Date: Thu, 30 Apr 2009 08:18:30 -0700 From: David Wolfskill <david@catwhisker.org> To: current@freebsd.org Subject: Re: Panic "Fatal trap 18: integer divide fault while in kernel mode" Message-ID: <20090430151830.GW1387@albert.catwhisker.org> In-Reply-To: <20090429161626.GQ1387@albert.catwhisker.org> References: <20090429161626.GQ1387@albert.catwhisker.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--UKsZWh/ZtaJX4ozz Content-Type: multipart/mixed; boundary="lFRK9w0o3gensELN" Content-Disposition: inline --lFRK9w0o3gensELN Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Apr 29, 2009 at 09:16:26AM -0700, David Wolfskill wrote: > My build machine had no trouble building & booting r191662, but my > laptop's boot came to a screeching halt rather quickly. Here's > cut/paste for serial console of the single-user mode boot sequence: > ... > Fatal trap 18: integer divide fault while in kernel mode > cpuid =3D 0; apic id =3D 00 > instruction pointer =3D 0x20:0xc0b34433 > stack pointer =3D 0x28:0xc1420d00 > frame pointer =3D 0x28:0xc1420d20 > code segment =3D base 0x0, limit 0xfffff, type 0x1b > =3D DPL 0, pres 1, def32 1, gran 1 > processor eflags =3D interrupt enabled, resume, IOPL =3D 0 > current process =3D 0 (swapper) > [thread pid 0 tid 100000 ] > Stopped at cpu_topo+0x43: idivl %ecx,%eax > db>=20 >=20 >=20 > [Note: I've been in the habit of tracking head/CURRENT on a daily basis, > and had no problems building today's while running yesterday's, which > was r1916?? -- sorry; looks as if I'll need to boot from a different > kernel to get that info. (I've already powered off my build machine, > and it's at home, while I'm at work.)] OK; that earlier revision (from Tuesday, which worked) was r191620. I just built & tried to boot r191682; same symptoms. I've attached a copy of dmesg.boot from the failing machine when it's running r191620. > Is there anything of use I might get from DDB? I can still poke around there for a bit, if that would be useful. Peace, david --=20 David H. Wolfskill david@catwhisker.org Depriving a girl or boy of an opportunity for education is evil. See http://www.catwhisker.org/~david/publickey.gpg for my public key. --lFRK9w0o3gensELN Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-CURRENT #1024 r191620: Tue Apr 28 07:33:08 PDT 2009 root@g1-37.catwhisker.org:/common/S4/obj/usr/src/sys/CANARY WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1125000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc112514c. Preloaded elf module "/boot/kernel/if_an.ko" at 0xc11251f8. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc11252a4. Preloaded elf module "/boot/kernel/radeon.ko" at 0xc1125350. Preloaded elf module "/boot/kernel/drm.ko" at 0xc11253fc. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2392948048 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CP= U) Origin =3D "GenuineIntel" Id =3D 0xf27 Stepping =3D 7 Features=3D0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA= ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x400<CNXT-ID> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte = line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte lin= e size real memory =3D 805306368 (768 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001425000 - 0x000000002f2d9fff, 770396160 bytes (188085 pages) avail memory =3D 769642496 (733 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry =3D 0xffe90 (c00ffe90) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry =3D f0000:e2f4 Rev =3D 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu 0 snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_bu= ffersize=3D16384 feeder_rate_min=3D1 feeder_rate_max=3D2016000 feeder_rate_= round=3D25 wlan: <802.11 Link Layer> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> random: <entropy source, Software, Yarrow> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Apr 27 2009 06:52:= 16) ACPI: RSDP @ 0x0xfde50/0x0014 (v 0 DELL ) ACPI: RSDT @ 0x0xfde64/0x002C (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: FACP @ 0x0xfde90/0x0074 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) ACPI: DSDT @ 0x0xfffe4000/0x314E (v 1 INT430 SYSFexxx 0x00001001 MSFT 0x01= 00000E) ACPI: FACS @ 0x0x2ffff800/0x0040 ACPI: BOOT @ 0x0xfdf04/0x0028 (v 1 DELL CPi R 0x27D40107 ASL 0x00000= 061) npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: wakeup code va 0xc3ce3000 pa 0x1000 atpic: Programming IRQ9 as level/low pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D1a308086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.FDIS -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB1.AD1_ -> bus 0 dev 29 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIRQ -> bus 0 dev 31 func 0 acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 2fef0000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 9 10 11 Validation 0 11 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 5 7 9 10 11 Validation 0 11 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 11 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x04 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0106, statreg=3D0x2090, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 26, ena= bled found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x04 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x2482, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=3D0x8086, dev=3D0x2487, revid=3D0x02 domain=3D0, bus=3D0, slot=3D29, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D11 map[20]: type I/O Port, range 32, base 0xbf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x42 domain=3D0, bus=3D0, slot=3D30, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248c, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x8086, dev=3D0x248a, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[20]: type I/O Port, range 32, base 0xbfa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=3D0x8086, dev=3D0x2485, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D5 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc80, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=3D0x8086, dev=3D0x2486, revid=3D0x02 domain=3D0, bus=3D0, slot=3D31, func=3D6 class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 map[10]: type I/O Port, range 32, base 0xd400, size 8, enabled map[14]: type I/O Port, range 32, base 0xdc00, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xd8000000-0xe7ffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x10de, dev=3D0x0174, revid=3D0xa3 domain=3D0, bus=3D1, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0027, statreg=3D0x02b0, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled pcib1: requested memory range 0xfc000000-0xfcffffff: good map[14]: type Prefetchable Memory, range 32, base 0xe0000000, size 27, ena= bled pcib1: requested memory range 0xe0000000-0xe7ffffff: good map[18]: type Prefetchable Memory, range 32, base 0xdff80000, size 19, ena= bled pcib1: requested memory range 0xdff80000-0xdfffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe0000000-0xe7= ffffff,0xdff80000-0xdfffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f i= rq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup =3D 0x0000 usbus0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f i= rq 11 at device 29.2 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup =3D 0x0000 usbus1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: no prefetched decode pcib2: Subtractively decoded bridge. ACPI: Found matching pin for 2.1.INTA at func 0: 255 ACPI: Found matching pin for 2.1.INTA at func 1: 255 ACPI: Found matching pin for 2.1.INTA at func 2: 11 ACPI: Found matching pin for 2.3.INTA at func 0: 11 ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a (2500 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec80, size 7, enabled pcib2: requested I/O range 0xec80-0xecff: in range map[14]: type Memory, range 32, base 0xf8fffc00, size 7, enabled pcib2: requested memory range 0xf8fffc00-0xf8fffc7f: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D0 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0xac42, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D1 class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=3D0x104c, dev=3D0x8027, revid=3D0x00 domain=3D0, bus=3D2, slot=3D1, func=3D2 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0116, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf8fff000, size 11, enabled pcib2: requested memory range 0xf8fff000-0xf8fff7ff: good map[14]: type Memory, range 32, base 0xf8ff8000, size 14, enabled pcib2: requested memory range 0xf8ff8000-0xf8ffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=3D0x1260, dev=3D0x3873, revid=3D0x01 domain=3D0, bus=3D2, slot=3D3, func=3D0 class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0017, statreg=3D0x0290, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xec000000, size 12, ena= bled pcib2: requested memory range 0xec000000-0xec000fff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0= xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:e9:c9:41 xl0: [MPSAFE] xl0: [ITHREAD] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000 cbb0: Found memory at 80000000 cbb0: Secondary bus is 4 cbb0: Setting primary bus to 2 cbb0: Secondary bus set to 3 subbus 4 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: [FILTER] cbb0: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80000000 0x020000a0 0x20040302 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024d021 0x00000600 0x000f0000 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: cbb1 requested memory range 0x0-0xffffffff: good cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80001000 cbb1: Found memory at 80001000 cbb1: Secondary bus is 5 cbb1: Setting primary bus to 2 cbb1: Secondary bus set to 5 subbus 6 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: [FILTER] cbb1: PCI Configuration space: 0x00: 0xac42104c 0x02100007 0x06070000 0x00822008=20 0x10: 0x80001000 0x020000a0 0x20060502 0xfffff000=20 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20 0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b=20 0x40: 0x00d51028 0x00000001 0x00000000 0x00000000=20 0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20 0x80: 0x3024f021 0x00000600 0x000f0001 0x05033002=20 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000=20 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000=20 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000=20 fwohci0: <Texas Instruments PCI4451> mem 0xf8fff000-0xf8fff7ff,0xf8ff8000-0= xf8ffbfff irq 11 at device 1.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf8fff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 42:4f:c0:00:07:2c:30:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xd215e0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 42:4f:c0:2c:30:41 fwe0: bpf attached fwe0: Ethernet address: 42:4f:c0:2c:30:41 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 42:4f:c0:00:07:2c:30:41 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS= TER mode wi0: <Intersil Prism2.5> mem 0xec000000-0xec000fff irq 11 at device 3.0 on = pci2 wi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xec000000 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station (1.8.0) wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: [MPSAFE] wi0: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x20001 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 ata1: stat0=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x0 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: <Intel ICH3 (82801CA)> port 0xd800-0xd8ff,0xdc80-0xdcbf irq 9 at devi= ce 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: <Cirrus Logic CS4205 AC97 Codec (id =3D 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bi= t DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic,= AMAP pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=3D750ms flags=3D0x8000001e pcm0: sndbuf_setmap 179c000, 4000; 0xdd9e0000 -> 179c000 pcm0: sndbuf_setmap 17a0000, 4000; 0xdd9e4000 -> 17a0000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc1: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on= acpi0 fdc1: ic_type 90 part_id 80 fdc1: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: fast interrupt uart0: console (9600,n,8,1) ppc0: using extended I/O port range ppc0: SPP ECP ECP+EPP ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached plip0: [MPSAFE] plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff pnpid ORM0= 000 on isa0 pcf0 failed to probe on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: No FDOUT register! fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) sn0: not probed (disabled) uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 uart2: not probed (disabled) uart3: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2392948048firewire0: 1 nodes, maxhop <=3D 0 cab= le IRM irm(0) (me)=20 firewire0: bus manager 0=20 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forward= ing enabled, default to deny, logging unlimited DUMMYNET with IPv6 initialized (040826) lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00020001 ata0: New devices: 00020001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Status is 0x30000006 Status is 0x30000410 cbb1: card inserted: event=3D0x00000000, state=3D30000410 pccard1: chip_socket_enable cbb_pcic_socket_enable: cbb1: cbb_power: 5V fdc1: output ready timeout uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered fdc1: output ready timeout fdc1: output ready timeout fdc1: output ready timeout fdc1: output ready timeout fdc1: output ready timeout fdc1: output ready timeout acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery0: battery initialization done, tried 1 times battery1: battery initialization start battery1: battery initialization done, tried 1 times ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D40 wire pccard1: read_cis ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire fdc1: output ready timeout fdc1: input ready timeout fdc1: input ready timeout fdc1: output ready timeout fdc1: input ready timeout fdc1: input ready timeout fdc1: output ready timeout fdc1: input ready timeout fdc1: input ready timeout fdc1: output ready timeout fdc1: input ready timeout fdc1: input ready timeout ad0: setting PIO4 on ICH3 chip pcib2: pccard1 requested memory range 0x88000000-0xffffffff: good cis mem map 0xdda26000 (resource: 0x88000000) pccard1: CIS tuple chain: CISTPL_DEVICE type=3Dfuncspec speed=3D100ns 0x1 0x3 0xdc 00 0xff CISTPL_DEVICE_A type=3Dfuncspec speed=3D100ns 0x17 0x3 0xdc 00 0xff unhandled CISTPL 0x14 CISTPL_NO_LINK 0x14 00 CISTPL_VERS_1 0x15 0x31 0x4 0x1 0x43 0x69 0x73 0x63 0x6f 0x20 0x53 0x79 0x73 0x74 0x65 0= x6d 0x73 00 0x33 0x35 0x30 0x20 0x53 0x65 0x72 0x69 0x65 0x73 0x20 0x57 0x69 0= x72 0x65 0x6c 0x65 0x73 0x73 0x20 0x4c 0x41 0x4e 0x20 0x41 0x64 0x61 0x70 0x74= 0x65 0x72 00 0xff CISTPL_MANFID 0x20 0x4 0x5f 0x1 0xa 00 CISTPL_FUNCID 0x21 0x2 0x6 00 CISTPL_FUNCE 0x22 0x2 0x1 0x7 CISTPL_FUNCE 0x22 0x5 0x2 0xc0 0xd8 0xa7 00 CISTPL_FUNCE 0x22 0x2 0x3 0x7 CISTPL_CONFIG 0x1a 0x5 0x1 0x5 0xe0 0x3 0x7 CISTPL_CFTABLE_ENTRY 0x1b 0xc 0xc5 0x1 0x1a 0x9 0x55 0x66 0x1 0x55 0x46 0x30 0xff 0xff CISTPL_END ff pccard1: check_cis_quirks pccard1: CIS version PCCARD 2.0 or 2.1 pccard1: CIS info: Cisco Systems, 350 Series Wireless LAN Adapter pccard1: Manufacturer code 0x15f, product 0xa pccard1: function 0: network adapter, ccr addr 0x3e0 mask 0x7 pccard1: function 0, config table entry 5: I/O card; irq mask 0xffff; iomas= k 0x6, iospace 0-0x3f; io16 irqlevel pccard1: functions scanning pccard1: Card has 1 functions. pccard_mfc is 0 pccard1: I/O rid 0 start 0 end 0xffffffff pcib2: pccard1 requested I/O range 0x100-0xffffffff: in range cbb_pcic_socket_enable: pcib2: pccard1 requested memory range 0x88000000-0xffffffff: good pccard1: ccr_res =3D=3D 0x88000000-0x880003ff, base=3D0x3e0 pccard1: function 0 CCR at 0 offset 0x3e0: 0x45 0x80 0x22 0, 0 0 0 0, 0 an0: <Cisco Systems 350 Series Wireless LAN Adapter> at port 0x100-0x13f ir= q 11 function 0 config 5 on pccard1 an0: got RSSI <-> dBM map an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps an0: WARNING: using obsoleted if_watchdog interface an0: bpf attached an0: Ethernet address: 00:40:96:40:5d:44 an0: [GIANT-LOCKED] an0: [ITHREAD] pccard1: function 0 CCR at 0 offset 0x3e0 mask 0x7: 0x45 0x80 0x22 0, 0 0 0= 0, 0 ad0: setting UDMA100 on ICH3 chip ad0: 114473MB <FUJITSU MHV2120AH 000000A0> at ata0-master UDMA100 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH3 chip acd0: setting UDMA33 on ICH3 chip acd0: <HL-DT-STGEOM: ad0s1: geometCD-RW/DVD-ROM GCC-4241N/A100> CDRW drive = at ata0 as slave acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UD= MA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata1: Identifying devices: 00000000 ata1: New devices: 00000000 (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pcm0: measured ac97 link rate at 48005 Hz, will use 48000 Hz ry doeacd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? s no(probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0=20 (probe0:ata0:0:1:0): CAM Status: SCSI Status Error (probe0:ata0:0:1:0): SCSI Status: Check Condition (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present (probe0:ata0:0:1:0): (probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0= =20 (probe0:ata0:0:1:0): NOT READY asc:3a,0 (probe0:ata0:0:1:0): Medium not present Unretryable error (probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error t ma(probe0:ata0:0:1:0): error 6 (probe0:ata0:0:1:0): Unretryable Error tch labelacd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (15h,63s !=3D 16h,63s). pass0 at ata0 bus 0 target 1 lun 0 pass0:GEOM: ad0s2: geometry does not match label (15h,63s !=3D 16h,63s). <HL-DT-ST RW/DVD GCC-424GEOM: ad0s3: geometry does not match label (15h,63= s !=3D 16h,63s). 1N A100> Removable CD-ROM SCSIGEOM: ad0s4: geometry does not match label (1= 5h,63s !=3D 16h,63s). -0 device=20 pass0: 33.000MB/s transfers WARNING: WITNESS option enabled, expect reduced performance. (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error cd0 at ata0 bus 0 target 1 lun 0 cd0: <HL-DT-ST RW/DVD GCC-4241N A100> Removable CD-ROM SCSI-0 device=20 cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present GEOM_LABEL: Label for provider ad0s1a is ufsid/49728364be0e44f6. GEOM_LABEL: Label for provider ad0s1d is ufsid/49728370ef6a1bb4. GEOM_LABEL: Label for provider ad0s2a is ufsid/49a348ea5cda9036. GEOM_LABEL: Label for provider ad0s2d is ufsid/49a349468de1cc38. GEOM_LABEL: Label for provider ad0s3a is ufsid/49728735d8f70a93. GEOM_LABEL: Label for provider ad0s3d is ufsid/4972878099f22d95. GEOM_LABEL: Label for provider ad0s4a is ufsid/4972895e7ecd233a. GEOM_LABEL: Label for provider ad0s4d is ufsid/49728992a5657d36. GEOM_LABEL: Label for provider ad0s4e is ufsid/49728b978f782469. GEOM_LABEL: Label for provider ad0s4f is ufsid/49728bd3f3f26324. GEOM_LABEL: Label for provider ad0s4g is ufsid/49729d577ed6f96a. GEOM_LABEL: Label for provider ad0s4h is ufsid/4972a77e3d8b378a. GEOM: new disk cd0 scsi_cd.c::ioctl cmd=3D4400648b error=3D25 (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error (cd0:ata0:0:1:0): error 6 (cd0:ata0:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s4a ct_to_ts([2009-04-30 12:23:29]) =3D 1241094209.000000000 start_init: trying /sbin/init GEOM_LABEL: Label ufsid/4972895e7ecd233a removed. GEOM_LABEL: Label for provider ad0s4a is ufsid/4972895e7ecd233a. GEOM_LABEL: Label ufsid/49a348ea5cda9036 removed. GEOM_LABEL: Label for provider ad0s2a is ufsid/49a348ea5cda9036. GEOM_LABEL: Label ufsid/49a349468de1cc38 removed. GEOM_LABEL: Label for provider ad0s2d is ufsid/49a349468de1cc38. GEOM_LABEL: Label ufsid/49728992a5657d36 removed. GEOM_LABEL: Label for provider ad0s4d is ufsid/49728992a5657d36. GEOM_LABEL: Label ufsid/49728bd3f3f26324 removed. GEOM_LABEL: Label for provider ad0s4f is ufsid/49728bd3f3f26324. GEOM_LABEL: Label ufsid/49729d577ed6f96a removed. GEOM_LABEL: Label for provider ad0s4g is ufsid/49729d577ed6f96a. GEOM_LABEL: Label ufsid/4972a77e3d8b378a removed. GEOM_LABEL: Label for provider ad0s4h is ufsid/4972a77e3d8b378a. GEOM_LABEL: Label ufsid/49728364be0e44f6 removed. GEOM_LABEL: Label for provider ad0s1a is ufsid/49728364be0e44f6. GEOM_LABEL: Label ufsid/49728370ef6a1bb4 removed. GEOM_LABEL: Label for provider ad0s1d is ufsid/49728370ef6a1bb4. GEOM_LABEL: Label ufsid/49728735d8f70a93 removed. GEOM_LABEL: Label for provider ad0s3a is ufsid/49728735d8f70a93. GEOM_LABEL: Label ufsid/4972878099f22d95 removed. GEOM_LABEL: Label for provider ad0s3d is ufsid/4972878099f22d95. GEOM_LABEL: Label ufsid/49728b978f782469 removed. GEOM_LABEL: Label for provider ad0s4e is ufsid/49728b978f782469. GEOM_LABEL: Label ufsid/4972895e7ecd233a removed. GEOM_LABEL: Label ufsid/49728992a5657d36 removed. GEOM_LABEL: Label ufsid/49728b978f782469 removed. GEOM_LABEL: Label ufsid/49729d577ed6f96a removed. wlan0: bpf attached wlan0: Ethernet address: 00:05:3c:09:86:46 wlan0: bpf attached GEOM_LABEL: Label for provider md0 is ufsid/49f9984c155bf901. GEOM_LABEL: Label ufsid/49f9984c155bf901 removed. --lFRK9w0o3gensELN-- --UKsZWh/ZtaJX4ozz Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEARECAAYFAkn5wUUACgkQmprOCmdXAD3PxgCdGSAfvI1XYLjqb5VKEQkdCY/M G0QAnRWN65/Bco9l53UrXWMWpDcpTEaH =znEI -----END PGP SIGNATURE----- --UKsZWh/ZtaJX4ozz--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090430151830.GW1387>