Date: Fri, 3 Feb 2006 13:18:18 -0800 (PST) From: Daniel Valencia <fetrovsky@yahoo.com> To: freebsd-hackers@freebsd.org Subject: Problems with SMP in amd64 Message-ID: <20060203211818.34971.qmail@web53901.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hello...
I've been trying to update my system in the STABLE branch, and every time I install the new kernel, built using SMP, the system won't boot... as I don't know where the problem could be and it doesn't seem to have been fixed, I thought it a good idea to let you guys know...
The boot process hangs right after detecting the first SATA disk (a maxtor 250GB, ad4 at ata2) and before acknowledging the second SATA disk (same model, ad6 at ata3). The system boots properly in 6.0-RELEASE using GENERIC.
I'm using a Gigabyte motherboard with nForce4 iDNA chipset, and a dualcore athlon64 3800+ processor.
The system doesn't boot properly under 6.0-RELEASE using SMP either. Here goes my dmesg...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005
root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <GBT AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
Hyperthreading: 2 logical CPUs
real memory = 939458560 (895 MB)
avail memory = 895479808 (853 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <GBT AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
pci_link0: <ACPI PCI Link LNK1> irq 5 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 5 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNK4> on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LNK6> on acpi0
pci_link6: <ACPI PCI Link LNK7> irq 10 on acpi0
pci_link7: <ACPI PCI Link LNK8> on acpi0
pci_link8: <ACPI PCI Link LUBA> irq 10 on acpi0
pci_link9: <ACPI PCI Link LUBB> on acpi0
pci_link10: <ACPI PCI Link LMAC> irq 11 on acpi0
pci_link11: <ACPI PCI Link LACI> on acpi0
pci_link12: <ACPI PCI Link LAZA> on acpi0
pci_link13: <ACPI PCI Link LPMU> on acpi0
pci_link14: <ACPI PCI Link LMCI> on acpi0
pci_link15: <ACPI PCI Link LSMB> irq 11 on acpi0
pci_link16: <ACPI PCI Link LUB2> irq 5 on acpi0
pci_link17: <ACPI PCI Link LIDE> on acpi0
pci_link18: <ACPI PCI Link LSID> irq 11 on acpi0
pci_link19: <ACPI PCI Link LFID> irq 10 on acpi0
pci_link20: <ACPI PCI Link APC1> irq 0 on acpi0
pci_link21: <ACPI PCI Link APC2> irq 0 on acpi0
pci_link22: <ACPI PCI Link APC3> irq 0 on acpi0
pci_link23: <ACPI PCI Link APC4> irq 0 on acpi0
pci_link24: <ACPI PCI Link APC5> irq 0 on acpi0
pci_link25: <ACPI PCI Link APC6> irq 0 on acpi0
pci_link26: <ACPI PCI Link APC7> irq 0 on acpi0
pci_link27: <ACPI PCI Link APC8> irq 0 on acpi0
pci_link28: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link30: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link32: <ACPI PCI Link APMU> irq 0 on acpi0
pci_link33: <ACPI PCI Link AAZA> irq 0 on acpi0
pci_link34: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link35: <ACPI PCI Link APCS> irq 0 on acpi0
pci_link36: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link37: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link38: <ACPI PCI Link APCZ> irq 0 on acpi0
pci_link39: <ACPI PCI Link APSI> irq 0 on acpi0
pci_link40: <ACPI PCI Link APSJ> irq 0 on acpi0
ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT
ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT
ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT
can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link35: BIOS IRQ 11 for -2145774616.10.INTA is invalid
pci_link28: BIOS IRQ 10 for -2145774616.11.INTA is invalid
pci_link36: BIOS IRQ 5 for -2145774616.11.INTB is invalid
pci_link30: BIOS IRQ 11 for -2145774616.20.INTA is invalid
pci_link39: BIOS IRQ 11 for -2145774616.14.INTA is invalid
pci_link40: BIOS IRQ 10 for -2145774616.15.INTA is invalid
pci_link26: BIOS IRQ 10 for -2145774616.5.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <memory, RAM> at device 10.2 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xf5104000-0xf5104fff irq 21 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf5100000-0xf51000ff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xf5103000-0xf5103fff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <GENERIC ATA controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xf5102000-0xf5102fff irq 20 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xf5000000-0xf50000ff irq 16 at device 6.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:40:f4:cd:f6:74
pci1: <multimedia, audio> at device 7.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xa800-0xa87f mem 0xf5001000-0xf50017ff irq 18 at device 14.0 on pci1
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:14:85:00:36:63:1b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:14:36:63:1b
fwe0: Ethernet address: 02:00:14:36:63:1b
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <bridge> at device 20.0 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: vendor 0x046d product 0x08b2, rev 1.10/0.00, addr 3
Timecounter "TSC" frequency 2009158085 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <TOSHIBA CD/DVDW SDR5372V/TU11> at ata0-master UDMA33
acd1: CDRW <SONY CD-RW CRX230E/QYS1> at ata0-slave UDMA33
ad4: 239371MB <Maxtor 6Y250M0 YAR512W0> at ata2-master UDMA33
ad6: 239372MB <Maxtor 6Y250M0 YAR512W0> at ata3-master UDMA33
Trying to mount root from ufs:/dev/ad4s2a
rl0: link state changed to UP
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060203211818.34971.qmail>