Date: Tue, 11 Nov 2008 18:04:07 +0100 From: Michael Moll <kvedulv@kvedulv.de> To: Marius Strobl <marius@alchemy.franken.de> Cc: freebsd-sparc64@freebsd.org Subject: Re: Booting of snapshot-iso on SUN Fire V280R Message-ID: <20081111170407.GS5156@darkthrone.kvedulv.de> In-Reply-To: <20081110222744.GA64456@alchemy.franken.de> References: <20081028172823.GO5156@darkthrone.kvedulv.de> <20081028221321.GA32214@alchemy.franken.de> <20081029001112.GR5156@darkthrone.kvedulv.de> <20081029081558.GB31338@alchemy.franken.de> <20081029140204.GS5156@darkthrone.kvedulv.de> <20081110222744.GA64456@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--Q0rSlbzrZN6k9QnT Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi Marius, On Mon, Nov 10, 2008 at 11:27:44PM +0100, Marius Strobl wrote: > Could you please give the patch at: > http://people.freebsd.org/~marius/schizo_cdma.diff > a try with that machine? The patch implements the consistent > DMA syncing required for devices behind PCI-PCI, f.e. your > HMEs, for Schizo version >= 5. I.e. please test, whether > the machine still boots with the patch in place and using > a HME just works and increases the vec566: pcib0 counter > (I hope I got the numbers right; well, see `vmstat -i` > for pcib interrupts). Seems all fine, I attached verbose bootmessages. I tried one HME interface and it seems to work, counters increase also: server01# vmstat -i interrupt total rate pil4: ast 51249 67 pil13: fast 38 0 vec566: pcib0 38 0 pil12: filter 243 0 vec557: uart1 234 0 vec546: scc0 9 0 pil2: ithrd 28443 37 vec541: gem0 28048 36 vec536: sym0 72 0 vec537: sym1 30 0 vec532: hme3 38 0 vec516: isp0 255 0 pil14: tick 1516484 1987 Total 1625181 2129 [ping the machine's hme3 a while] server01# vmstat -i interrupt total rate pil4: ast 51707 66 pil13: fast 58 0 vec566: pcib0 58 0 pil12: filter 243 0 vec557: uart1 234 0 vec546: scc0 9 0 pil2: ithrd 28540 36 vec541: gem0 28125 36 vec536: sym0 72 0 vec537: sym1 30 0 vec532: hme3 58 0 vec516: isp0 255 0 pil14: tick 1535350 1986 Total 1644739 2127 Best Regards -- Michael Moll e-mail : kvedulv@kvedulv.de WWW : http://www.kvedulv.de/ GSM : +49 175 606 7861 --Q0rSlbzrZN6k9QnT Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg-V280R GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #0: Tue Nov 11 13:22:46 UTC 2008 root@flame.kvedulv.de:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b40000. real memory = 8589934592 (8192 MB) avail memory = 8385699840 (7997 MB) machine: SUNW,Sun-Fire-280R cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x22 maxtl=5 maxwin=7 initalizing intr_countp cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x22 maxtl=5 maxwin=7 INTR: Adding CPU 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs wlan: <802.11 Link Layer> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc0618758 ispfw: registered firmware <isp_1000> firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc061d606 ispfw: registered firmware <isp_1040> firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc0622fa6 ispfw: registered firmware <isp_1040_it> firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc062b054 ispfw: registered firmware <isp_1080> firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc0632aca ispfw: registered firmware <isp_1080_it> firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc063c98e ispfw: registered firmware <isp_12160> firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0643720 ispfw: registered firmware <isp_12160_it> firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc064d5bc ispfw: registered firmware <isp_2100> firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc066019e ispfw: registered firmware <isp_2200> firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0672f3c ispfw: registered firmware <isp_2300> firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc068c9b2 ispfw: registered firmware <isp_2322> firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc06aa56c ispfw: registered firmware <isp_2400> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd0 at kbdmux0 mem: <memory> null: <null device, zero device> openfirm: <Open Firmware control device> ath_hal: 0.10.5.10 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417, REGOPS_FUNC) nexus0: <Open Firmware Nexus device> nexus0: <memory-controller> mem 0x40000400000-0x40000400047 type memory-controller (no driver attached) nexus0: <memory-controller> mem 0x40000c00000-0x40000c00047 type memory-controller (no driver attached) pcib0: <Sun Host-PCI bridge> mem 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f,0x7ffee000000-0x7ffee0000ff irq 563,560,561,564,550 on nexus0 pcib0: Schizo, version 5, IGN 0x8, bus B, 33MHz pcib0: DVMA map: 0xc0000000 to 0xffffffff pcib0: bus range 0 to 1; PCI bus 0 pcib0: [FILTER] pcib0: [FILTER] pcib0: [FILTER] pcib0: [FILTER] pcib0: [FILTER] pci0: <OFW PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x108e, dev=0x1100, revid=0x01 domain=0, bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) map[10]: type Memory, range 32, base 0x7d000000, size 24, enabled map[14]: type Memory, range 32, base 0x7e000000, size 23, enabled found-> vendor=0x108e, dev=0x1101, revid=0x01 domain=0, bus=0, slot=5, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) map[10]: type Memory, range 32, base 0x100000, size 17, enabled found-> vendor=0x108e, dev=0x1103, revid=0x01 domain=0, bus=0, slot=5, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) map[10]: type Memory, range 32, base 0x1000000, size 15, memory disabled found-> vendor=0x1000, dev=0x000f, revid=0x37 domain=0, bus=0, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x124000, size 8, enabled map[18]: type Memory, range 32, base 0x126000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x37 domain=0, bus=0, slot=6, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=b, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x400, size 8, port disabled map[14]: type Memory, range 32, base 0x128000, size 8, enabled map[18]: type Memory, range 32, base 0x12a000, size 12, enabled found-> vendor=0x8086, dev=0xb154, revid=0x00 domain=0, bus=0, slot=3, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x23 (8750 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 ebus0: <PCI-EBus3 bridge> mem 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 5.0 on pci0 ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 ebus0: <flashprom> addr 0-0x1fffff (no driver attached) ebus0: <i2c> addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no driver attached) ebus0: <bbc> addr 0x100000000-0x1000fffff (no driver attached) ebus0: <power> addr 0x10030002e-0x10030002f,0x100300600-0x100300607 (no driver attached) ebus0: <i2c> addr 0x100000030-0x100000031 irq 35 (no driver attached) ebus0: <beep> addr 0x100000032-0x100000037 (no driver attached) rtc0: <Real-Time Clock> addr 0x100300070-0x100300071 irq 36 on ebus0 rtc0: registered as a time-of-day clock (resolution 1000000us) ct_to_ts([2008-11-11 16:38:47]) = 1226421527.000000000 rtc0: current time: 1226421527.000000000 ebus0: <gpio> addr 0x100300600-0x100300607 (no driver attached) ebus0: <pmc> addr 0x100300700-0x100300701 (no driver attached) ebus0: <parallel> addr 0x100300278-0x100300287,0x10030002e-0x10030002f,0x100700000-0x10070000f irq 28 (no driver attached) uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on ebus0 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on ebus0 uart1: [FILTER] uart1: fast interrupt uart1: console (115200,n,8,1) scc0: <Siemens SAB 82532 dual channel SCC> addr 0x100400000-0x10040007f irq 34 on ebus0 scc0: resetting hardware scc0: [FILTER] uart2: <SAB 82532 v3.2, channel A> on scc0 uart2: [FILTER] uart2: CTS oflow uart2: fast interrupt uart3: <SAB 82532 v3.2, channel B> on scc0 uart3: [FILTER] uart3: CTS oflow uart3: fast interrupt scc0: fast interrupt gem0: <Sun ERI 10/100 Ethernet> mem 0x100000-0x11ffff at device 5.1 on pci0 gem0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0x100000 miibus0: <MII bus> on gem0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: OUI 0x00601d, model 0x000c, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto gem0: 2kB RX FIFO, 2kB TX FIFO gem0: bpf attached gem0: Ethernet address: 00:03:ba:29:8d:26 gem0: [MPSAFE] gem0: [ITHREAD] ohci0: <Sun PCIO-2 USB controller> mem 0x1000000-0x1007fff at device 5.3 on pci0 ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 ohci0: (New OHCI DeviceId=0x1103108e) ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <Sun PCIO-2 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered sym0: <875> port 0x300-0x3ff mem 0x124000-0x1240ff,0x126000-0x126fff at device 6.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x124000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x126000 sym0: chip clock is 40218KHz sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [MPSAFE] sym0: [ITHREAD] sym1: <875> port 0x400-0x4ff mem 0x128000-0x1280ff,0x12a000-0x12afff at device 6.1 on pci0 sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x128000 sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x12a000 sym1: chip clock is 40218KHz sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: [MPSAFE] sym1: [ITHREAD] pcib1: <OFW PCI-PCI bridge> at device 3.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x1000-0xfff pcib1: memory decode 0x2000000-0x10ffffff pcib1: no prefetched decode pci1: <OFW PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x108e, dev=0x1000, revid=0x01 domain=0, bus=1, slot=0, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x2000000, size 24, enabled pcib1: requested memory range 0x2000000-0x2ffffff: good map[14]: type Memory, range 32, base 0x3000000, size 23, enabled pcib1: requested memory range 0x3000000-0x37fffff: good found-> vendor=0x108e, dev=0x1001, revid=0x01 domain=0, bus=1, slot=0, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=255 map[10]: type Memory, range 32, base 0x3800000, size 15, enabled pcib1: requested memory range 0x3800000-0x3807fff: good found-> vendor=0x108e, dev=0x1000, revid=0x01 domain=0, bus=1, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x6000000, size 24, enabled pcib1: requested memory range 0x6000000-0x6ffffff: good map[14]: type Memory, range 32, base 0x7000000, size 23, enabled pcib1: requested memory range 0x7000000-0x77fffff: good found-> vendor=0x108e, dev=0x1001, revid=0x01 domain=0, bus=1, slot=1, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=255 map[10]: type Memory, range 32, base 0x3808000, size 15, enabled pcib1: requested memory range 0x3808000-0x380ffff: good found-> vendor=0x108e, dev=0x1000, revid=0x01 domain=0, bus=1, slot=2, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0xa000000, size 24, enabled pcib1: requested memory range 0xa000000-0xaffffff: good map[14]: type Memory, range 32, base 0x7800000, size 23, enabled pcib1: requested memory range 0x7800000-0x7ffffff: good found-> vendor=0x108e, dev=0x1001, revid=0x01 domain=0, bus=1, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=255 map[10]: type Memory, range 32, base 0x3810000, size 15, enabled pcib1: requested memory range 0x3810000-0x3817fff: good found-> vendor=0x108e, dev=0x1000, revid=0x01 domain=0, bus=1, slot=3, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0xd000000, size 24, enabled pcib1: requested memory range 0xd000000-0xdffffff: good map[14]: type Memory, range 32, base 0xe000000, size 23, enabled pcib1: requested memory range 0xe000000-0xe7fffff: good found-> vendor=0x108e, dev=0x1001, revid=0x01 domain=0, bus=1, slot=3, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=b, irq=255 map[10]: type Memory, range 32, base 0x3818000, size 15, enabled pcib1: requested memory range 0x3818000-0x381ffff: good pci1: <bridge> at device 0.0 (no driver attached) hme0: <Sun HME 10/100 Ethernet> mem 0x3800000-0x3807fff at device 0.1 on pci1 hme0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x3800000 pcib1: slot 0 INTB is routed to irq 21 miibus1: <MII bus> on hme0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00601d, model 0x000c, rev. 1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: bpf attached hme0: Ethernet address: 00:03:ba:1f:72:39 pcib0: installed DMA sync wrapper for device 0.1 on bus 1 hme0: [MPSAFE] hme0: [ITHREAD] pci1: <bridge> at device 1.0 (no driver attached) hme1: <Sun HME 10/100 Ethernet> mem 0x3808000-0x380ffff at device 1.1 on pci1 hme1: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x3808000 pcib1: slot 1 INTB is routed to irq 22 miibus2: <MII bus> on hme1 ukphy2: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy2: OUI 0x00601d, model 0x000c, rev. 1 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme1: bpf attached hme1: Ethernet address: 00:03:ba:1f:72:3a pcib0: installed DMA sync wrapper for device 1.1 on bus 1 hme1: [MPSAFE] hme1: [ITHREAD] pci1: <bridge> at device 2.0 (no driver attached) hme2: <Sun HME 10/100 Ethernet> mem 0x3810000-0x3817fff at device 2.1 on pci1 hme2: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x3810000 pcib1: slot 2 INTB is routed to irq 23 miibus3: <MII bus> on hme2 ukphy3: <Generic IEEE 802.3u media interface> PHY 1 on miibus3 ukphy3: OUI 0x00601d, model 0x000c, rev. 1 ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme2: bpf attached hme2: Ethernet address: 00:03:ba:1f:72:3b pcib0: installed DMA sync wrapper for device 2.1 on bus 1 hme2: [MPSAFE] hme2: [ITHREAD] pci1: <bridge> at device 3.0 (no driver attached) hme3: <Sun HME 10/100 Ethernet> mem 0x3818000-0x381ffff at device 3.1 on pci1 hme3: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x3818000 pcib1: slot 3 INTB is routed to irq 20 miibus4: <MII bus> on hme3 ukphy4: <Generic IEEE 802.3u media interface> PHY 1 on miibus4 ukphy4: OUI 0x00601d, model 0x000c, rev. 1 ukphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme3: bpf attached hme3: Ethernet address: 00:03:ba:1f:72:3c pcib0: installed DMA sync wrapper for device 3.1 on bus 1 hme3: [MPSAFE] hme3: [ITHREAD] pcib2: <Sun Host-PCI bridge> mem 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f,0x7ffec000000-0x7ffec0000ff irq 562,560,561,564 on nexus0 pcib2: Schizo, version 5, IGN 0x8, bus A, 66MHz Timecounter "pcib2" frequency 150000000 Hz quality 100 pcib2: DVMA map: 0xc0000000 to 0xffffffff pcib2: bus range 0 to 0; PCI bus 0 pcib2: [FILTER] pcib2: [FILTER] pci2: <OFW PCI bus> on pcib2 pci2: domain=2, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=2, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1077, dev=0x2200, revid=0x05 domain=2, bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x100000, size 12, memory disabled Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x300-0x3ff mem 0x100000-0x100fff at device 4.0 on pci2 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x100000 isp0: using Memory space register mapping isp0: [MPSAFE] isp0: [ITHREAD] isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 isp0: 309 max I/O command limit set isp0: invalid NVRAM header isp0: invalid NVRAM header isp0: Using Node WWN 0x400000007f000009 isp0: Using Port WWN 0x400000007f000009 syscons0: no video adapter found. nexus0: <syscons> type unknown (no driver attached) Reducing kern.maxvnodes 262513 -> 100000 procfs registered Timecounter "tick" frequency 900000000 Hz quality 10 Timecounters tick every 1.000 msec lo0: bpf attached Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. isp0: LIP Received isp0: Loop UP isp0: Port Database Changed isp0: Firmware State <Config Wait->Ready> isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology 'Private Loop' isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 (probe6:sym0:0:6:0): Retrying Command (probe6:sym0:0:6:0): error 22 (probe6:sym0:0:6:0): Unretryable Error pass0 at sym0 bus 0 target 6 lun 0 pass0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device pass0: 3.300MB/s transfers GEOM: new disk cd0 SMP: AP CPU #1 Launched! (cd0:WsAyRmN0I:N0G::6 :W0I)T:N EeSrSr oorp t6i o(nc de0n:asbylme0d:,0 :e6x:p0e)c:t Urnerdeutcreyda bpleer fEorrrmoarn cced.0 at sym0 bus 0 target 6 lun 0 cd0: <TOSHIBA DVD-ROM SD-M1401 1009> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:sym0:0:6:0): error 6 (cd0:sym0:0:6:0): Unretryable Error (cd0:sym0:0:6:0): error 6 (cd0:sym0:0:6:0): Unretryable Error (cd0:sym0:0:6:0): error 6 (cd0:sym0:0:6:0): Unretryable Error (cd0:sym0:0:6:0): error 6 (cd0:sym0:0:6:0): Unretryable Error Trying to mount root from nfs:192.168.42.48:/install/fbsds64 NFS ROOT: 192.168.42.48:/install/fbsds64 ct_to_ts([2008-11-11 16:39:07]) = 1226421547.000000000 ct_to_ts([2008-11-11 16:39:07]) = 1226421547.000000000 start_init: trying /sbin/init lock order reversal: 1st 0xfffff8000309e070 user map (user map) @ /usr/src/sys/vm/vm_map.c:3115 2nd 0xfffff800035cd890 nfs (nfs) @ /usr/src/sys/kern/vfs_subr.c:2047 KDB: stack backtrace: _witness_debugger() at _witness_debugger+0x38 witness_checkorder() at witness_checkorder+0xcf8 __lockmgr_args() at __lockmgr_args+0x2d0 vop_stdlock() at vop_stdlock+0x38 VOP_LOCK1_APV() at VOP_LOCK1_APV+0x110 _vn_lock() at _vn_lock+0x80 vget() at vget+0x120 vnode_pager_lock() at vnode_pager_lock+0x240 vm_fault() at vm_fault+0x208 trap_pfault() at trap_pfault+0x198 trap() at trap+0xd0 -- fast data access mmu miss tar=0x2a2001 %o7=0xc0080e00 -- userland() at 0x10015c user trace: trap %o7=0xc0080e00 pc 0x10015c, sp 0x7fdffffe531 pc 0, sp 0x7fdffffe5f1 done hme3: link state changed to UP --Q0rSlbzrZN6k9QnT--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081111170407.GS5156>