Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Oct 2006 17:37:07 +0900 (JST)
From:      Jacques Garrigue <garrigue@math.nagoya-u.ac.jp>
To:        nate@root.org
Cc:        freebsd-acpi@freebsd.org
Subject:   Re: Sony Vaio VGN-TX92S
Message-ID:  <20061010.173707.08072970.garrigue@math.nagoya-u.ac.jp>
In-Reply-To: <20061010.165404.74754637.garrigue@math.nagoya-u.ac.jp>
References:  <20061007.184902.07645150.garrigue@math.nagoya-u.ac.jp> <452B323B.6050908@root.org> <20061010.165404.74754637.garrigue@math.nagoya-u.ac.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
A few additions, as my previous post was incomplete.

> From: Nate Lawson <nate@root.org>
> > > The most usual one is that it doesn't resume after suspend: acpiconf
> > > -s3 does go to sleep, but it hangs on resume. I don't know if there is
> > > an easy solution, but I would take any hint.
> > 
> > This is a faq -- try disabling APIC:
> > hint.apic.0.disabled="1"
> 
> Thanks, that almost did the trick. If I also disable the hda sound
> driver, then I can suspend and resume.

Actually, I also needed "sysctl hw.acpi.reset_video=1" since the
default changed to 0.

> > > The more unusual one is that it gets rather hot. After a few minutes,
> > > the fan starts, and never stops. The temperature reading quickly goes
> > > to 58C, and stays there, but may go to 65C under load (the machine
> > Try without some device drivers loaded (wpi, hda, etc.)  See if that 
> > makes a difference.  Also, see the acpi man page for cpu idling, namely 
> > setting hw.acpi.cpu.cx_lowest=C3.
> 
> I tried this, with only C2, as C3 does not seem to be available for
> this cpu currently. (The Intel docs talk of a "very deep sleep" mode,
> so this may be lacking in the FreeBSD support.)

I was wrong. When I tried first the supported modes were only C1 and
C2, but using sysctl again later I found that C3 and even C4 were
available. I wonder why it changes while running. I tried with C4, but
I get no significant change in temperature.

Since the main problem is hang-up from overheat, is there any progress
in having powerd slow the CPU when the temperature is too high?

Jacques Garrigue





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061010.173707.08072970.garrigue>