Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 21 Jan 2010 20:11:27 +0100 (CET)
From:      Oliver Fromme <olli@lurza.secnetix.de>
To:        freebsd-net@FreeBSD.ORG, pyunyh@gmail.com, davidch@broadcom.com
Subject:   Re: kern/134658: [bce] bce driver fails on PowerEdge m610  blade.
Message-ID:  <201001211911.o0LJBRUP085902@lurza.secnetix.de>
In-Reply-To: <5D267A3F22FD854F8F48B3D2B52381933A537E281A@IRVEXCHCCR01.corp.ad.broadcom.com>

next in thread | previous in thread | raw e-mail | index | archive | help
David Christensen wrote:
 > Oliver Fromme wrote:
 > > While trying to debug the same issue I stumbled across this 
 > > thread ...  We've got HS22 blades (IBM BladeCenter) which 
 > > habe the BCM5709S and suffer from exactly the same problem.
 > > 
 > > Dave, are there any news regarding the PHY implementation?
 > > 
 > > If there's decent documentation I might even give it a try 
 > > myself, provided that it's not too complex.  (I've done 
 > > hardware programming before, but I've never touched a NIC/PHY 
 > > driver, except for very trivial fixes.)
 > > 
 > 
 > Pyunh has taken an active interest in this effort and sent out
 > a patch yesterday, though he doesn't have hardware to test.  I'm
 > planning on giving his patch a try today to see how close he got
 > on his first attempt.

Thank you very much to both of you!

With that patch applied, the 5709S PHY is correctly attached
by brgphy and "seems to work".  I can't test it thoroughly
right now, though, because there is no cable attached to the
port ...  The machine is located in a customer's datacenter
in a different city and I'll have to ask someone to connect
the ports.  This is a little bit complicated in that company.  :-)

I will continue testing as soon as there's a physical link.
For now, this is what ifconfig says (bce0 only; bce1 is the
same):

 bce0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
 	options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
 	capabilities=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
 	ether 00:21:5e:98:f6:6c
 	media: Ethernet autoselect (autoselect <half-duplex>)
 	status: no carrier
 	supported media:
 		media autoselect
 		media 1000baseSX mediaopt full-duplex
 		media none

Here's an excerpt from dmesg (verbose boot):

 bce0: <Broadcom NetXtreme II BCM5709 1000Base-SX (C0)> mem 0x92000000-0x93ffffff irq 30 at device 0.0 on pci16
 bce0: attempting to allocate 1 MSI vectors (16 supported)
 msi: routing MSI IRQ 260 to local APIC 0 vector 112
 bce0: using IRQ 260 for MSI
 miibus2: <MII bus> on bce0
 brgphy2: <BCM5709S 1000/2500baseSX PHY> PHY 2 on miibus2
 brgphy2: OUI 0x0050ef, model 0x003f, rev. 0
 brgphy2:  1000baseSX-FDX, auto
 bce0: bpf attached
 bce0: Ethernet address: 00:21:5e:98:f6:6c
 bce0: [MPSAFE]
 bce0: [ITHREAD]
 bce0: ASIC (0x57092000); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.0.6); Flags (MSI|MFW); MFW (NCSI 2.0.3)

And relevant parts from devinfo -rv:

 pcib6 pnpinfo vendor=0x8086 device=0x340e subvendor=0x1014 subdevice=0x340e class=0x060400 at slot=7 function=0 handle=\_SB_.PCI0.ETH1
   pci16
     bce0 pnpinfo vendor=0x14e4 device=0x163a subvendor=0x1014 subdevice=0x0370 class=0x020000 at slot=0 function=0
         Interrupt request lines:
             260
         I/O memory addresses:
             0x92000000-0x93ffffff
       miibus2
         brgphy2 pnpinfo oui=0x50ef model=0x3f rev=0x0 at phyno=2

Finally pciconf -lcv:

 bce0@pci0:16:0:0:	class=0x020000 card=0x03701014 chip=0x163a14e4 rev=0x20 hdr=0x00
     vendor     = 'Broadcom Corporation'
     device     = 'NetXtreme II BCM5709S Gigabit Ethernet'
     class      = network
     subclass   = ethernet
     cap 01[48] = powerspec 3  supports D0 D3  current D0
     cap 03[50] = VPD
     cap 05[58] = MSI supports 16 messages, 64 bit enabled with 1 message
     cap 11[a0] = MSI-X supports 9 messages in map 0x10
     cap 10[ac] = PCI-Express 2 endpoint max data 256(512) link x4(x4)

The complete files (dmesg etc.) can be found here:

http://www.secnetix.de/olli/dmesg/hs22/

Best regards
   Oliver

-- 
Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606,  Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758,  Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart

FreeBSD-Dienstleistungen, -Produkte und mehr:  http://www.secnetix.de/bsd

"IRIX is about as stable as a one-legged drunk with hypothermia
in a four-hundred mile per hour wind, balancing on a banana
peel on a greased cookie sheet -- when someone throws him an
elephant with bad breath and a worse temper."
        -- Ralf Hildebrandt



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001211911.o0LJBRUP085902>