Date: Fri, 17 Feb 2006 08:45:26 +0100 From: Wilko Bulte <wb@freebie.xs4all.nl> To: John Baldwin <jhb@freebsd.org> Cc: alpha@freebsd.org Subject: Re: special test request for 6.1-BETA1 on ATA disks Message-ID: <20060217074526.GA51679@freebie.xs4all.nl> In-Reply-To: <20060217073137.GB51498@freebie.xs4all.nl> References: <20060215231911.GB42943@freebie.xs4all.nl> <Pine.SOC.4.61.0602162322290.969@tea.blinkenlights.nl> <20060216225244.GC49268@freebie.xs4all.nl> <200602161815.17427.jhb@freebsd.org> <20060217073137.GB51498@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 17, 2006 at 08:31:37AM +0100, Wilko Bulte wrote..
> On Thu, Feb 16, 2006 at 06:15:15PM -0500, John Baldwin wrote..
> > On Thursday 16 February 2006 17:52, Wilko Bulte wrote:
> > > On Thu, Feb 16, 2006 at 11:23:11PM +0100, Sten Spans wrote..
> > >
> > > > On Thu, 16 Feb 2006, Wilko Bulte wrote:
> > > > >On Thu, Feb 16, 2006 at 12:19:11AM +0100, Wilko Bulte wrote..
> > > > >
> > > > >>Folks,
> > > > >>
> > > > >>I am getting the strong impression that there is something hosed
> > > > >>related to ATA at least on the DS10 and DS10L. Test installs
> > > > >>on ATA disks work fine, but the first boot of the installed disk
> > > > >>fails miserably, typically the symptom is that the first shell won't
> > > > >>start or similar. I got:
> > > > >>
> > > > >>Trying to mount root from ufs:/dev/ad0a
> > > > >>/libexec/ld-elf.so.1: /lib/libc.so.6: Unsupported relocation type
> > > > >>1611047936
> > > > >>in non-PLT relocations
> > > > >>
> > > > >>Observed on one DS10 and one DS10L. The problem does not
> > > > >>occur when you use a SCSI disk (which I typically do so I missed this
> > > > >>before).
> > > > >>
> > > > >>Those of you who own this machine type and have a spare IDE drive,
> > > > >>can you please test it? Other reports for different system models
> > > > >>are interesting too of course.
> > > > >
> > > > >A check of 5.5-BETA1 would be interesting too.
> > > >
> > > > I'll give it a go this weekend on my ds10
> > > > (which also normally runs scsi :)
> > >
> > > Looks like it is not only DS10, my 164SX has similar probs as well.
> > > 5.5-BETA1 and 6.1-BETA1 have it. In total we have seen it on 2 DS10L,
> > > one DS10 and a 164SX now. SCSI is just fine.
> >
> > What if you turn dma off via 'hw.ata.dma=0' in the loader?
>
> Haven't tried yet. DS10s are currently building BETA2
164SX with 6.1-BETA1 boot CD with or without DMA disabling has another
problem :/
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 533176524 Hz quality 800
Timecounters tick every 0.976 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc0000a28400
ad0: 38166MB <Seagate ST340016A 3.19> at ata0-master WDMA2
acd0: CDROM <TOSHIBA CD-ROM XM-6302B/1017> at ata1-master BIOSPIO
fatal kernel trap:
trap entry = 0x4 (unaligned access fault)
cpuid = 0
faulting va = 0xfffffc00011ce5c2
opcode = 0x28
register = 0x1
pc = 0xfffffc00004cec6c
ra = 0xfffffc00004ceeac
sp = 0xfffffe001a397bc0
curthread = 0xfffffc003ebe3500
pid = 2, comm = g_event
panic: trap
cpuid = 0
Uptime: 2s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
Poul is currently trying to think of a clue here.
Alpha ATA country is no joy right now. I have no SCSI on the 164sx, so
will wait until the BETA2 builds are done.
--
Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060217074526.GA51679>