Date: Fri, 21 Nov 2008 01:43:29 +0100 From: Albert Shih <Albert.Shih@obspm.fr> To: Giorgos Keramidas <keramida@ceid.upatras.gr> Cc: freebsd-questions@freebsd.org Subject: Re: Wifi Card for laptop Message-ID: <20081121004329.GC5215@obspm.fr> In-Reply-To: <87y6ze4u5j.fsf@kobe.laptop> References: <20081118145535.GB30563@obspm.fr> <87y6ze4u5j.fsf@kobe.laptop>
next in thread | previous in thread | raw e-mail | index | archive | help
Le 20/11/2008 à 11:35:20+0200, Giorgos Keramidas a écrit Hi, First thanks you for you help In fact I make the wifi run by using wpi driver. > If you can find a PC-CARD (or `PCMCIA') that uses one of the supported > chipsets, then just go for it. > > To see if the internal network interface card or wireless adapter work, > you can try running: > > % pciconf -lv > > Save this to a text file: > > % pciconf -lv > pciconf.txt > > Then you can use a USB flash drive to transfer the text file to a > machine that has email connectivity and post it here. We can try to go > through the list of devices and check hardware compatibility for you. > > If you do that, please include as much information as possible about the > FreeBSD version you are using, and any other bits you think are useful > to understand what hardware you are using (i.e. laptop model, laptop > maker, the output of the ``uname -a'' command, and so on). But if I can help to make more hardware working on FreeBSD I would happy to do that so let's go: Hardware : Dell laptop Precision M6300 Running wihtout problem: touchpad X11 (using nv drivers but not the «official» because I'm running amd64 version). running but with some problem : wifi card : chipset 3945 drivers : wpi (compiling in kernel) problem : sometime the wifi go down (the AP is at < 1m) and when I try to make that up again he don't work. If I try the keyboard touch (Fn+F2) that's can crash (reboot) the computer Find drivers but not running : sound. I got [root@ ~]# dmesg|grep pcm pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0 pcm0: [ITHREAD] pcm0: <HDA Codec: Sigmatel STAC9205> pcm0: <HDA Driver Revision: 20080420_0052> [root@ ~]# but I don't have dsp device in my /dev so no sound.... No driver (and of course not working) NetXtreme BCM5756ME Gigabit Ethernet PCIe USB ports working. I've not try Firewire, pccard, MIC. I'm running FreeBSD 7.1-PRERELEASE make after csup (with tag=RELENG_7) and make buildworld;kernel. I can make «any» test you want. Just ask me. Bests regards. **************************************************************************** Here my pciconf -lv stb0@pci0:0:0:0: class=0x060000 card=0x01f81028 chip=0x2a008086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x01f81028 chip=0x2a018086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port' class = bridge subclass = PCI-PCI uhci0@pci0:0:26:0: class=0x0c0300 card=0x01f81028 chip=0x28348086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI' class = serial bus subclass = USB uhci1@pci0:0:26:1: class=0x0c0300 card=0x01f81028 chip=0x28358086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI' class = serial bus subclass = USB ehci0@pci0:0:26:7: class=0x0c0320 card=0x01f81028 chip=0x283a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller' class = serial bus subclass = USB pcm0@pci0:0:27:0: class=0x040300 card=0x01f81028 chip=0x284b8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8' class = multimedia pcib2@pci0:0:28:0: class=0x060400 card=0x01f81028 chip=0x283f8086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCIe Port 1' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x01f81028 chip=0x28418086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCIe Port 2' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:3: class=0x060400 card=0x01f81028 chip=0x28458086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCIe Port 4' class = bridge subclass = PCI-PCI pcib5@pci0:0:28:5: class=0x060400 card=0x01f81028 chip=0x28498086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) PCIe Port 6' class = bridge subclass = PCI-PCI uhci2@pci0:0:29:0: class=0x0c0300 card=0x01f81028 chip=0x28308086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI' class = serial bus subclass = USB uhci3@pci0:0:29:1: class=0x0c0300 card=0x01f81028 chip=0x28318086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI' class = serial bus subclass = USB uhci4@pci0:0:29:2: class=0x0c0300 card=0x01f81028 chip=0x28328086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB UHCI' class = serial bus subclass = USB ehci1@pci0:0:29:7: class=0x0c0320 card=0x01f81028 chip=0x28368086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) USB2 EHCI' class = serial bus subclass = USB pcib6@pci0:0:30:0: class=0x060401 card=0x01f81028 chip=0x24488086 rev=0xf2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x01f81028 chip=0x28118086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'ICH8M (ICH8 Family) LPC Interface Controller' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x01f81028 chip=0x28508086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) Ultra ATA Storage Controllers' class = mass storage subclass = ATA atapci1@pci0:0:31:2: class=0x01018f card=0x01f81028 chip=0x28288086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'ICH8M (ICH8 Family) 3 port SATA Controller' class = mass storage subclass = ATA none0@pci0:0:31:3: class=0x0c0500 card=0x01f81028 chip=0x283e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801H (ICH8 Family) SMBus Controller' class = serial bus subclass = SMBus vgapci0@pci0:1:0:0: class=0x030000 card=0x019b1028 chip=0x040d10de rev=0xa1 hdr=0x00 vendor = 'Nvidia Corp' class = display subclass = VGA wpi0@pci0:12:0:0: class=0x028000 card=0x10218086 chip=0x42228086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '10418086 Intel 3945ABG Wireless LAN controller' class = network none1@pci0:9:0:0: class=0x020000 card=0x01f81028 chip=0x167414e4 rev=0x00 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5756ME Gigabit Ethernet PCIe' class = network subclass = ethernet fwohci0@pci0:3:1:0: class=0x0c0010 card=0x01f81028 chip=0x08321180 rev=0x05 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'unknown IEEE 1394 (4 pin firewire) chip)' class = serial bus subclass = FireWire none2@pci0:3:1:1: class=0x080501 card=0x01f81028 chip=0x08221180 rev=0x22 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller' class = base peripheral none3@pci0:3:1:2: class=0x088000 card=0x01f81028 chip=0x08431180 rev=0x12 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'unknown Ricoh MMC Host Controller' class = base peripheral none4@pci0:3:1:3: class=0x088000 card=0x01f81028 chip=0x05921180 rev=0x12 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = '13871043 Ricoh Memory Stick Host Controller' class = base peripheral none5@pci0:3:1:4: class=0x088000 card=0x01f81028 chip=0x08521180 rev=0x12 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'unknown Ricoh xD-Picture Card Host Controller' class = base peripheral ********************************************************************************* Here the dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #1: Wed Nov 19 03:20:47 CET 2008 root@XXXXXXXXXXX:/usr/obj/usr/src/sys/XXX Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz (2592.78-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 4278091776 (4079 MB) avail memory = 4124418048 (3933 MB) ACPI APIC Table: <DELL M08 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <DELL M08 > on motherboard acpi0: [ITHREAD] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of 100000, dfd83c00 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xf5000000-0xf5ffffff,0xe0000000-0xefffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf6ffc000-0xf6ffffff irq 21 at device 27.0 on pci0 pcm0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci11: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci12: <ACPI PCI bus> on pcib3 wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xf1fff000-0xf1ffffff irq 17 at device 0.0 on pci12 wpi0: Ethernet address: 00:1f:3c:c8:fa:20 wpi0: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci13: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci9: <ACPI PCI bus> on pcib5 pci9: <network, ethernet> at device 0.0 (no driver attached) uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 usb6: USB revision 2.0 uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 uhub6: 6 ports with 6 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib6 fwohci0: <1394 Open Host Controller Interface> mem 0xf1aff800-0xf1afffff irq 19 at device 1.0 on pci3 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 48:4f:c0:00:0c:7c:04:90 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1144000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 4a:4f:c0:7c:04:90 fwe0: Ethernet address: 4a:4f:c0:7c:04:90 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 48:4f:c0:00:0c:7c:04:90 @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode pci3: <base peripheral> at device 1.1 (no driver attached) pci3: <base peripheral> at device 1.2 (no driver attached) pci3: <base peripheral> at device 1.3 (no driver attached) pci3: <base peripheral> at device 1.4 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 18 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub0 uhub7: 4 ports with 3 removable, self powered ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub7 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DVDR <TSSTcorp DVD+/-RW TS-L632H/D400> at ata0-master UDMA33 ad4: 190782MB <Seagate ST9200423ASG DE14> at ata2-master SATA300 pcm0: <HDA Codec: Sigmatel STAC9205> pcm0: <HDA Driver Revision: 20080420_0052> GEOM_LABEL: Label for provider ad4s1 is msdosfs/DellUtility. GEOM_LABEL: Label for provider ad4s2 is ntfs/OS. acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata0 bus 0 target S0M Pl:u nA P0 CP Uc d#0:1 L<aTuSnScThceodr!p DVD+-RW TS-L632H D400> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s3a WARNING: / was not properly dismounted wpi0: timeout resetting Tx ring 1 wpi0: timeout resetting Tx ring 3 wpi0: timeout resetting Tx ring 4 wpi0: link state changed to UP -- Albert SHIH SIO batiment 15 Observatoire de Paris Meudon 5 Place Jules Janssen 92195 Meudon Cedex Téléphone : 01 45 07 76 26 Heure local/Local time: Ven 21 nov 2008 01:23:01 CET
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081121004329.GC5215>