Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 31 Jan 2006 00:00:26 -0800 (PST)
From:      gahn <ipfreak@yahoo.com>
To:        freebsd general questions <freebsd-questions@freebsd.org>, mpd <mpd-users@lists.sourceforge.net>
Subject:   routing issue of mpd
Message-ID:  <20060131080026.90075.qmail@web52113.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Hi:

I got mpd working and logined into pptp server through
internet. From my pc, I can ping internal interface of
the pptp server, 192.168.128.1 (my pc address is
192.168.128.10). the problem is that I can't ping
anything beyond that, such as 192.168.128.2 (it
actually is an interface of a router, on the same
subnet).

>From cmd of windows, with command "ipconfig":

Ethernet adapter Local Area Connection:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . :
254.254.254.100
        Subnet Mask . . . . . . . . . . . :
255.255.255.0
        Default Gateway . . . . . . . . . :
254.254.254.1

PPP adapter test:

        Connection-specific DNS Suffix  . :
        IP Address. . . . . . . . . . . . :
192.168.128.10
        Subnet Mask . . . . . . . . . . . :
255.255.255.255
        Default Gateway . . . . . . . . . :

So how could I change the length of the masking of the
ppp adapter?

once I can change the length of the masking bits, then
I can route my traffic into the rfc1918 networks that
behind of the vpn server.

the manual page of:

http://www.bretterklieber.com/mpd/doc3/mpd22.html

don't seem to be matter though.

here is the mpd.conf:

default:
        load pptp0

pptp0:
        new -i ng0 pptp0 pptp0
        set ipcp ranges 192.168.128.1/21
192.168.128.10/21
        load common

common:
        set iface disable on-demand
        set iface enable proxy-arp
        set iface idle 1800
        set iface enable tcpmssfix
        set bundle disable multilink
        set bundle enable compression
        set bundle yes crypt-reqd
        set link no pap chap
        set link enable chap-msv2
        set link keep-alive 10 60
        set link enable acfcomp protocomp
        set ipcp yes vjcomp
        set ipcp dns 192.168.64.96
        set ccp yes mppc
        set ccp yes mpp-e128

BTW, mpd4 seems to be not very stable; I switched back
to 3.18 and it works fine.

TIA

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060131080026.90075.qmail>