Date: Mon, 12 Nov 2007 20:54:01 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: =?euc-kr?B?+dvKq/j2?= Bill Hacker <askbill@conducive.net> Cc: freebsd-current@freebsd.org Subject: Re: nfe internet problems Message-ID: <20071112115401.GF87383@cdnetworks.co.kr> In-Reply-To: <47383211.7040702@conducive.net> References: <47375D78.4040309@chuckr.org> <20071112005620.GA87383@cdnetworks.co.kr> <4737BCC3.5030509@chuckr.org> <20071112044340.GC87383@cdnetworks.co.kr> <4737F8BD.40304@conducive.net> <20071112103118.GE87383@cdnetworks.co.kr> <47383211.7040702@conducive.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Nov 12, 2007 at 10:59:29AM +0000, ùÛÊ«øö Bill Hacker wrote: > Pyun YongHyeon wrote: > > *trimmed* > > > >Show me the "pciconf -lcv" output. > > If it is of any use, here 'tis - BIOS has the onboard Gig-E chip AND its > BIOS extension 'enabled' and there is a CAT5e attached to a Gig-E hub with > DHCP available. > > External components work cleanly with other gear attached, to wit PowerBook > 17" with Gig-E, other MB with Intel or Realtek Gig-E. > > > ======= 8-CURRENT 17 OCT Asus P5K ================= > [...] > none1@pci0:2:0:0: class=0x020000 card=0x82261043 chip=0x10481969 > rev=0xb0 hdr=0x00 > class = network > subclass = ethernet > cap 01[40] = powerspec 2 supports D0 D3 current D0 > cap 05[48] = MSI supports 1 message, 64 bit > cap 10[58] = PCI-Express 1 endpoint Hmm, it's Attansic L1 gigabit ethernet controller. ATM as you said there is no FreeBSD driver for the controller but I think Kevin Lo(kelvo@) is working on age(4) to support the ethernet controller. I'm not sure whether age(4) also supports Attansic F1 ethernet controller. I also heard ndis(4) works OK for the ethernet. Long time ago when I asked for datasheet for the controller the vendor simply rejected it so I gave up. AFAIK the vendor released Linux driver under GPL so it's doable to write a driver but it would be time-consuming and tedious work. :-( [...] > > Should be the same for 7-(any) AFAIK. > > The nVidia and the RTL8139 are on PCI-e and PCI of course. > > Manual & BIOS report the onboard GigE is an Attansic - not currently > supported AFAIK. > > Nor do I care. Cheaper to switch MB or add cards unless this chipset > becomes more common. > > The OP's nVidia is more important. -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071112115401.GF87383>