Date: Sat, 07 Apr 2007 19:48:36 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-multimedia@freebsd.org Subject: pvr-350 not working - how to debug? Message-ID: <20070407194836.d725b2f3.torfinn.ingolfsen@broadpark.no>
next in thread | raw e-mail | index | archive | help
Hello, I have a pvr-350 in a desktop machine, and today i decided to upgrade the machine to the latest stable: tingo@kg-quiet$ uname -a FreeBSD kg-quiet.kg4.no 6.2-STABLE FreeBSD 6.2-STABLE #17: Sat Apr 7 18:45:15 CEST 2007 root@kg-quiet.kg4.no:/usr/obj/usr/src/sys/QUIET amd64 and try out the new driver from usleep: http://usleepless.110mb.com/pvrxxx_port-01042007.tgz After getting the patch file for iicbb off this list, I made a new kernel, rebooted and installed the driver. The card is detected fine: Apr 7 18:58:18 kg-quiet kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at d evice 0.0 on pci2 Apr 7 18:58:18 kg-quiet kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Apr 7 18:58:18 kg-quiet kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Apr 7 18:58:18 kg-quiet kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Apr 7 18:58:18 kg-quiet kernel: cxm0: Philips FM1216ME MK3 tuner Apr 7 18:58:18 kg-quiet kernel: cxm0: SAA7115 rev 1 video decoder Apr 7 18:58:18 kg-quiet kernel: cxm0: MSP4418G-B3 audio decoder Apr 7 18:58:18 kg-quiet kernel: cxm0: IR Remote Apr 7 18:58:18 kg-quiet kernel: cxm0: [FAST] Apr 7 18:58:18 kg-quiet kernel: cxm0: encoder firmware version 0x2060039 Apr 7 18:58:18 kg-quiet kernel: cxm0: decoder firmware version 0x2020023 However, when I try to use setchannel to set a frequency, like this: pvr250-setchannel -m 4 196.25 I get these errors in /var/log/messages: Apr 7 19:01:28 kg-quiet kernel: cxm0: video decoder failed to lock Apr 7 19:01:29 kg-quiet kernel: cxm0: audio decoder failed to lock Apr 7 19:03:22 kg-quiet kernel: cxm0: video decoder isn't locked Apr 7 19:03:22 kg-quiet kernel: Could not detect FPS Apr 7 19:03:22 kg-quiet kernel: could not config dec Apr 7 19:03:22 kg-quiet kernel: could not start encoder Apr 7 19:04:36 kg-quiet kernel: cxm0: video decoder isn't locked Apr 7 19:04:36 kg-quiet kernel: Could not detect FPS Apr 7 19:04:36 kg-quiet kernel: could not config dec Apr 7 19:04:36 kg-quiet kernel: could not start encoder Apr 7 19:10:07 kg-quiet kernel: cxm0: video decoder isn't locked For every frequency I try. I changed the cable, just to be on the safe side. No luck. I then decided to try the pvr250 port. It installs, the card is detected: Apr 7 19:31:21 kg-quiet kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem 0xf8000000-0xfbffffff irq 20 at d evice 0.0 on pci2 Apr 7 19:31:21 kg-quiet kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0 Apr 7 19:31:21 kg-quiet kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0 Apr 7 19:31:21 kg-quiet kernel: iicbus0: <Philips I2C bus> on iicbb0 master-only Apr 7 19:31:21 kg-quiet kernel: cxm0: Philips FM1216ME MK3 tuner Apr 7 19:31:21 kg-quiet kernel: cxm0: SAA7115 rev 1 video decoder Apr 7 19:31:21 kg-quiet kernel: cxm0: MSP4418G-B3 audio decoder Apr 7 19:31:21 kg-quiet kernel: cxm0: IR Remote Apr 7 19:31:21 kg-quiet kernel: cxm0: [GIANT-LOCKED] Apr 7 19:31:21 kg-quiet kernel: cxm0: encoder firmware version 0x2050032 Apr 7 19:31:21 kg-quiet kernel: cxm0: decoder firmware version 0x2020023 But I still get the same problem when I try to set a channel using pvr250-setchannel: Apr 7 19:31:48 kg-quiet kernel: cxm0: video decoder failed to lock Apr 7 19:32:07 kg-quiet kernel: cxm0: video decoder isn't locked Apr 7 19:32:16 kg-quiet kernel: cxm0: video decoder failed to lock Apr 7 19:32:32 kg-quiet last message repeated 2 times Apr 7 19:32:37 kg-quiet kernel: cxm0: video decoder isn't locked Apr 7 19:33:07 kg-quiet kernel: cxm0: video decoder failed to lock Apr 7 19:33:10 kg-quiet kernel: cxm0: video decoder isn't locked Apr 7 19:34:02 kg-quiet kernel: cxm0: video decoder failed to lock Apr 7 19:34:02 kg-quiet kernel: cxm0: audio decoder failed to lock Luckily, my main mythbackend (which have the pvr-500) is still working. Any hints on what I can do more to find the problem? -- Regards, Torfinn Ingolfsen, Norway
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070407194836.d725b2f3.torfinn.ingolfsen>