Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 14 Feb 2006 11:44:59 +0300
From:      Gleb Smirnoff <glebius@FreeBSD.org>
To:        Harti Brandt <harti@FreeBSD.org>
Cc:        freebsd-net@FreeBSD.org, Anders Nordby <anders@FreeBSD.org>, kuriyama@FreeBSD.org, demon@FreeBSD.org
Subject:   Re: 64-bit SNMP counters for FreeBSD && graphing bandwidth usage
Message-ID:  <20060214084459.GL86448@cell.sick.ru>
In-Reply-To: <20060214093513.F5083@beagle.kn.op.dlr.de>
References:  <20060206092443.GA61116@totem.fix.no> <20060207141131.GU877@FreeBSD.org> <20060213173008.GA14643@totem.fix.no> <20060214090531.X5083@beagle.kn.op.dlr.de> <20060214083010.GB41864@totem.fix.no> <20060214093513.F5083@beagle.kn.op.dlr.de>

next in thread | previous in thread | raw e-mail | index | archive | help

--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=koi8-r
Content-Disposition: inline

On Tue, Feb 14, 2006 at 09:39:00AM +0100, Harti Brandt wrote:
H> AN>I changed port to 163 cause I am actually using net-snmp snmpd on port
H> AN>161 still. Anyway, it seems bsnmpd insists these are 10 mbps interfaces?
H> AN>Why so?
H> 
H> The driver reports a speed of 10Mbits/sec. ifHighSpeed is ifi_baudrate 
H> divided by 10^6 (and rounded). This is the default set by ether_ifattach() 
H> if the driver did not set another value. It seems that bge never sets that 
H> value so you end up with the default. This looks like a bug.

Harti, we are thinking in parallel :)

Andres, pls try the attached patch.

-- 
Totus tuus, Glebius.
GLEBIUS-RIPN GLEB-RIPE

--FCuugMFkClbJLl1L
Content-Type: text/plain; charset=koi8-r
Content-Disposition: attachment; filename="if_bge.baudr"

Index: if_bge.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/bge/if_bge.c,v
retrieving revision 1.118
diff -u -r1.118 if_bge.c
--- if_bge.c	30 Jan 2006 13:45:55 -0000	1.118
+++ if_bge.c	14 Feb 2006 08:43:24 -0000
@@ -2192,6 +2192,7 @@
 	ifp->if_snd.ifq_drv_maxlen = BGE_TX_RING_CNT - 1;
 	IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
 	IFQ_SET_READY(&ifp->if_snd);
+	ifp->if_baudrate = IF_Gbps(1);
 	ifp->if_hwassist = BGE_CSUM_FEATURES;
 	ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING |
 	    IFCAP_VLAN_MTU | IFCAP_VLAN_HWCSUM;

--FCuugMFkClbJLl1L--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060214084459.GL86448>