Date: Sat, 27 Dec 2008 09:54:30 +0100 From: Raoul <rmgls@freebsd.org> To: freebsd-current@freebsd.org Subject: HEADSUP usb2 (usb4bsd) to become default Message-ID: <20081227085431.B4FF9700@smtp6-g19.free.fr>
next in thread | raw e-mail | index | archive | help
Hi Hans Peter, and Alfred, we are about to switch to usb2 stack; and my prolific ucom interface does not work. i applied the paatch given by Alfred some days ago, to GENERIC and compiled the new kernel without any problem. good news my usb keyboard works quite well. but, as you can see below, upcom is detected; but does not work. any hint would be helpful and greatly appreciated. thanks for your time and your effors. raoul rmgls@free.fr my config: sony s5 laptop running current from yesterday evening. in loader.conf: sysctl hw.usb2.ucom.debug=15 sysctl hw.usb2.uftdi.debug=15 the relevant part of the demesg: uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 17 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x003b usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x0010 usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 21 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x0010 usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 17 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x0010 usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0x80004000-0x800043ff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. Timecounter "TSC" frequency 2128014053 Hz quality 800 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ugen0.1: <Intel> at usbus0 ushub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ushub0: 2 ports with 2 removable, self powered usbus1: 12Mbps Full Speed USB v1.0 ugen1.1: <Intel> at usbus1 ushub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ushub1: 2 ports with 2 removable, self powered usbus2: 12Mbps Full Speed USB v1.0 ugen2.1: <Intel> at usbus2 ushub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ushub2: 2 ports with 2 removable, self powered usbus3: 12Mbps Full Speed USB v1.0 ugen3.1: <Intel> at usbus3 ushub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ushub3: 2 ports with 2 removable, self powered usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <Intel> at usbus4 ushub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ushub4: 8 ports with 8 removable, self powered ugen0.2: <Prolific Technology Inc.> at usbus0 uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 2> on usbus0 ugen2.2: <ALPS> at usbus2 WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081227085431.B4FF9700>