Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Dec 2009 00:38:11 +0100
From:      Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
To:        freebsd-stable@freebsd.org
Subject:   Re: Why does FreeBSD 8.-0 think that my Dell SX260 have "non-unform processors"?
Message-ID:  <20091223003811.cb63c28f.torfinn.ingolfsen@broadpark.no>
In-Reply-To: <20091221145238.P28370@sola.nimnet.asn.au>
References:  <20091220215943.5c6cbdcb.torfinn.ingolfsen@broadpark.no> <20091221145238.P28370@sola.nimnet.asn.au>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 21 Dec 2009 15:29:54 +1100 (EST)
Ian Smith <smithi@nimnet.asn.au> wrote:

> Why is it booting up at half speed?  Same in your 7.2-STABLE dmesg.

I don't know.  Since last time, I've upgraded the bios to the latest
(A03) and reset bios to default values - but the problem is still there.
According to the specs, a SX260 supports all Pentium 4 cpus with 400
MHz and 533 MHz FSB (front side bus).

> Something set that way in BIOS?  What does 'sysctl dev.cpu' say?

The only setting in bios related to cpu speed are
"normal" and "comaptible". I've tried both - doesn't make a difference.

Now sysctl.dev.cpu says:
root@kg-work2# sysctl dev.cpu
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.freq: 1295
dev.cpu.0.freq_levels: 1295/-1 1133/-1 971/-1 809/-1 647/-1 485/-1 323/-1
dev.cpu.0.cx_supported: C1/0
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00% last 500us
dev.cpu.1.%desc: ACPI CPU
dev.cpu.1.%driver: cpu
dev.cpu.1.%location: handle=\_PR_.CPU1
dev.cpu.1.%pnpinfo: _HID=none _UID=0
dev.cpu.1.%parent: acpi0
dev.cpu.1.cx_supported: C1/0
dev.cpu.1.cx_lowest: C1
dev.cpu.1.cx_usage: 100.00% last 500us

> 
> Only spotted a verbose dmesg for 7.2-STABLE there, not for 8.0?

Not, I didn't make one that evening. There is one over ther now. :-)

> I suppose you have HTT disabled in BIOS?

Yes, I had, it is enabled now.
-- 
Regards,
Torfinn Ingolfsen




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091223003811.cb63c28f.torfinn.ingolfsen>