Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 3 Oct 2008 03:58:28 -0700
From:      Jeremy Chadwick <koitsu@FreeBSD.org>
To:        Pyun YongHyeon <pyunyh@gmail.com>
Cc:        Giuseppe Pagnoni <gpagnoni@gmail.com>, freebsd-hardware@FreeBSD.org
Subject:   Re: LG combo drive and Attansic Technology ethernet card on Asus P5Q Pro
Message-ID:  <20081003105828.GA27057@icarus.home.lan>
In-Reply-To: <20081003082257.GC71518@cdnetworks.co.kr>
References:  <92056ebc0810020932w680c593er585dd865ef8af538@mail.gmail.com> <20081002231848.GA13467@icarus.home.lan> <20081003082257.GC71518@cdnetworks.co.kr>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Oct 03, 2008 at 05:22:57PM +0900, Pyun YongHyeon wrote:
> On Thu, Oct 02, 2008 at 04:18:48PM -0700, Jeremy Chadwick wrote:
>  > On Thu, Oct 02, 2008 at 06:32:20PM +0200, Giuseppe Pagnoni wrote:
> 
> [...]
> 
>  > 
>  > > On an unrelated topic, does anybody know whether the network card
>  > > Attansic Technology on Asus P5Q Pro motherboard is compatible with
>  > > FreeBSD?
>  > 
>  > Asus was somewhat vague as to what model of Attansic/Atheros IC they
>  > used on the P5Q series.  I have one of these boards, so I can assure
>  > you it's an Attansic L1E.  It's sometimes referred to as an Atheros
>  > AR8121, AR8113, or AR8114.
>  > 
>  > FreeBSD 7.1-PRERELEASE has support for this NIC; age(4) is the driver.
>  > 7.0 will very likely not support this NIC.
>  > 
> 
> If the controller is AR8121/AR8113 PCI-E adapters(also known as 
> L1E) there is no working driver for FreeBSD. Because the controller
> is quite different from its predecessor L1, new driver should be
> written for the controller.
> It's not feasible for me to write the driver until I can actually
> access the hardware. :-(

Wow, I was under the impression the L1 and the L1E were identical,
except that the L1E was PCI Express-based vs. PCI-based.

The Attansic L1E stuff is becoming more and more common here on
motherboards in the States.

Yong-Hyeon, I can get you a P5Q SE motherboard and send it your way
(with CPU + memory as well, if need be), if you'd like.

-- 
| Jeremy Chadwick                                jdc at parodius.com |
| Parodius Networking                       http://www.parodius.com/ |
| UNIX Systems Administrator                  Mountain View, CA, USA |
| Making life hard for others since 1977.              PGP: 4BD6C0CB |




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081003105828.GA27057>