Date: Wed, 13 Jun 2007 22:23:21 +0300 From: Mikael Ikivesi <mikael.ikivesi@pp.inet.fi> To: freebsd-acpi@freebsd.org Subject: CURRENT-regression? Message-ID: <200706132223.21437.mikael.ikivesi@pp.inet.fi>
next in thread | raw e-mail | index | archive | help
Just installed CURRENT snapshot from: ftp://ftp.se.freebsd.org/pub/FreeBSD/snapshots/200706 I cannot boot it with acpi turned off. It fails when trying to mount root. When I boot with acpi I get lots of error messages about no hardware response (in ec, thermal and battery). FreeBSD 6.2 can boot when acpi off. acpi on there is errors also. I dont know if this is caused by changes in acpi stuff or in other parts of kernel. So i dont know if this post should be sent to freebsd-current and not here. And even thou acpi warns about thermal being non responsive sysctl shows correctly my system temperature: #sysctl -a|grep thermal hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 40.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 85.0C hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 98.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 42.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 83.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 Does anyone know if my system will fail to cool under load? More on errors and my system information can be seen from dmesg below. It is with unmodified DSDT. I tried also modified after fixing most errors in it. I did not understand what _WED should return so it was only one that remained....(reading acpi specification documents now) Changing ec poll delay did not do anything, but debug.acpi.disabled=ec strips some errors and error will stop to annoy me after system gives up trying to read battery. -mikael ikivesi --------------------------------------dmesg: Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT-200706 #0: Thu Jun 7 21:38:42 UTC 2007 root@stiles.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile AMD Athlon(tm) 64 Processor 3700+ (800.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x1<LAHF> usable memory = 925507584 (882 MB) avail memory = 891461632 (850 MB) ACPI APIC Table: <PTLTD APIC > ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, 1000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1 ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 5.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0208000-0xc02080ff irq 23 at device 7.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0a:e4:ac:90:fa rl0: [ITHREAD] cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [ITHREAD] fwohci0: <1394 Open Host Controller Interface> mem 0xc0208800-0xc0208fff,0xc0200000-0xc0203fff irq 21 at device 9.2 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:0a:e4:05:36:10:38:51 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x35e6c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0a:e4:10:38:51 fwe0: Ethernet address: 02:0a:e4:10:38:51 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:0a:e4:05:36:10:38:51 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci2: <mass storage> at device 9.3 (no driver attached) pci0: <multimedia, audio> at device 20.5 (no driver attached) pci0: <simple comms, generic modem> at device 20.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 umass0: <vendor 0x0c76 product 0x0005, class 0/0, rev 1.10/1.00, addr 2> on uhub1 Timecounter "TSC" frequency 800009451 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) battery0: battery initialization start acpi_acad0: acline initialization start ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100 acd0: DVDR <HL-DT-ST DVD-RW GWA-4082N/CW02> at ata1-master UDMA33 GEOM_LABEL: Label for provider ad0s1 is ext2fs/root. GEOM_LABEL: Label for provider ad0s5 is ext2fs/tmp. GEOM_LABEL: Label for provider ad0s7 is reiserfs/home. GEOM_LABEL: Label for provider ad0s8 is ext2fs/taotao. GEOM_LABEL: Label for provider ad0s9 is ext2fs/portage. acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff0000e52500), AE_NO_HARDWARE_RESPONSE ACPI Error (uteval-0309): Method execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._STA] (Node 0xffffff0000e52500), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBST] (Node 0xffffff0000e52600), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BST] (Node 0xffffff0000e524c0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.ADP1._PSR] (Node 0xffffff0000e52440), AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_._Q3A] (Node 0xffffff0000e5e7c0), AE_NO_HARDWARE_RESPONSE acpi_ec0: evaluation of GPE query method _Q3A failed - AE_NO_HARDWARE_RESPONSE da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Easy Disk 1.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 31MB (64000 512 byte sectors: 64H 32S/T 31C) Trying to mount root from ufs:/dev/ad0s3a acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBST] (Node 0xffffff0000e52600), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BST] (Node 0xffffff0000e524c0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBST] (Node 0xffffff0000e52600), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BST] (Node 0xffffff0000e524c0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBST] (Node 0xffffff0000e52600), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BST] (Node 0xffffff0000e524c0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery status -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE acpi_acad0: On Line acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE acpi_acad0: acline initialization done, tried 2 times acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.GBIF] (Node 0xffffff0000e52620), AE_NO_HARDWARE_RESPONSE ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.LPC0.EC0_.BAT0._BIF] (Node 0xffffff0000e524e0), AE_NO_HARDWARE_RESPONSE battery0: error fetching current battery info -- AE_NO_HARDWARE_RESPONSE battery0: battery initialization failed, giving up acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE acpi_ec0: EcRead: Failed waiting for EC to send data. ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0000dbe720), AE_NO_HARDWARE_RESPONSE acpi_tz0: error fetching current temperature -- AE_NO_HARDWARE_RESPONSE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200706132223.21437.mikael.ikivesi>