Date: Sat, 20 Jan 2007 15:50:11 +0100 From: Hanno Krusken <lr101fc@yahoo.co.uk> To: freebsd-questions@freebsd.org Subject: Releng-6.2 upgrade HINT for iwi0 user !! Message-ID: <20070120155011.0841eb14.lr101fc@yahoo.co.uk>
next in thread | raw e-mail | index | archive | help
Hi all,
well this posting is send before, part of, the specific upgrade hint regarding the iwi0 driver !
now, FreeBSD-6.1-RELENG uses /usr/ports/net/iwi-firmware, but after the upgrade to FreeBSD-6.2-RELENG iwi0 will NOT work, you need to prefetch the port file /usr/ports/net/iwi-firmware-kmod !! you need to "make fetch" the distfile "ipw2200-fw-3.0.tgz" befor you "make buildworld" or you will not get your Wlan working if you relay on iwi0 to do your upgrades !!!
after fetching the "ipw2200-fw-3.0.tgz" file place it in /usr/ports/distfiles, rebuild the system to FreeBSD-6.2, install /usr/ports/net/iwi-firmware-kmod with kernel settings:
------------------------
# Wireless NIC cards
options BRIDGE
device if_bridge
device wlan # 802.11 support
device wlan_wep # WEP crypto
device wlan_ccmp
device wlan_tkip
device wlan_xauth
device wlan_acl
#device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device iwi # Intel/PRO 2915abg miniPCI
device firmware # Intel/PRO 2915abg miniPCI load Firmware
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
-------------------------
and you are done !!!
the port "/usr/ports/net/iwi-firmware" is no longer needed, and can be deleted !!
the rest of this posting is just a step by step way of doing the bulidworld upgrade....
specially for the novice of you, please read carefully !!
OK, this is a "the step-by-step GUIDE" to do a FreeBSD-RELENG-upgrade + BUILDWORLD process, using CVSUP
I have seen a lot of "buildworld" questions, and even more tips, on this news-group and now, finally I provide my "GUIDE" for all FreeBSD-RELENG-X.xx, builds, patches, ports-upgrades, in hope it will be help full for any one who still has problems building the system.......... to make a "BUILDWORLD" as fast, safe and easy as possible using the CVSUP way !
You will find your answer to most of your questions below.........
NOTE !!!
I only pull together and compress all the tips and information's out of news-groups, BSD-handbook, O'Reilly's publications and most my own try-and-error experiences. Even if it seams not quite perfect for some BSD-Gurus, but it happily dose the job for me, highly customised kernel and 564-installed-ports in one go, with out trouble.
I used this steps for years now on all FreeBSD-releng-4.8, 4.9, 4.10, 4.11, 5.4, 5.5, 6.0, 6.1, 6.2 and on all patch levels.
(well 4.x wont's it the old way, but 5.x and 6.x sweeps flawless ahead)
Recently upgraded my Laptop from FreeBSD-6.1-p12 to FreeBSD-6.2 with out any problems, even with gcc41 for the ports............ promised ;o)
Usually CVSUP the source, fetch the distfiles and e-mails in a pub with WiFi WLan down the road on my Laptop, have a beer or two, compile, build, install the rest on the way home and over night if needed.
No joke, I have no DSL, ISDN or phone at home but it works sweet for me,
beer taste better than a phone bill ;o) and keeps my system up-to-date as well.
Now to make it even more convenience to fetch it all, using "fastest_cvsup" for the source is a treat, but to keep it simple in this "guide" I'll only describe the basic way. (at the end of this mail you'll find a small script to CVSUP with "fatetest_cvsup") any way ;o)
Over all, a "buildworld" or "upgrade" with this guide will only work if your config files are OK before you carry on to follow this "guide": !!
Make sure the following files are looked over and work sweet !!!!
you'll run in to a lot of error messages, if not crafted carefully to suit your machine!!
you have to tweak this files first, to match your system, before you even can think about calling a buildworld-step out of this guide !!!
build a customs kernel first and you get in to it.
If your machine boots up with your own kernel, give it a go........
/etc/make.conf
/usr/src/sys/i386/conf/YOUR-KERNEL-FILE
/etc/standard-supfile
/etc/ports-supfile
### STEP-BY-STEP the stupid way, but easy as that "1+2=3a" or "1+2=3b" ............ ;o)
###
### 1.) FETCHING SRC-SOURCE BY CVSUP, CLEANING SYSTEM AND RUNNING BUILDWORLD !!
### 2.) BOOT UP IN SINGLE MODE, MERGEMASTER AND INSTALLWORLD !!
### 3-a.) use for: RELEASE-PATCH-UPGRADE + DAILY-PORTS-UPGRADE AND FINISH !!
### 3-b.) or use for: FULL-RELEASE-UPGRADE + FULL-PORTS-UPGRADE AND FINISH !!
###
### BUILDWORLD PROCESS WITH CVSUP:
### "guide" for system upgrade:
### all action as "root" or "su" to root ;o)
###----------------------
### 1.) FETCHING SRC SOURCE BY CVSUP, CLEANING SYSTEM AND RUNNING BUILDWORLD:
# cvsup -g -L 2 /etc/standard-supfile ### (you need to be online for this one to fetch the "source")
# cd /usr/obj
# chflags -R noschg *
# rm -rf *
# cd /usr/src
# make cleanworld
# make buildworld
# make buildkernel KERNCONF=YOUR-KERNEL-FILE
# make installkernel KERNCONF=YOUR-KERNEL-FILE
# reboot
###----------------------
### 2.) BOOT UP IN SINGLE MODE, MERGEMASTER AND INSTALLWORLD !!!
# hit the <space-key> if boot up delay counter starts !!
# boot -s
# fsck -p
# mount -u /
# mount -a
# cd /usr/src
# adjkerntz -i
# cd /usr/src
# mergemaster -p ### pre-buildworld mode, only essential files !
# make installworld
# make delete-old
# cp -Rp /etc /etc.old
# mergemaster -cv ### do all changes as needed, take your time and think, redo every step if unsure !!! ... or you can hack the files by hand ....
# reboot
###-----------------------
### 3-a.) use FOR RELEASE-PATCH-UPGRADE, DAILY-PORTS-UPGRADE AND FINISH !!
### BOOT UP IN NORMAL MODE, PORTS UPGRADE AND FINISH !!!
### open a "xterm" if running in X11
# su
# Password:
# uname -a
# cd /usr/src
# make delete-old-libs
# make clean
# cvsup -g -L 2 /etc/ports-supfile ### (you need to be online for this one to fetch the "ports collection")
# cd /usr/ports
# make fetchindex ### (or "make index" but takes time)
# portupgrade -rRaF ### (you need to be online for this one to fetch the "distfiles" SKIP THIS STEP IF PERMANENT ONLINE)
# portupgrade -rRa ### (you can go offline for this one now)
### RESTART X11 and/or boot !!! FINISHED :o)
###-----------------------
### 3-b.) FOR FULL-RELEASE-UPGRADE, AND FULL-PORTS-UPGRADE AND FINISH !!!
### (AFTER RELEASE UPGRADE) -> after FreeBSD upgrade from 5.4 to 5.x, 6.x or newer !!
# cvsup -g -L 2 /etc/ports-supfile ### (you need to be online for this one to fetch the "ports collection")
# cd /usr/ports
# make fetchindex ### (or "make index" but takes time)
# portupgrade -rRafF ### (you need to be online for this one to fetch the "distfiles" SKIP THIS STEP IF PERMANENT ONLINE)
# portupgrade -afk ### (you can go offline for this one now)
# pkgdb -uf && cd /usr/ports/lang/pyton && make upgrade-side-packages
# pkgdb -F
# reboot
### FINISHED :o)
---------------------------------------------------
### my "/etc/cvsup-new" script called out of my X11 BlackBox-menu and for daily use:
---------------------------------------------------
[submenu] (CVS upgrade...) {}
[exec] (cvs-new) {sudo -S xterm -e /etc/cvs-new}
[exec] (cvs src) {sudo -S xterm -e cvsup /etc/standard-supfile}
[exec] (cvs ports) {sudo -S xterm -e cvsup /etc/ports-supfile}
[exec] (cvs doc) {sudo -S xterm -e cvsup /etc/doc-supfile}
[exec] (fetch portupgrade) {xterm -sb -pob -e sudo -S portupgrade -rRaF}
[exec] (portupgrade -rRa) {xterm -sb -pob -e sudo -S portupgrade -rRa}
[exec] (pkgdb -F) {xterm -sb -pob -e sudo -S pkgdb -F}
[end]
---"/etc/cvsup-new"-----------------------------
#!/bin/sh
if SERVER=`fastest_cvsup -q -c uk,dk,de`; then
cvsup -h $SERVER /etc/standard-supfile
fi
if SERVER=`fastest_cvsup -q -c uk,dk,de`; then
cvsup -h $SERVER /etc/ports-supfile
fi
----------------------------------------------------
good luck.... have fun......... ;o)
PS.
I'm not listening to "stupid destructive critics" ...... winching and carrying on playing with M$-WinVirus on there own !!! .........
But I'll be open for constructive tips, tweak this GUIDE to enrich the way of FreeBSD for every one !!! ......
thanks ;o)
XXX
Hanno Krusken
___________________________________________________________
Try the all-new Yahoo! Mail. "The New Version is radically easier to use" – The Wall Street Journal
http://uk.docs.yahoo.com/nowyoucan.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070120155011.0841eb14.lr101fc>