Date: Wed, 26 Mar 2008 18:47:12 +0100 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-mobile@freebsd.org Subject: Re: if_wpi will not work for me Message-ID: <20080326184712.50100aac.torfinn.ingolfsen@broadpark.no> In-Reply-To: <200803261002.m2QA2VNZ036148@tausa.cc.uit.no> References: <200803181157.m2IBvBLb000594@tausa.cc.uit.no> <200803261002.m2QA2VNZ036148@tausa.cc.uit.no>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 26 Mar 2008 11:02:31 +0100 Johan Johansen <Johan.Johansen@cc.uit.no> wrote: > Returning from my vacation, I notice that my problem is somewhat > different from what some of you other guys describe. I cant get a > wpi-device to work with at all. > > Booting without acpi makes no differens. > Applying patch wpi_releng7.diff makes no differens. > > Before I load if_wpi, pciconf says > none0@pci0:8:0:0: class=0x028000 card=0x135c103c > chip=0x42228086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '10418086 Intel 3945ABG Wireless LAN controller' > class = network > and after > wpi0@pci0:8:0:0: class=0x028000 card=0x135c103c > chip=0x42228086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '10418086 Intel 3945ABG Wireless LAN controller' > class = network > but still no wpi0 present. > > So, would it help to buy more memory, and if I do, where should I put > it? Just curious: why do you think that buying more memory will help? Because of the "cabn't allocate memory resource" message? AFAIU, that message indicates that there is something wrong with the way your acpi / bios tells FreeBSD what memory / how much memory it needs, not that the machine itself has too little memory. What is needed to find out more is the dmesg output from a verbose boot, preferably put up on the web somewhere, and with a link to it in your message here. Also, be sure to put up the complete dmesg output. For good mesasure, include the complete dmesg output of a normal boot as well, and 'pciconf -lv' output, and what more? You didn't say if your laptop is dual booting. If it is, and if the wpi network adapter is working in some other os, it will help if you can find out what resources (irq, memory ranges, etc) it uses in that other os. HTH -- Regards, Torfinn Ingolfsen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080326184712.50100aac.torfinn.ingolfsen>