Date: Mon, 15 Feb 2010 22:37:10 +0900 (JST) From: UEMURA Tetsuya <t_uemura@macome.co.jp> To: freebsd-usb@freebsd.org Subject: Re: FT4232H on ehci problem (was Re: usb/143832: [uftdi] Request support for FTDI FT4232H.) Message-ID: <20100215133711.01CBE40AF@towerrecords.dyndns.org> In-Reply-To: <20100212093559.2732B408B@towerrecords.dyndns.org> References: <201002120944.16076.hselasky@c2i.net> <20100212093559.2732B408B@towerrecords.dyndns.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] > Now I have a problem with the device. When it is attached on ehci, it > always stalls when I do a bit heavy communication over it. This doesn't > happen with uhci (kldunload ehci or whatever). I did further investigation myself and found that wMaxPacketSize is 0x0200 when the device was on ehci (0x0040 on uhci), and the device seemed to work (at least not stall) on ehci if I changed UFTDI_[IO]BUFSIZE to 512. The device however stopped working on uhci with such a modification. By the way, the official FTDI Linux driver found at http://www.ftdichip.com/Drivers/VCP/Linux/ftdi_sio.tar.gz also seemed to specify 512 as its buffer sizes. Can anyone help me? Regards. -- UEMURA Tetsuya <t_uemura@macome.co.jp> [-- Attachment #2 --] root@dx7500:/home/uemura# usbconfig ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen6.1: <EHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2: <product 0x7000 vendor 0x0557> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen4.3: <USB Keyboard CHESEN> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen7.2: <product 0x2514 vendor 0x0424> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen7.3: <Quad RS232-HS FTDI> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen7.4: <Quad RS232-HS FTDI> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen7.5: <Quad RS232-HS FTDI> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen7.6: <Quad RS232-HS FTDI> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON root@dx7500:/home/uemura# usbconfig -d 7.6 dump_curr_config_desc ugen7.6: <Quad RS232-HS FTDI> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0065 bNumInterfaces = 0x0004 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x0080 bMaxPower = 0x00fa Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0004 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <retrieving string failed> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0085 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0006 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0087 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0008 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 [-- Attachment #3 --] root@dx7500:/home/uemura# kldunload ehci root@dx7500:/home/uemura# usbconfig ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.2: <product 0x7000 vendor 0x0557> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen4.3: <USB Keyboard CHESEN> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen4.4: <product 0x2514 vendor 0x0424> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen4.5: <Quad RS232-HS FTDI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.6: <Quad RS232-HS FTDI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.7: <Quad RS232-HS FTDI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.8: <Quad RS232-HS FTDI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON root@dx7500:/home/uemura# usbconfig -d 4.8 dump_curr_config_desc ugen4.8: <Quad RS232-HS FTDI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0065 bNumInterfaces = 0x0004 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x0080 bMaxPower = 0x00fa Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0004 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0002 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0085 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0006 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0003 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00ff bInterfaceSubClass = 0x00ff bInterfaceProtocol = 0x00ff iInterface = 0x0002 <Quad RS232-HS> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0087 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0008 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100215133711.01CBE40AF>