Date: Sat, 13 Jun 2009 15:44:04 -0400 From: Alex <alex323@gmail.com> To: freebsd-mobile@freebsd.org Subject: ThinkPad X200 (7454-CTO) Message-ID: <20090613154404.1f739030@orion.lan>
next in thread | raw e-mail | index | archive | help
Hello, I recently purchased a ThinkPad X200. I am attempting to run FreeBSD 7.2-RELEASE (amd64) and have had some success. I have sound working from the headphone port (snd_hda), but not the speakers. Wireless is not operational, as it is not detected at all by the kernel. X works fine using the intel video driver. Below is the output from dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE-p1 #2: Sat Jun 13 12:51:19 EDT 2009 root@orion:/usr/obj/usr/src/sys/ORION Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (2394.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 usable memory = 3148926976 (3003 MB) avail memory = 3038056448 (2897 MB) ACPI APIC Table: <LENOVO TP-6D > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <LENOVO TP-6D> on motherboard acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bef00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: detected 32764k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xf2400000-0xf24fffff at device 2.1 on pci0 pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <Intel ATA controller> port 0x1828-0x182f,0x180c-0x180f,0x1820-0x1827,0x1808-0x180b,0x1810-0x181f irq 18 at device 3.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <simple comms, UART> at device 3.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x1840-0x185f mem 0xf2600000-0xf261ffff,0xf2625000-0xf2625fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1f:16:1e:bf:09 uhci0: <UHCI (generic) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf2826c00-0xf2826fff irq 23 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered ugen0: <Chicony Electronics Co., Ltd. product 0x480c, class 239/2, rev 2.00/31.34, addr 2> on uhub3 hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf2620000-0xf2623fff irq 17 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090329_0131 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 pci3: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib3 uhci3: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf2827000-0xf28273ff irq 19 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered pcib4: <PCI-PCI bridge> at device 30.0 on pci0 pci13: <PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel AHCI controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xf2826000-0xf28267ff irq 16 at device 31.2 on pci0 atapci1: [ITHREAD] atapci1: AHCI Version 01.20 controller with 4 ports detected ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] ata6: <ATA channel 2> on atapci1 ata6: port not implemented ata6: [ITHREAD] ata7: <ATA channel 3> on atapci1 ata7: port not implemented ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003405080 [20070320] ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU0._OSC] (Node 0xffffff0001428c80), AE_AML_INTERNAL est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0003408800 [20070320] ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320] ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xffffff0001428ba0), AE_AML_INTERNAL est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad8: 152627MB <HITACHI HTS723216L9SA60 FC2ZC50B> at ata4-master SATA150 hdac0: HDA Codec #0: Conexant CX20561 (Hermosa) pcm0: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 0 nid 1 on hdac0 SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider ad8s2 is ufsid/4a3170a4a1588784. GEOM_LABEL: Label for provider ad8s1a is ufsid/4a3170a412bd0989. GEOM_LABEL: Label for provider ad8s1d is ufsid/4a3170ac73ed9a67. GEOM_LABEL: Label for provider ad8s1e is ufsid/4a3170a6f42ca34b. GEOM_LABEL: Label for provider ad8s1f is ufsid/4a3170a6b8af46dc. Trying to mount root from ufs:/dev/ad8s1a GEOM_LABEL: Label ufsid/4a3170a412bd0989 removed. GEOM_LABEL: Label for provider ad8s1a is ufsid/4a3170a412bd0989. GEOM_LABEL: Label ufsid/4a3170a4a1588784 removed. GEOM_LABEL: Label for provider ad8s2 is ufsid/4a3170a4a1588784. GEOM_LABEL: Label ufsid/4a3170a6f42ca34b removed. GEOM_LABEL: Label for provider ad8s1e is ufsid/4a3170a6f42ca34b. GEOM_LABEL: Label ufsid/4a3170a6b8af46dc removed. GEOM_LABEL: Label for provider ad8s1f is ufsid/4a3170a6b8af46dc. GEOM_LABEL: Label ufsid/4a3170ac73ed9a67 removed. GEOM_LABEL: Label for provider ad8s1d is ufsid/4a3170ac73ed9a67. GEOM_LABEL: Label ufsid/4a3170a412bd0989 removed. GEOM_LABEL: Label ufsid/4a3170a4a1588784 removed. GEOM_LABEL: Label ufsid/4a3170a6f42ca34b removed. GEOM_LABEL: Label ufsid/4a3170a6b8af46dc removed. GEOM_LABEL: Label ufsid/4a3170ac73ed9a67 removed. drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 drm0: [ITHREAD] I purchased the laptop with the following wireless card: 44C8733I SBB THINKPAD B/G/N 44C5194I SBB INTEGRWIRELESSWIDEAREANETW This appears to be a RTL8192SE. I found a page from realtek describing it: http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&ProdID=230 I tried downloading the Windows XP and Vista drivers from Lenovo and was able to get them compiled using ndisgen. However when I attempted to load them (seperately) into the kernel nothing happens. There is no output from dmesg and no new devices in the output of ifconfig -a. The following is the output from lshal regarding this device: udi = '/org/freedesktop/Hal/devices/pci_10ec_8172' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2942' (string) info.subsystem = 'pci' (string) info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8172' (string) info.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.device_class = 2 (0x2) (int) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 128 (0x80) (int) pci.freebsd.bus = 3 (0x3) (int) pci.freebsd.device = 0 (0x0) (int) pci.freebsd.function = 0 (0x0) (int) pci.freebsd.secondary_bus = 0 (0x0) (int) pci.product_id = 33138 (0x8172) (int) pci.subsys_product_id = 57376 (0xe020) (int) pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.subsys_vendor_id = 4332 (0x10ec) (int) pci.vendor = 'Realtek Semiconductor Co., Ltd.' (string) pci.vendor_id = 4332 (0x10ec) (int) uname -a follows: FreeBSD orion 7.2-RELEASE-p1 FreeBSD 7.2-RELEASE-p1 #2: Sat Jun 13 12:51:19 EDT 2009 root@orion:/usr/obj/usr/src/sys/ORION amd64 Does anyone know why the wireless card is not appearing, even though the drivers successfully compile? -- Alex
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090613154404.1f739030>