0/3 0/3 0/3 0/3 0/3 1/1 0/3 0/3 1/2 -> 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.4.INTD at func 2: 9
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x700e, revid=0x13
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 3, range 32, base e0001000, size 12, enabled
map[18]: type 4, range 32, base 00001870, size 2, port disabled
found-> vendor=0x1022, dev=0x700f, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x008f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.PCI0.PIB_.LNKU:0)
ioapic0: Changing trigger for pin 9 to level
ioapic0: Changing polarity for pin 9 to low
pcib0: slot 4 INTD routed to irq 9 via \\_SB_.PCI0.PIB_.LNKU
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.PCI0.PIB_.LNKU:0)
pcib0: slot 4 INTD routed to irq 9 via \\_SB_.PCI0.PIB_.LNKU
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=4, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1102, dev=0x0002, revid=0x07
bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 16
found-> vendor=0x1102, dev=0x7002, revid=0x07
bus=0, slot=13, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001880, size 3, enabled
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base e0000000, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe1000000-0xe1ffffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0150, revid=0xa4
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x28 (1200 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base e1000000, size 24, enabled
pcib1: (null) requested memory range 0xe1000000-0xe1ffffff: good
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 4.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=50
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 4.2 (no driver attached)
pci0: <serial bus, USB> at device 4.3 (no driver attached)
pci0: <serial bus, SMBus> at device 4.4 (no driver attached)
pcm0: <Creative EMU10K1> port 0x1840-0x185f irq 16 at device 13.0 on pci0
pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x1840
emu: setmap (1f6000, 800), nseg=1, error=0
emu: setmap (215000, 1000), nseg=1, error=0
pcm0: <SigmaTel STAC9708/11 AC97 Codec (id = 0x83847608)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: Primary codec extended features surround DAC
pcm0: [MPSAFE]
emu: setmap (213000, 1000), nseg=1, error=0
emu: setmap (23e000, 1000), nseg=1, error=0
emu: setmap (1dc000, 1000), nseg=1, error=0
emu: setmap (1fa000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 1d8000, 1000; 0xc2fe4000 -> 1d8000
pcm0: sndbuf_setmap 236000, 1000; 0xc2fe2000 -> 236000
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xe0000000-0xe00000ff irq 17 at device 18.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:e0:18:40:b6:0f
rl0: [MPSAFE]
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xe001 0xe011 0xe001 0xe001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xe001 0xe009 0xe001 0xe001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 880C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Polled port
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xdc000-0xdffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 132742074 hz
Timecounter "TSC" frequency 1526538794 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=08
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reinit done ..
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=08
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=58
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=58
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=08 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=08 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
--Boundary-00=_jMwrDgPt9c7XC0Q--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512251237.55091.dsyphers>