Date: Tue, 01 Aug 2006 21:22:18 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-mobile@freebsd.org Subject: Acer Aspire AS5672 laptop and FreeBSD 7.0-current (July snapshot) Message-ID: <20060801212218.e0c9f1c7.torfinn.ingolfsen@broadpark.no>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--Boundary_(ID_+uSUWoXMhMdxWtkx1pmDMA)
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7BIT
Hello,
I'm still trying to get this laptop working at a reasonable level with
FreeBSD. For my experiences with FreeBSD 6.1-stable, see earlier posts
on this mailing list.
My main goal is to make the wireless in this laptop work. Since it was
reported on this list that the experimental Interl PRO/Wireless 3945
driver works with -current, I tried installing the July snapshot of
-current (7.0-CURRENT-200607-i386-disc1.iso) on the machine. The
install went well, and the dmesg output (attached) indicates that it
has the same problems as under 6.1, so I tried the recipe I use there,
namely
hint.acpi.0.disabled="1"
hw.pci4.0.INTA.irq="18"
in /boot/loader.conf (or typed at the boot loader prompt).
I ecen tried with just the 'hint.acpi.0.disabled=1' line; but it
doesn't make a difference.
The machine hangs solid (or stops in boot) when acpi is disabled. Here
are the last lines of a vebose boot, transcribed from the screen:
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xe0000-0xe17ff pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xdf800-0xdffff pnpid PNP0c02 on isa0
unknown: <INT0800> can't assign resources (memory)
unknown: <INT0800> pnpid INT0800 on isa0
I don't *know* that the above lines have anything to do with the hang;
I only suspect that. But when the machine doesn't boot I do not know
how to debug this problem further.
Any hints appreciated.
--
Regards,
Torfinn Ingolfsen,
Norway
--Boundary_(ID_+uSUWoXMhMdxWtkx1pmDMA)
Content-type: text/plain; name=kg-home-dmesg-7.0-current-20060707.txt
Content-transfer-encoding: 7BIT
Content-disposition: attachment;
filename=kg-home-dmesg-7.0-current-20060707.txt
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT-200607 #0: Fri Jul 7 23:24:18 UTC 2006
root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,XTPR,<b15>>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 2145910784 (2046 MB)
avail memory = 2094755840 (1997 MB)
ACPI APIC Table: <INTEL CALISTGA>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497cd80 StartNode 0xc497cd80 ReturnNode 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
ugen0: <OEM Camera, class 255/255, rev 2.00/1.00, addr 2> on uhub4
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen1: <Broadcom Corp Acer Module, class 224/1, rev 2.00/1.00, addr 2> on uhub2
Timecounters tick every 1.000 msec
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s4a
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f200 StartNode 0xc497f200 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f100), AE_NOT_FOUND
--Boundary_(ID_+uSUWoXMhMdxWtkx1pmDMA)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060801212218.e0c9f1c7.torfinn.ingolfsen>