Date: Wed, 26 Mar 2008 22:15:14 -0400 From: Isaac Mushinsky <itz@mushinsky.net> To: freebsd-questions@freebsd.org Subject: Re: hplip setup problems Message-ID: <200803262215.14727.itz@mushinsky.net> In-Reply-To: <200803260021.12249.itz@mushinsky.net> References: <200803260021.12249.itz@mushinsky.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 26 March 2008 00:21:12 Isaac Mushinsky wrote: > I am close to assasinating my HP Photosmart C4280 in frustration. > > 1. This is an all-in-one device. (I did not try the scanner setup yet) > 2. ulpt, umass, uscanner modules are not in kernel and not kld-loaded. > 3. Machine is FreeBSD 7-stable/amd64. > 4. hplip is 2.8.2 > > $ usbdevs > addr 1: UHCI root hub, Intel > addr 1: UHCI root hub, Intel > addr 1: UHCI root hub, Intel > addr 1: EHCI root hub, Intel > addr 2: Photosmart C4200 series, HP > addr 1: UHCI root hub, Intel > addr 1: UHCI root hub, Intel > addr 1: UHCI root hub, Intel > addr 1: EHCI root hub, Intel > > There is a ppd file for these series with the hplip distribution. > > hpssd, cups started in the order needed. hp-setup detects the printer, and > then says 'Unable to create queue'. CUPS web interface actually adds the > printer, but then cannot print test page to it. cups user runs hpssd (I > tried root too). > > /var/log/messages has: > Mar 25 23:57:56 omsk python: io/hpmud/musb.c 135: unable > get_string_descriptor -5: Input/output error Mar 25 23:57:56 omsk python: > io/hpmud/musb.c 1951: invalid serial id string ret=-5 > > Here is all relevant output: > http://omsk.mushinsky.net/hplip-trouble > > Any help is appreciated. Thanks. > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" final piece of information: sane cannot open the HP all-in-one as a scanner with same error (getting serial id). However, my Nikon LS40-ED (a 35mm film scanner) works fine. So the problem is apparently not my installation or libusb. ~> sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b0 [Nikon], product=0x4000 [LS-40 ED]) at libusb:/dev/usb2:/dev/ugen1 found USB scanner (vendor=0x03f0 [HP], product=0x5c11 [Photosmart C4200 series]) at libusb:/dev/usb3:/dev/ugen0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. The Nikon scanner works, the HP device fails to return serial id as above.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200803262215.14727.itz>