Date: Thu, 12 Feb 2009 12:42:51 +0900 From: Pyun YongHyeon <pyunyh@gmail.com> To: Hiroharu Tamaru <tamaru@myn.rcast.u-tokyo.ac.jp> Cc: thompsa@FreeBSD.org, freebsd-usb@freebsd.org Subject: Re: USB2: [was: umass not detected correctly, axe not transmitting] AXE problems Message-ID: <20090212034251.GB6313@michelle.cdnetworks.co.kr> In-Reply-To: <20090212023723.GA6313@michelle.cdnetworks.co.kr> References: <sa64oz1lacr.wl%tamaru@myn.rcast.u-tokyo.ac.jp> <200902110954.37659.hselasky@c2i.net> <sa6y6wdjbts.wl%tamaru@myn.rcast.u-tokyo.ac.jp> <200902111657.38129.hselasky@c2i.net> <sa6vdrgkjbw.wl%tamaru@myn.rcast.u-tokyo.ac.jp> <20090212023723.GA6313@michelle.cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 12, 2009 at 11:37:23AM +0900, Pyun YongHyeon wrote: > On Thu, Feb 12, 2009 at 01:51:47AM +0900, Hiroharu Tamaru wrote: > > > > At Wed, 11 Feb 2009 16:57:36 +0100, Hans Petter Selasky wrote: > > > > > > ugen3.3: <ASIX Electronics> at usbus3 > > > > > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3 > > > > > > axe0: PHYADDR 0xe0:0x18 > > > > > > miibus0: <MII bus> on axe0 > > > > > > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0 > > > > > > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > > > > > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0 > > > > > > ue0: Ethernet address: 00:90:cc:xx:xx:xx > > > > > > ue0: link state changed to DOWN > > > > > > ue0: link state changed to UP > > > > > > > > > > > > > > > > > > > Turn on debugging: > > > > > > > > > > sysctl hw.usb2.axe.debug=15 > > > > > > > > > > And repeat test. > > > > > > > > with hw.usb2.axe.debug=15, I have: > > > > > > > > ugen3.3: <ASIX Electronics> at usbus3 (disconnected) > > > > pid 3244 (dhclient), uid 65: exited on signal 11 > > > > ugen3.3: <ASIX Electronics> at usbus3 > > > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 3> on usbus3 > > > > axe0: PHYADDR 0xe0:0x18 > > > > miibus0: <MII bus> on axe0 > > > > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus0 > > > > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > > > 1000baseT-FDX, auto ue0: <USB Ethernet> on axe0 > > > > ue0: Ethernet address: 00:90:cc:f7:bc:2e > > > > ue0: link state changed to DOWN > > > > ue0: link state changed to UP > > > > > > > > > > > The hardware is a PLANEX GU-1000T ethernet adapter. > > > > > > > I have the same USB controller and latest CURRENT works. > > axe0: <ASIX Electronics AX88178, rev 2.00/0.01, addr 4> on usbus1 > axe0: PHYADDR 0xe0:0x18 > miibus2: <MII bus> on axe0 > ciphy0: <Cicada VSC8211 10/100/1000TX PHY> PHY 24 on miibus2 > ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto > ue0: <USB Ethernet> on axe0 > ue0: Ethernet address: 00:90:cc:ef:b9:f6 > ue0: link state changed to DOWN > > I manually loaded necessary kernel modules as my kernel does not > have any USB device entries. The only regression since I tried USB2 > axe(4) was failure of symbol resolving of link_elf in > usb2_ethernet.ko module. Attached simple patch seems to fix that. > > To Hans, > I think MODULE_DEPEND should come first before any reference to > the module in usb2_ethernet.c. Since mii_phy_probe live in > miibus(4) I added it too. > Hans, I managed to track down Hiroharu's issue in axe(4). It seems Andrew removed link handling code that ensures correct state of established link in r188412. I believe we have to revert changes made in axe_cfg_mii_statchg() and axe_tick(). I have no idea what was happend in P4, you checked in the link handling code I submitted.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090212034251.GB6313>