Date: Wed, 18 Jan 2006 17:05:02 +0200 From: "Dave Raven" <dave@raven.za.net> To: "'Gleb Smirnoff'" <glebius@FreeBSD.org> Cc: freebsd-net@FreeBSD.org Subject: RE: em driver + VLAN's Message-ID: <20060118150533.AA33C43D9D@mx1.FreeBSD.org> In-Reply-To: <20060118145830.GS83922@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
FreeBSD 4.9 - char em_driver_version[] = "1.7.16"; I've tried multiple bridge configurations - from bridging just em0,em1 to bridging two vlan's attached to each card. Unfortunately I don't have access to the box at the moment - if its still necessary I will fetch the information tomorrow (ifconfig etc) To sum up its something like the following net.inet.ether.bridge_config=em0,em1 net.inet.ether.bridge=1 Or vlan0,vlan1 with: ifconfig vlan0 create ifconfig vlan1 create ifconfig vlan0 vlan 100 vlandev em0 ifconfig vlan1 vlan 100 vlandev em1 If I change to using fxp it immediately works.. Thanks for the help Dave -----Original Message----- From: Gleb Smirnoff [mailto:glebius@FreeBSD.org] Sent: 18 January 2006 04:59 PM To: Dave Raven Cc: freebsd-net@FreeBSD.org Subject: Re: em driver + VLAN's On Wed, Jan 18, 2006 at 03:12:27PM +0200, Dave Raven wrote: D> Hi all, D> I'm having an interesting problem at the moment. I want to bridge D> between two cisco switches on trunk ports. Basically bridging vlans - D> if I bridge my two main interfaces it works fine if they are fxp, but D> not when I use em cards... D> D> Could this be related to the driver, or BSD in some way? This probably can. What FreeBSD version are you using? Can you please show ifconfig output and bridge configuration? -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060118150533.AA33C43D9D>