Date: Tue, 1 Sep 2009 22:50:47 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-current@freebsd.org Cc: Stefan Bethke <stb@lassitu.de> Subject: Re: Elsa MicroLink 56k USB is not picked up by umodem Message-ID: <200909012250.48439.hselasky@c2i.net> In-Reply-To: <15577E21-9A9B-45CA-BC56-D1AB1FF6A5A9@lassitu.de> References: <15577E21-9A9B-45CA-BC56-D1AB1FF6A5A9@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tuesday 01 September 2009 22:45:15 Stefan Bethke wrote: > Just dug out my sturdy old Elsa modem, and the new USB stack does not > recognize it anymore. Is that intentional, or did the device IDs just > dropped between the cracks on the conversion to the new USB stack? > > > # dmesg > ... > ugen0.3: <vendor 0x05cc> at usbus0 > # usbconfig list > ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL > (12Mbps) pwr=ON > ugen1.1: <EHCI root HUB (0x15ad)> at usbus1, cfg=0 md=HOST spd=HIGH > (480Mbps) pwr=ON > ugen0.2: <product 0x0002 vendor 0x0e0f> at usbus0, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=SAVE > ugen0.3: <product 0x2265 vendor 0x05cc> at usbus0, cfg=0 md=HOST > spd=FULL (12Mbps) pwr=ON > > > 7-stable sees this: > # usbdevs -v > Controller /dev/usb0: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x0000), rev 1.00 > port 1 addr 3: full speed, power 400 mA, config 2, ELSA Modem > Board(0x2265), Lucent Technologies, Inc.(0x05cc), rev 1.00 > ... > # dmesg > ... > ucom0: <Lucent Technologies, Inc. ELSA Modem Board, class 2/0, rev > 1.00/1.00, addr 3> on uhub0 > ucom0: iclass 2/2 > ucom0: data interface 1, has CM over data, has break > ucom0: status change notification available > > > Stefan Did you load umodem ?? kldstat ? Also check if your modem has multiple configurations. Maybe you have to set a configuration different from config index = 0. usbconfig -u XXX -a YYY set_config 1 --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909012250.48439.hselasky>