Date: Mon, 5 Jan 2009 01:35:01 +0900 From: Norikatsu Shigemura <nork@FreeBSD.org> To: Hans Petter Selasky <hselasky@c2i.net> Cc: Alfred Perlstein <alfred@FreeBSD.org>, pyunyh@gmail.com, Boris Samorodov <bsam@ipt.ru>, freebsd-current@FreeBSD.org, Norikatsu Shigemura <nork@FreeBSD.org> Subject: Re: Call for axe(4) testers. Message-ID: <20090105013501.dc07970c.nork@FreeBSD.org> In-Reply-To: <200901041715.06163.hselasky@c2i.net> References: <47297827@bb.ipt.ru> <200901011233.15537.hselasky@c2i.net> <20090105000014.a11a4d7f.nork@FreeBSD.org> <200901041715.06163.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi hps!
On Sun, 4 Jan 2009 17:15:05 +0100
Hans Petter Selasky <hselasky@c2i.net> wrote:
> > I tested on r186730 by alfred@.
> > 1. When my all devices are detached, OS is freeze(not panic).
> When are all devices detached? Can you explain your cable setup and where you
> unplug? Are there any USB HUBs involved?
Ah, I did following steps:
foreach (GU-1000T UE-200TX-G LUA-U2-KTX) {
Plug
Unplug -> Freeze
No key accept
reset
}
On plug:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ugen1.2: <ASIX Electronics> at usbus1
axe0: <ASIX Electronics AX88772, rev 2.00/0.01, addr 2> on usbus1
miibus1: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: Ethernet address: 00:90:cc:e7:6b:20
axe0: link state changed to DOWN
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
devinfo -rv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ehci0 pnpinfo vendor=0x8086 device=0x265c subvendor=0x10f7 subdevice=0x8338 class=0x0c0320 at slot=29 function=7 handle=\_SB_.PCI0.EHCI
I/O memory addresses:
0xb0040000-0xb00403ff
usbus1
ushub1
axe0 pnpinfo vendor=0x0b95 product=0x7720 devclass=0xff devsubclass=0xff sernum="" intclass=0xff intsubclass=0xff at port=1 interface=0
miibus1
ukphy0 pnpinfo oui=0xec6 model=0x1 rev=0x1 at phyno=16
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
I have no USB HUBs, so I pluged into NOTE PC's USB port.
usbconfig list
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <AX88772 ASIX Electronics> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> > 2. GU-1000T doesn't work, but UE-200TX-G works well.
> If your kernel is compiled with KDB, then try pressing CTRL+ALT+ESC to enter
> the debugger after the freeze. Then dump the backtrace of all the threads.
> Look for function names containing the word "axe".
Any key(CTRL+ALT+DEL, etc..) didn't accept. But I didn't hit
CTRL+ALT+ESC. So I'll try to hit it.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090105013501.dc07970c.nork>