Date: Sat, 7 Jun 2008 11:38:13 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Christian Brueffer <brueffer@FreeBSD.org> Cc: freebsd-hardware@FreeBSD.org, yongari@FreeBSD.org, Aymeric MUNTZ <aymeric.muntz@free.fr> Subject: Re: ATHEROS AR8012 10/100 Mbps PHY Message-ID: <20080607023813.GB4565@cdnetworks.co.kr> In-Reply-To: <20080606065050.GA1429@haakonia.hitnet.RWTH-Aachen.DE> References: <001901c8c72e$47714dd0$0101a8c0@artemis> <20080606065050.GA1429@haakonia.hitnet.RWTH-Aachen.DE>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jun 06, 2008 at 08:50:51AM +0200, Christian Brueffer wrote: > On Thu, Jun 05, 2008 at 07:04:55PM +0200, Aymeric MUNTZ wrote: > > Hi guys, > > > > > > > > I got a FBSD 5.4 box which I have to change the motherboard. > > > > It seams that it doesn't recognize the ATHEROS AR8012 10/100 Mbps PHY age(4) supports L1 Gigabit ethernet. It seems that your hardware might be Attansic/Atheros L2 fast ethernet which is not yet supported by FreeBSD. Supporting L2 wouldn't be hard as both OpenBSD/NetBSD already have a driver, lii(4). I don't have a L2 hardware so porting/writing a L2 driver is beyond scope of my ability. As Christian Brueffer said, knowing the output of pciconf -lvc would be big help to identify which hardware you've got. > > > > > > > > Anyone has any information about that? > > > > Hi Aymeric, > > the FreeBSD release you're using is very old, so there's no driver > support for your chip. In fact the driver that's likely to support > it (age(4)) is only in CURRENT at the moment but will probably be merged > to the STABLE branches soon. > Could you provide the output of pciconf -lv so we can determine if your > chip is supported by the age(4) driver? > > I have CCed Pyun YongHyeon, the age(4) driver writer, for additional insight. > > - Christian > > -- > Christian Brueffer chris@unixpages.org brueffer@FreeBSD.org > GPG Key: http://people.freebsd.org/~brueffer/brueffer.key.asc > GPG Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D -- Regards, Pyun YongHyeon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080607023813.GB4565>