Date: Wed, 15 Oct 2008 04:10:26 -0700 From: Jeremy Chadwick <koitsu@FreeBSD.org> To: Da Rock <rock_on_the_web@comcen.com.au> Cc: freebsd-questions@freebsd.org Subject: Re: How to get my Dad's Win2k system to access internet through my FreeBSD 6.2 system Message-ID: <20081015111026.GA75598@icarus.home.lan> In-Reply-To: <1224067248.3458.34.camel@laptop1.herveybayaustralia.com.au> References: <48F43EB1.40304@gmail.com> <gd1mi1$5tl$1@ger.gmane.org> <20081014101733.GA47158@icarus.home.lan> <gd1t24$q3s$1@ger.gmane.org> <1224067248.3458.34.camel@laptop1.herveybayaustralia.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 15, 2008 at 08:40:48PM +1000, Da Rock wrote: > > On Tue, 2008-10-14 at 06:46 -0400, Michael Powell wrote: > > Jeremy Chadwick wrote: > > > > > On Tue, Oct 14, 2008 at 04:55:11AM -0400, Michael Powell wrote: > > [snip] > > >> Next, you will want to configure your FreeBSD machine as a NAT gateway. > > >> In your /etc/rc.conf you will want something like gateway_enable="YES" > > >> and some form of firewall initialization[1]. The gateway_enable is what > > >> allows the forwarding of packets between your rl0 and your rl1, but the > > >> activation of NAT functionality is usually a function contained within a > > >> firewall. So conceptually, the firewall will be "in between" rl0 and rl1. > > >> > > >> There are three different firewalls you can choose from. Configuring the > > >> firewall is usually where the inexperienced get stuck. This subject > > >> material is beyond the scope of this missive, and you would do well to > > >> start reading in the Handbook. But essentially, when you configure NAT in > > >> the firewall your rl0 (connected to the ISP) will be assigned a "Public" > > >> IP address and the NAT function will translate between "Public" and > > >> "Private". > > > > With respect to "NAT", the caveat here is the assumption that your DSL/Cable > > modem is *not* already performing NAT. The situation you do not want to get > > into is having *two* NATs. The content herein is assuming that the external > > (rl0) interface is getting assigned a "Public" IP from the ISP. > > > > If this is the case wouldn't the OP set router_enable=YES instead of > gateway? No. router_enable causes routed(8) to run, which allows for announcements and withdraws of network routes via RIPv1/v2. This is something completely different than forwarding packets. What the OP wants is to route packets from his private LAN (e.g. 192.168.0.0/16) on to the Internet using NAT. That means he has to have a NAT gateway of some kind that forwards and translates packets. That means he needs gateway_enable="yes", which allows IPv4 forwarding to happen "through" the FreeBSD box. In layman's terms, it allows the FreeBSD box to be used a "Gateway" for other computers which are connected to it directly. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081015111026.GA75598>