Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Jul 2009 19:10:38 +0200
From:      Hans Petter Selasky <hselasky@c2i.net>
To:        Michael Gmelin <freebsdusb@bindone.de>
Cc:        freebsd-usb@freebsd.org
Subject:   Re: [usb2] Garmin Edge 705 disconnects immediately
Message-ID:  <200907221910.40562.hselasky@c2i.net>
In-Reply-To: <4A67379D.3030601@bindone.de>
References:  <4A62187E.1000506@bindone.de> <200907221629.58612.hselasky@c2i.net> <4A67379D.3030601@bindone.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 22 July 2009 18:00:29 Michael Gmelin wrote:
> Hans Petter Selasky wrote:
> > On Wednesday 22 July 2009 15:55:36 Michael Gmelin wrote:
> >> Hans Petter Selasky wrote:
> >>
> >> Did you have a chance to look at this yet? Anything more I could do?
> >> Thanks!
> >
> > Hi,
> >
> > Can you try the attached patch. Needs to be applied by hand.
> >
> > Then compile new kernel, reboot.
> >
> > kldload usb_quirk
> >
> > usbconfig -u xxx -a uuu  add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev>
> > UQ_CFG_PRESET
> >
> > You need to fill in the correct vendor id, product id, lo rev and hi rev
> > for your device. See the dump_device_desc output for your device.
> >
> > --HPS
>
> Hello,
>
> I merged in the changes to make that quirk work (couldnt use the patches
> directly because I'm on another version). Unfortunately dump_device_desc
> doesn't work, because the device disappears before I can get the info
> (but I have it anyway, so this is no issue).
>
> kldload usb2_controller_uhci
> kldload usb2_storage_mass
> kldload usb2_quirk
> usbconfig add_dev_quirk_vplh 0x091e 0x2271 0x0000 0xffff UQ_CFG_PRESET
> (also tried specifying -u and -a)
>
> According to the logs it's still setting config index 0 in
> usb2_alloc_device (but this config misleading debug ouput I guess,
> because it calls the patched function later in there). The debug output
> suggests that the patch is actually working, but the result is the same
>

Can you redo test with umass unloaded?

--HPS




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200907221910.40562.hselasky>