Date: Sat, 8 Sep 2007 10:54:13 +0300 From: Mikael Ikivesi <mikael.ikivesi@pp.inet.fi> To: freebsd-acpi@freebsd.org Subject: Re: PATCH: ecng for 6.x and 7.x Message-ID: <200709081054.14073.mikael.ikivesi@pp.inet.fi> In-Reply-To: <46E0777A.8070901@root.org> References: <46E0777A.8070901@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 07 September 2007 00:56, Nate Lawson wrote:
> I've done some major rework on the EC driver. This should help with
> various problems, including timeouts while checking battery status or
> temperature.
And it does :) Thanks...
It took away those error messages I was having. Now things seems to work, more
or less...
dmesg still shows this:
acpi0: reservation of 0, 1000 (3) failed
but thats all.
When issuing halt -p the system powersoff but show some acpi related message
just before powering off but it goes so fast I dont have a clue about its
contents.
Note still: If I try to suspend machine I get kernel panic. I dont know if it
was you patch or some other update, but before I got only messages and bounce
back to system without crashing. Because of the updates I cannot now access
the messages but if I remember correctly they were something about:
device physically ejected? and they had something to do with cardbus if I
remember correctly...
...sorry for being so vague!
BUT about that panic I can be more precise :)
acpi_button0: sleep button pressed
Kernel page fault with the following non-sleepable locks held:
exclusive sleep mutex ACPI global lock r = 0 (0xffffffff808ac4a0) locked
@ /usr/src/sys/dev/acpica/acpi.c:2222
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
witness_warn() at witness_warn+0x248
trap() at trap+0x25e
calltrap() at calltrap+0x8
--- trap 0xc, rip = 0xffffffff801d9cf4, rsp = 0xffffffff9ed4aa00, rbp =
0xffffffff9ed4aa30 ---
acpi_AckSleepState() at acpi_AckSleepState+0x34
devfs_ioctl_f() at devfs_ioctl_f+0x6d
kern_ioctl() at kern_ioctl+0xa3
ioctl() at ioctl+0xf9
syscall() at syscall+0x1ce
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (54, FreeBSD ELF64, ioctl), rip = 0x8007187ec, rsp =
0x7fffffffecd8, rbp = 0x7fffffffee50 ---
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x8:0xffffffff801d9cf4
stack pointer = 0x10:0xffffffff9ed4aa00
frame pointer = 0x10:0xffffffff9ed4aa30
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 748 (acpiconf)
----AND---
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #3: Sat Sep 8 00:44:11 EEST 2007
root@:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a93000.
Calibrating clock(s) ... i8254 clock: 1193164 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 800009844 Hz
CPU: Mobile AMD Athlon(tm) 64 Processor 3700+ (800.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 926576640 (883 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x0000000000b90000 - 0x0000000036422fff, 898183168 bytes (219283 pages)
avail memory = 892522496 (851 MB)
ACPI APIC Table: <PTLTD APIC >
APIC: CPU 0 has ACPI ID 0
ACPI: RSDP @ 0x0xf7ee0/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x37eaa47e/0x0034 (v 1 PTLTD RSDT 0x06040000 LTP
0x00000000)
ACPI: FACP @ 0x0x37eaedbd/0x0074 (v 1 FUJ W37 0x06040000 W37
0x000F4240)
ACPI: DSDT @ 0x0x37eaa4b2/0x490B (v 1 FUJ W37 0x06040000 MSFT
0x0100000E)
ACPI: FACS @ 0x0x37eaffc0/0x0040
ACPI: SSDT @ 0x0x37eaee31/0x0139 (v 1 PTLTD POWERNOW 0x06040000 LTP
0x00000001)
ACPI: APIC @ 0x0x37eaef6a/0x005A (v 1 PTLTD APIC 0x06040000 LTP
0x00000000)
ACPI: MCFG @ 0x0x37eaefc4/0x003C (v 1 PTLTD MCFG 0x06040000 LTP
0x00000000)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a104
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002)
AcpiOsDerivePciId: \_SB_.PCI0.SATA.SATX -> bus 0 dev 18 func 0
AcpiOsDerivePciId: \_SB_.PCI0.SAT2.SATX -> bus 0 dev 17 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \_SB_.PCI0.IDE_.IDE_ -> bus 0 dev 20 func 1
AcpiOsDerivePciId: \_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
acpi0: reservation of 0, 1000 (3) failed
ACPI timer: 0/12 0/11 0/11 0/11 0/11 0/11 0/11 0/11 0/11 0/11 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1002, dev=0x5950, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a3f, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4374, revid=0x00
bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0000000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4375, revid=0x00
bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0001000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4373, revid=0x00
bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0002000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4372, revid=0x11
bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8400, size 4, enabled
map[14]: type Memory, range 32, base 0xc0003000, size 10, enabled
found-> vendor=0x1002, dev=0x4376, revid=0x00
bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
MSI supports 1 message
map[20]: type I/O Port, range 32, base 0x8410, size 4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4377, revid=0x00
bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4371, revid=0x00
bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4370, revid=0x02
bus=0, slot=20, func=5
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0003400, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4378, revid=0x02
bus=0, slot=20, func=6
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0003800, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xc8000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x5955, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xc8000000, size 27,
enabled
pcib1: requested memory range 0xc8000000-0xcfffffff: good
map[14]: type I/O Port, range 32, base 0x9000, size 8, enabled
pcib1: requested I/O range 0x9000-0x90ff: in range
map[18]: type Memory, range 32, base 0xc0100000, size 16, enabled
pcib1: requested memory range 0xc0100000-0xc010ffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem
0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1
ohci0: <ATI SB400 USB Controller> mem 0xc0000000-0xc0000fff irq 19 at device
19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0000000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xc0001000-0xc0001fff irq 19 at device
19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0001000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at
device 19.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0002000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8410
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xafff
pcib2: memory decode 0xc0200000-0xc02fffff
pcib2: no prefetched decode
pcib2: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=2, slot=5, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xc0204000, size 13, enabled
pcib2: requested memory range 0xc0204000-0xc0205fff: good
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 20
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xa000, size 8, enabled
pcib2: requested I/O range 0xa000-0xa0ff: in range
map[14]: type Memory, range 32, base 0xc0208000, size 8, enabled
pcib2: requested memory range 0xc0208000-0xc02080ff: good
pcib2: matched entry for 2.7.INTA
pcib2: slot 7 INTA hardwired to IRQ 23
found-> vendor=0x104c, dev=0x8031, revid=0x00
bus=2, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, enabled
found-> vendor=0x104c, dev=0x8032, revid=0x00
bus=2, slot=9, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0208800, size 11, enabled
pcib2: requested memory range 0xc0208800-0xc0208fff: good
map[14]: type Memory, range 32, base 0xc0200000, size 14, enabled
pcib2: requested memory range 0xc0200000-0xc0203fff: good
pcib2: matched entry for 2.9.INTC
pcib2: slot 9 INTC hardwired to IRQ 21
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=2, slot=9, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0206000, size 13, enabled
pcib2: requested memory range 0xc0206000-0xc0207fff: good
pcib2: matched entry for 2.9.INTA
pcib2: slot 9 INTA hardwired to IRQ 20
pci2: <network> at device 5.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
pcib2: re0 requested I/O range 0xa000-0xa0ff: in range
pcib2: rl0 requested I/O range 0xa000-0xa0ff: in range
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xc0208000-0xc02080ff
irq 23 at device 7.0 on pci2
pcib2: rl0 requested I/O range 0xa000-0xa0ff: in range
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0a:e4:ac:90:fa
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
rl0: [MPSAFE]
rl0: [ITHREAD]
cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on pci2
pcib2: cbb0 requested memory range 0xc0200000-0xc02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xc0209000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.9.INTA
pcib2: slot 9 INTA hardwired to IRQ 20
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
cbb0: [MPSAFE]
cbb0: [ITHREAD]
cbb0: PCI Configuration space:
0x00: 0x8031104c 0x02100007 0x06070000 0x00824010
0x10: 0xc0209000 0x020000a0 0x20040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400114
0x40: 0x10921734 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844d061 0x00000000 0x001f0000 0x010a1b22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <serial bus, FireWire> at device 9.2 (no driver attached)
pci2: <mass storage> at device 9.3 (no driver attached)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 55
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 100001242 hz
Timecounter "TSC" frequency 800009844 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
acpi_acad0: acline initialization start
ad0: setting PIO4 on IXP400 chip
ad0: setting UDMA100 on IXP400 chip
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Silicon Image check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on IXP400 chip
acd0: setting UDMA33 on IXP400 chip
acd0: <HL-DT-ST DVD-RW GWA-4082N/CW02> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM_LABEL: Label for provider ad0s1 is ext2fs/root.
battery0: battery initialization done, tried 1 times
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
GEOM_LABEL: Label for provider ad0s5 is ext2fs/tmp.
GEOM_LABEL: Label for provider ad0s7 is reiserfs/home.
GEOM_LABEL: Label for provider ad0s8 is ext2fs/taotao.
GEOM_LABEL: Label for provider ad0s9 is ext2fs/portage.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0?
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVD-RW GWA-4082N CW02> RemovGEOM: new disk cd0
able CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
ATA PseudoRAID loaded
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVD-RW GWA-4082N CW02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: WITNESS option enabled, expect reduced performance.
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
<118>Loading configuration files.
<118>kernel dumps on /dev/ad0s3b
<118>Entropy harvesting:
<118> interrupts
<118> ethernet
<118> point_to_point
<118> kickstart
<118>.
<118>swapon: adding /dev/ad0s3b as swap device
<118>Starting file system checks:
<118>/dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad0s3a: clean, 67767 free (935 frags, 8354 blocks, 0.4%
fragmentation)
<118>/dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad0s3e: clean, 253782 free (38 frags, 31718 blocks, 0.0%
fragmentation)
<118>/dev/ad0s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad0s3f: clean, 4482975 free (59103 frags, 552984 blocks, 1.0%
fragmentation)
<118>/dev/ad0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ad0s3d: clean, 908024 free (144 frags, 113485 blocks, 0.0%
fragmentation)
<118>Setting hostuuid: 962fc960-322a-11da-b7f3-aa7b8b2b72d7.
<118>Setting hostid: 0x584b66d1.
<118>Mounting local file systems:
<118>.
<118>/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
<118>net.inet6.ip6.auto_linklocal:
<118>1
<118> ->
<118>0
<118>
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
<118> inet6 ::1 prefixlen 128
<118> inet 127.0.0.1 netmask 0xff000000
<118>Additional routing options:
<118>.
<118>Starting devd.
<118>hw.acpi.cpu.cx_lowest:
<118>C1
<118> ->
<118>C1
<118>
<118>Additional IP options:
<118>.
<118>Mounting NFS file systems:
<118>.
<118>Creating and/or trimming log files:
<118>.
<118>Starting syslogd.
<118>Checking for core dump on /dev/ad0s3b...
<118>savecore: no dumps found
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Initial amd64 initialization:
<118>.
<118>Additional ABI support:
<118>.
<118>Starting named.
<118>Clearing /tmp (X related).
<118>Starting local daemons:
<118>.
<118>Updating motd
<118>.
<118>Mounting late file systems:
<118>.
<118>Configuring syscons:
<118> keymap
<118> blanktime
<118>.
<118>Starting cron.
<118>Local package initialization:
<118>.
<118>Starting default moused:
<118>.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sat Sep 8 10:03:15 EEST 2007
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200709081054.14073.mikael.ikivesi>