Date: Thu, 6 Apr 2006 11:52:18 +0400 (MSD) From: Anton Menshutin <fp@chg.ru> To: freebsd-acpi@freebsd.org Subject: se7520af2 intel motherboard acpi problem Message-ID: <20060406113433.O6088@netserv1.chg.ru>
next in thread | raw e-mail | index | archive | help
Hi all,
We bought new server with se7520af2 intel motherboard with 2 XEONs
and found a lot of problems with it under FreeBSD. With ACPI enabled
system does not work correctly with pci-express busses, hangs during reboot.
With ACPI disabled it sometimes crashes during boot when mounting
filesystems from mboard SATA controller, but pci-express based areca raid
controller works fine. Depending on verison of the system kernel works
only with one or two CPU's (i.e. hyperthreading does not work at all).
Below is the dmesg output with acpi enabled:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-BETA2 #0: Thu Mar 30 14:39:56 UTC 2006
root@:/usr/src/sys/amd64/compile/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8099f000.
ACPI APIC Table: <A M I OEMAPIC >
Calibrating clock(s) ... i8254 clock: 1193154 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793014672 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000800<SYSCALL,LM>
Hyperthreading: 2 logical CPUs
real memory = 4831838208 (4608 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000a9d000 - 0x00000000d78affff, 3605082112 bytes (880147 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory = 4126433280 (3935 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 6, logical 0:2
APIC ID: physical 7, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: edge
lapic6: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: edge
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Ignoring local NMI routed to ACPI CPU 8
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086)
AcpiOsDerivePciId: bus 9 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 2
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 15 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 15 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 15
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x410
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
cpu2: <ACPI CPU> on acpi0
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
cpu3: <ACPI CPU> on acpi0
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0c
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3591, revid=0x0c
bus=0, slot=0, func=1
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3594, revid=0x0c
bus=0, slot=1, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
MSI supports 2 messages
map[10]: type 1, range 32, base fcffe000, size 12, memory disabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3595, revid=0x0c
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3597, revid=0x0c
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3599, revid=0x0c
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x359a, revid=0x0c
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 0000bc00, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type 4, range 32, base 0000c080, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fcfffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
found-> vendor=0x8086, dev=0x24d1, revid=0x02
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0045, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 0000cc00, size 3, enabled
map[14]: type 4, range 32, base 0000c880, size 2, enabled
map[18]: type 4, range 32, base 0000c800, size 3, enabled
map[1c]: type 4, range 32, base 0000c480, size 2, enabled
map[20]: type 4, range 32, base 0000c400, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00000540, size 5, enabled
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1: secondary bus 9
pcib1: subordinate bus 11
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfea00000-0xfebfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.EPA0 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib1
pci9: physical bus=9
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=9, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0326, revid=0x09
bus=9, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base feafe000, size 12, enabled
pcib1: (null) requested memory range 0xfeafe000-0xfeafefff: good
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=9, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0327, revid=0x09
bus=9, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base feaff000, size 12, enabled
pcib1: (null) requested memory range 0xfeaff000-0xfeafffff: good
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci11: <ACPI PCI bus> on pcib2
pci11: physical bus=11
pci9: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci9
pcib3: secondary bus 10
pcib3: subordinate bus 10
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib3
pci10: physical bus=10
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=10, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base feba0000, size 17, enabled
pcib3: (null) requested memory range 0xfeba0000-0xfebbffff: good
pcib1: (null) requested memory range 0xfeba0000-0xfebbffff: good
map[20]: type 4, range 32, base 0000e880, size 6, enabled
pcib3: (null) requested I/O range 0xe880-0xe8bf: in range
pcib1: (null) requested I/O range 0xe880-0xe8bf: in range
pcib3: matched entry for 10.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 52
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=10, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base febe0000, size 17, enabled
pcib3: (null) requested memory range 0xfebe0000-0xfebfffff: good
pcib1: (null) requested memory range 0xfebe0000-0xfebfffff: good
map[20]: type 4, range 32, base 0000ec00, size 6, enabled
pcib3: (null) requested I/O range 0xec00-0xec3f: in range
pcib1: (null) requested I/O range 0xec00-0xec3f: in range
pcib3: matched entry for 10.4.INTB
pcib3: slot 4 INTB hardwired to IRQ 53
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 52 at device 4.0 on pci10
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeba0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:07:e9:32:d2:1e
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 53 at device 4.1 on pci10
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:07:e9:32:d2:1f
em1: Speed:N/A Duplex:N/A
pci9: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib4: secondary bus 6
pcib4: subordinate bus 8
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0xfe900000-0xfe9fffff
pcib4: prefetched decode 0xfbc00000-0xfbffffff
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=6, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib5: secondary bus 8
pcib5: subordinate bus 8
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfe900000-0xfe9fffff
pcib5: prefetched decode 0xfbc00000-0xfbffffff
device_attach: pcib5 attach returned 6
pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci6
pcib6: secondary bus 7
pcib6: subordinate bus 7
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
device_attach: pcib6 attach returned 6
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib7: secondary bus 3
pcib7: subordinate bus 5
pcib7: I/O decode 0x0-0x0
pcib7: memory decode 0xfe800000-0xfe8fffff
pcib7: prefetched decode 0xfb800000-0xfbbfffff
pci3: <ACPI PCI bus> on pcib7
pci3: physical bus=3
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=3, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=3, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pcib8: secondary bus 5
pcib8: subordinate bus 5
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfe800000-0xfe8fffff
pcib8: prefetched decode 0xfb800000-0xfbbfffff
device_attach: pcib8 attach returned 6
pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pcib9: secondary bus 4
pcib9: subordinate bus 4
pcib9: I/O decode 0x0-0x0
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
device_attach: pcib9 attach returned 6
pcib10: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pcib10: secondary bus 2
pcib10: subordinate bus 2
pcib10: I/O decode 0x0-0x0
pcib10: memory decode 0xfff00000-0xfffff
pcib10: prefetched decode 0xfff00000-0xfffff
pcib10: could not get PCI interrupt routing table for \\_SB_.PCI0.EPC1 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib10
pci2: physical bus=2
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc080-0xc09f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfcfffc00-0xfcffffff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfcfffc00
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib11: secondary bus 1
pcib11: subordinate bus 1
pcib11: I/O decode 0xd000-0xdfff
pcib11: memory decode 0xfd000000-0xfe7fffff
pcib11: prefetched decode 0xfff00000-0xfffff
pcib11: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib11
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib11: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib11: (null) requested I/O range 0xd800-0xd8ff: in range
map[18]: type 1, range 32, base fe7ff000, size 12, enabled
pcib11: (null) requested memory range 0xfe7ff000-0xfe7fffff: good
pcib11: matched entry for 1.12.INTA
pcib11: slot 12 INTA hardwired to IRQ 17
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 18 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880
ata2: reset tp1 mask=01 ostat0=80 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: irq maps: 0xcca1 0xccb1 0xcca1 0xcca1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xcca1 0xcca9 0xcca1 0xcca1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 99750200 hz
Timecounter "TSC" frequency 2793014672 Hz quality -100
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff805f53f0, 0) error 6
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH5 chip
acd0: setting UDMA33 on ICH5 chip
acd0: <SONY DVD-ROM DDU1613/9YS2> DVDROM drive at ata0 as master
acd0: read 6890KB/s (6890KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 190782MB <Seagate ST3200826AS 3.03> at ata2-master SATA150
ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x07000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
ioapic2: routing intpin 4 (PCI IRQ 52) to cluster 0
ioapic2: routing intpin 5 (PCI IRQ 53) to cluster 0
GEOM: new disk ad4
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
with acpi disabled :
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-BETA2 #0: Thu Mar 30 14:39:56 UTC 2006
root@:/usr/src/sys/amd64/compile/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8099f000.
Calibrating clock(s) ... i8254 clock: 1193147 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793016779 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000800<SYSCALL,LM>
Hyperthreading: 2 logical CPUs
real memory = 4831838208 (4608 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000a9d000 - 0x00000000d78affff, 3605082112 bytes (880147 pages)
0x0000000100000000 - 0x000000011ffeffff, 536805376 bytes (131056 pages)
avail memory = 4126478336 (3935 MB)
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086)
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0c
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3591, revid=0x0c
bus=0, slot=0, func=1
class=ff-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3594, revid=0x0c
bus=0, slot=1, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
MSI supports 2 messages
map[10]: type 1, range 32, base fcffe000, size 12, memory disabled
found-> vendor=0x8086, dev=0x3595, revid=0x0c
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
found-> vendor=0x8086, dev=0x3597, revid=0x0c
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
found-> vendor=0x8086, dev=0x3599, revid=0x0c
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
found-> vendor=0x8086, dev=0x359a, revid=0x0c
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 0000bc00, size 5, enabled
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type 4, range 32, base 0000c000, size 5, enabled
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type 4, range 32, base 0000c080, size 5, enabled
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=15
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fcfffc00, size 10, enabled
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
found-> vendor=0x8086, dev=0x24d1, revid=0x02
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0045, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 0000cc00, size 3, enabled
map[14]: type 4, range 32, base 0000c880, size 2, enabled
map[18]: type 4, range 32, base 0000c800, size 3, enabled
map[1c]: type 4, range 32, base 0000c480, size 2, enabled
map[20]: type 4, range 32, base 0000c400, size 4, enabled
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
map[20]: type 4, range 32, base 00000540, size 5, enabled
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <PCI-PCI bridge> irq 10 at device 2.0 on pci0
pcib1: secondary bus 9
pcib1: subordinate bus 11
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfea00000-0xfebfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci9: <PCI bus> on pcib1
pci9: physical bus=9
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=9, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0326, revid=0x09
bus=9, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base feafe000, size 12, enabled
pcib1: (null) requested memory range 0xfeafe000-0xfeafefff: good
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=9, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0327, revid=0x09
bus=9, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base feaff000, size 12, enabled
pcib1: (null) requested memory range 0xfeaff000-0xfeafffff: good
pcib2: <PCI-PCI bridge> at device 0.0 on pci9
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci11: <PCI bus> on pcib2
pci11: physical bus=11
pci9: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <PCI-PCI bridge> at device 0.2 on pci9
pcib3: secondary bus 10
pcib3: subordinate bus 10
pcib3: I/O decode 0xe000-0xefff
pcib3: memory decode 0xfeb00000-0xfebfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci10: <PCI bus> on pcib3
pci10: physical bus=10
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=10, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base feba0000, size 17, enabled
pcib3: (null) requested memory range 0xfeba0000-0xfebbffff: good
pcib1: (null) requested memory range 0xfeba0000-0xfebbffff: good
map[20]: type 4, range 32, base 0000e880, size 6, enabled
pcib3: (null) requested I/O range 0xe880-0xe8bf: in range
pcib1: (null) requested I/O range 0xe880-0xe8bf: in range
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=10, slot=4, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base febe0000, size 17, enabled
pcib3: (null) requested memory range 0xfebe0000-0xfebfffff: good
pcib1: (null) requested memory range 0xfebe0000-0xfebfffff: good
map[20]: type 4, range 32, base 0000ec00, size 6, enabled
pcib3: (null) requested I/O range 0xec00-0xec3f: in range
pcib1: (null) requested I/O range 0xec00-0xec3f: in range
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xe880-0xe8bf mem 0xfeba0000-0xfebbffff irq 10 at device 4.0 on pci10
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeba0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe880
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:07:e9:32:d2:1e
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 11 at device 4.1 on pci10
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfebe0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:07:e9:32:d2:1f
em1: Speed:N/A Duplex:N/A
pci9: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <PCI-PCI bridge> irq 10 at device 4.0 on pci0
pcib4: secondary bus 6
pcib4: subordinate bus 8
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0xfe900000-0xfe9fffff
pcib4: prefetched decode 0xfbc00000-0xfbffffff
pci6: <PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=6, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib5: <PCI-PCI bridge> at device 0.0 on pci6
pcib5: secondary bus 8
pcib5: subordinate bus 8
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfe900000-0xfe9fffff
pcib5: prefetched decode 0xfbc00000-0xfbffffff
pci8: <PCI bus> on pcib5
pci8: physical bus=8
found-> vendor=0x17d3, dev=0x1230, revid=0x00
bus=8, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x00d6, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 1, range 32, base fe9ff000, size 12, enabled
pcib5: (null) requested memory range 0xfe9ff000-0xfe9fffff: good
pcib4: (null) requested memory range 0xfe9ff000-0xfe9fffff: good
map[18]: type 3, range 32, base fbc00000, size 22, enabled
pcib5: (null) requested memory range 0xfbc00000-0xfbffffff: good
pcib4: (null) requested memory range 0xfbc00000-0xfbffffff: good
arcmsr0: <ARECA ARC1230 PCI-EXPRESS 12 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside)
Driver Version 1.20.00.02> mem 0xfe9ff000-0xfe9fffff,0xfbc00000-0xfbffffff irq 5 at device 14.0 on pci8
arcmsr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe9ff000
arcmsr0: [GIANT-LOCKED]
pcib6: <PCI-PCI bridge> at device 0.2 on pci6
pcib6: secondary bus 7
pcib6: subordinate bus 7
pcib6: I/O decode 0x0-0x0
pcib6: memory decode 0xfff00000-0xfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci7: <PCI bus> on pcib6
pci7: physical bus=7
pcib7: <PCI-PCI bridge> irq 10 at device 6.0 on pci0
pcib7: secondary bus 3
pcib7: subordinate bus 5
pcib7: I/O decode 0x0-0x0
pcib7: memory decode 0xfe800000-0xfe8fffff
pcib7: prefetched decode 0xfb800000-0xfbbfffff
pci3: <PCI bus> on pcib7
pci3: physical bus=3
found-> vendor=0x8086, dev=0x0370, revid=0x00
bus=3, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x0372, revid=0x00
bus=3, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0146, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
pcib8: <PCI-PCI bridge> at device 0.0 on pci3
pcib8: secondary bus 5
pcib8: subordinate bus 5
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0xfe800000-0xfe8fffff
pcib8: prefetched decode 0xfb800000-0xfbbfffff
pci5: <PCI bus> on pcib8
pci5: physical bus=5
found-> vendor=0x17d3, dev=0x1230, revid=0x00
bus=5, slot=14, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x00d6, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 1, range 32, base fe8ff000, size 12, enabled
pcib8: (null) requested memory range 0xfe8ff000-0xfe8fffff: good
pcib7: (null) requested memory range 0xfe8ff000-0xfe8fffff: good
map[18]: type 3, range 32, base fb800000, size 22, enabled
pcib8: (null) requested memory range 0xfb800000-0xfbbfffff: good
pcib7: (null) requested memory range 0xfb800000-0xfbbfffff: good
arcmsr1: <ARECA ARC1230 PCI-EXPRESS 12 PORTS SATA RAID CONTROLLER (RAID6-ENGINE Inside)
Driver Version 1.20.00.02> mem 0xfe8ff000-0xfe8fffff,0xfb800000-0xfbbfffff irq 5 at device 14.0 on pci5
arcmsr1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8ff000
arcmsr1: [GIANT-LOCKED]
pcib9: <PCI-PCI bridge> at device 0.2 on pci3
pcib9: secondary bus 4
pcib9: subordinate bus 4
pcib9: I/O decode 0x0-0x0
pcib9: memory decode 0xfff00000-0xfffff
pcib9: prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib9
pci4: physical bus=4
pcib10: <PCI-PCI bridge> irq 10 at device 7.0 on pci0
pcib10: secondary bus 2
pcib10: subordinate bus 2
pcib10: I/O decode 0x0-0x0
pcib10: memory decode 0xfff00000-0xfffff
pcib10: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib10
pci2: physical bus=2
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 10 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 7 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc080-0xc09f irq 5 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfcfffc00-0xfcffffff irq 15 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfcfffc00
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib11: <PCI-PCI bridge> at device 30.0 on pci0
pcib11: secondary bus 1
pcib11: subordinate bus 1
pcib11: I/O decode 0xd000-0xdfff
pcib11: memory decode 0xfd000000-0xfe7fffff
pcib11: prefetched decode 0xfff00000-0xfffff
pcib11: Subtractively decoded bridge.
pci1: <PCI bus> on pcib11
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=12, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib11: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib11: (null) requested I/O range 0xd800-0xd8ff: in range
map[18]: type 1, range 32, base fe7ff000, size 12, enabled
pcib11: (null) requested memory range 0xfe7ff000-0xfe7fffff: good
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 5 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880
ata2: reset tp1 mask=01 ostat0=80 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480
ata3: reset tp1 mask=01 ostat0=7f ostat1=00
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=00 devices=0x0
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: ic_type 90 part_id 73
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x21 0x29 0x21 0x21
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
procfs registered
linprocfs registered
Timecounter "TSC" frequency 2793016779 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff805f53f0, 0) error 6
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH5 chip
acd0: setting UDMA33 on ICH5 chip
acd0: <SONY DVD-ROM DDU1613/9YS2> DVDROM drive at ata0 as master
acd0: read 6890KB/s (6890KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 190782MB <Seagate ST3200826AS 3.03> at ata2-master SATA150
ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
Waiting 5 seconds for SCSI devices to settle
GEOM: new disk ad4
pass0 at arcmsr0 bus 0 target 0 lun 0
pass0: <Areca ARC-1230-VOL#00 R001> Fixed Direct Access SCSI-3 device
pass0: Serial Number 0000002383003573
pass0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled
pass1 at arcmsr1 bus 0 target 0 lun 0
pass1: <Areca ARC-1230-VOL#00 R001> Fixed Direct Access SCSI-3 device
pass1: Serial Number 0000001687965638
pass1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled
da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1230-VOL#00 R001> Fixed Direct Access SCSI-3 device
da0: Serial Number 0000002383003573
da0: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled
da0: 2288817MB (4687497216 512 byte sectors: 255H 63S/T 291783C)
da1 at arcmsr1 bus 0 target 0 lun 0
da1: <Areca ARC-1230-VOL#00 R001> Fixed Direct Access SCSI-3 device
da1: Serial Number 0000001687965638
da1: 166.666MB/s transfers (83.333MHz, offset 32, 16bit), Tagged Queueing Enabled
da1: 4197091MB (8595642880 512 byte sectors: 255H 63S/T 535054C)
GEOM: new disk da0
GEOM: new disk da1
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
and sysctl output of hw.acpi
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.cpu.cx_supported: C1/0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00%
Acpi byte code could be found at
ftp://netserv3.chg.ru/acpi-debug/may-se7520af2.asl.
P.S. Linux seems to work fine with this mboard, but we would like to use
FreeBSD.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060406113433.O6088>