Date: Thu, 21 Feb 2008 17:11:06 +0000 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: Kemian Dang <dangkm@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: port net/acx100 for usr5410 pcmcia wireless FBSD 6.3 Message-ID: <20080221171106.GA3062@mech-aslap33.men.bris.ac.uk> In-Reply-To: <82f916c90802200839j3580ca15i7ab59bedbd17f1d@mail.gmail.com> References: <20080201111805.GA7580@mech-aslap33.men.bris.ac.uk> <20080219142254.GA77217@mech-aslap33.men.bris.ac.uk> <82f916c90802200421n2b22229alc9e40f64373c4b45@mail.gmail.com> <20080220154901.GA1674@mech-aslap33.men.bris.ac.uk> <82f916c90802200839j3580ca15i7ab59bedbd17f1d@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> > > > On 19/02/2008, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > > > > Is anybody using usr5410? With what driver? And what version of FBSD? > > > > > > > On Wed, Feb 20, 2008 at 12:21:22PM +0000, Kemian Dang wrote: > > > Try ndis, it works for my broadcom wireless adapter. > > > > On 20/02/2008, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > > I added ndis to the kernel and built the kernel module using > > http://www.linuxant.com/usr11gv40q.zip driver. > > > > However, when I load the module: > > I get errors. From dmesg: > > > > cardbus1: Expecting link target, got 0xed > > cardbus1: Resource not specified in CIS: id=10, size=2000 > > cardbus1: Resource not specified in CIS: id=14, size=20000 > > ndis0: <U.S. Robotics 802.11g Wireless Turbo Adapter> mem 0x88020000-0x88021fff,0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus1 > > ndis0: NDIS API version: 5.1 > > ndis0: init handler failed > > device_attach: ndis0 attach returned 6 > > > > What am I doing wrong? > > On Wed, Feb 20, 2008 at 04:39:22PM +0000, Kemian Dang wrote: > Try add it to the /boot/loader.conf and restart to see whether it works. > My ndis0 can not get response from "ifconfig ndis0 scan", but I can > give it the ssid manually and make it work. thanks, it seems to be detected now, from dmesg: cardbus1: Expecting link target, got 0xfd cardbus1: Resource not specified in CIS: id=10, size=2000 cardbus1: Resource not specified in CIS: id=14, size=20000 ndis0: <U.S. Robotics 802.11g Wireless Turbo Adapter> mem 0x88020000-0x88021fff, 0x88000000-0x8801ffff irq 11 at device 0.0 on cardbus1 ndis0: NDIS API version: 5.1 ndis0: Ethernet address: 00:c0:49:a9:22:59 I still cannot connect to the wireless network, but this is probably another problem.. # ifconfig ndis0 up scan SSID BSSID CHAN RATE S:N INT CAPS UoB-Wireless 00:16:c7:71:9d:63 1 52M 18:0 100 E # # tail /etc/rc.conf ifconfig_ndis0="DHCP" # /etc/rc.d/netif start ndis0: no link .............. giving up ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:c0:49:a9:22:59 media: IEEE 802.11 Wireless Ethernet autoselect status: no carrier ssid "" channel 1 authmode OPEN privacy OFF txpowmax 100 bmiss 7 # I also tried # ifconfig ndis0 ssid UoB-Wireless but that didn't help. I'll try to update the driver version from 4.0q to 6.0b15, but the latter is not working fine yet. I think it is because I mixed different versions of inf, sys and firmware. many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 928 8233 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080221171106.GA3062>