Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Jan 2006 08:37:46 -0600
From:      Nicholas Riley <njriley@uiuc.edu>
To:        Gianluca Camporeale <gias@eyenet.it>
Cc:        freebsd-sparc64@freebsd.org
Subject:   Re: NFS install writability on Netra t1 105
Message-ID:  <20060103143746.GA40204@uiuc.edu>
In-Reply-To: <20060103142149.3311c15b@blackdog.umbrella.net>
References:  <20060103013246.GB34161@uiuc.edu> <20060103142149.3311c15b@blackdog.umbrella.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 03, 2006 at 02:21:49PM +0100, Gianluca Camporeale wrote:
> could you explain the procedure that you used to boot from
> network and start installation from nfs? I'll tray netboot with
> tftp installation on ultra2 and ultra5 machines but with no
> fortune.

Sure.  At worst you'll get stuck like I am :-)

I installed rarpd (on Linux, since I could not get the OS X version to
do anything beyond printing "got a packet") and edited /etc/ethers as
follows:

  08:00:20:c2:8d:f0 10.0.0.200

where the first part is the MAC address of the first ethernet
interface on the Sun, and the second is an IP address I picked.  Newer
Suns can do DHCP, but I think the OpenBoot version on mine is too old.

Then I copied boot/loader from the first FreeBSD install CD to
/tftpboot, made a symlink named with a hex version of the IP address,
and started tftpd (on a different machine from the rarpd server).  If
you're using OS X 10.4 as I was, you can start tftpd with "sudo
launchctl start com.apple.tftpd".  The relevant part of the
(/private)/tftpboot directory looks like:

  lrwxr-xr-x   1 root  wheel       6B Dec 31 14:02 0A0000C8@ -> loader
  -r-xr-xr-x   1 root  wheel     195K Dec 31 14:01 loader*
  
Next I set up a NFS server.  I first tried directly exporting the
automounted CD image (/Volumes/FreeBSD_Install), but when I tried to
mount that, the mount point was empty; not quite sure what was going
on there.  So instead, I copied the contents to a local disk:

  % nidump exports /
  /Users/Shared/FreeBSD_Install  -ro -mapall=nobody 
  
(that'd be /etc/exports or /etc/dfs/dfstab on a more normal Unix
system) and I was able to mount it successfully.

Finally, I set up a DHCP server (ISC dhcpd 3) to serve the NFS root
information.  The network already has a DHCP server device which I
couldn't add arbitrary information to - actually, I plan for this Sun
to be the new DHCP server if I ever get it installed!  dhcpd.conf is:

  ddns-update-style none;
  
  default-lease-time 600;
  max-lease-time 7200;
  
  log-facility local7;
  
  subnet 10.0.0.0 netmask 255.255.255.0 {
  }
  
  host install {
    hardware ethernet 08:00:20:c2:8d:f0;
    fixed-address 10.0.0.200;
    always-reply-rfc1048 on;
    option root-path "10.0.0.3:/Users/Shared/FreeBSD_Install";
  }
  
At that point all that remained was typing 'boot net' on the Sun.

  Boot device: /pci@1f,0/pci@1,1/network@1,1  File and args: /platform/sun4u/kernel/unix
  34e00 Consoles: Open Firmware console  
  
  FreeBSD/sparc64 bootstrap loader, Revision 1.0
  (root@s-dallas.cse.buffalo.edu, Wed Nov  2 09:45:36 UTC 2005)
  bootpath="/pci@1f,0/pci@1,1/network@1,1"
  boot: ethernet address: 08:00:20:c2:8d:f0
  net_open: server addr: 10.0.0.3
  net_open: server path: /Users/Shared/FreeBSD_Install

There'll be a short delay, then "Loading /boot/defaults/loader.conf",
then a longer delay before the FreeBSD kernel starts booting.

>From looking at boot/loader.conf on the CD, it looks like I'm supposed
to get a MFS root, but instead I get a (read-only) NFS root.  During
boot I do see this line:

  md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc056435

and I was able to mount /dev/md0 after startup, but I can't figure out
how to get it to be used as a root device.

-- 
Nicholas Riley <njriley@uiuc.edu> | <http://www.uiuc.edu/ph/www/njriley>;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060103143746.GA40204>