Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 15 Mar 2010 20:50:49 +0100 (CET)
From:      Juergen Lock <nox@jelal.kn-bremen.de>
To:        scdbackup@gmx.net
Cc:        freebsd-hackers@freebsd.org, mav@freebsd.org
Subject:   Re: How to slow down SATA to 1.5 GBit/s ?
Message-ID:  <201003151950.o2FJonYP003759@triton8.kn-bremen.de>
In-Reply-To: <106085798526913@192.168.2.69>
References:  <201003141600.o2EG0F2M005027@triton8.kn-bremen.de>

next in thread | previous in thread | raw e-mail | index | archive | help
In article <106085798526913@192.168.2.69> you write:
>Hi,
Hi!
>
>the switch to ahci was successful and it looks
>quite good, overall.
>
>But probably i found a bug. I could need advise
>where and how to submit it.
>
>A particular sequence of SCSI commands leads to
>an elsewise harmless stall of the dialog between
>libburn and drive.
>To close and re-open the libcam connection before
>this sequence is enough to circumvent the
>problem. But this remedy is not desirable. 
>
>Long story:
>------------------------------------------------
>
>I did the switch to ahci. Now my disk is
>ada and my eSATA attached burner is not acd1|cd1
>but only cd0.
>
>The IDE ROM works fine with the vanilla
>configuration. It obviously staid under ata
>control as acd0|cd1.
>
>With the poor eSATA connection at 3000 GBit/s
>i still get the stalls. But after killing the
>writing process and about 4 minutes of waiting
>i get my drive back in most cases.
>Sometimes i have to do a power cycle on the drive
>to get it back as /dev/cd0.
>Still no reboot or panic. I begin to like ahci.
>(I find no trace of power cycle or re-plugging
> in dmesg.)
>
 Ah thats good! :)  You could try booting with verbose logging (I think
thats option 5. in the beastie menu that comes up at boot), maybe then
you will see something.
>
>The speed setter in camcontrol seems not to work.
>Writing still gets stuck after a few MB.
>
 Is this on 8.0 release or on stable/8 or head?  As I said maybe that
part of the code wasn't in 8.0 yet...

>So i used the boot time option.
>dmesg tells:
>  cd0 at ahcich4 bus 0 target 0 lun 0
>  cd0: <TSSTcorp CDDVDW SH-S223B SB02> Removable CD-ROM SCSI-0 device 
>  cd0: 300.000MB/s transfers
>
>I added to /boot/device.hints :
>  hint.ahcich.4.sata_rev="1"
>
>After reboot, i see in dmesg:
>  cd0 at ahcich4 bus 0 target 0 lun 0
>  cd0: <TSSTcorp CDDVDW SH-S223B SB02> Removable CD-ROM SCSI-0 device 
>  cd0: 150.000MB/s transfers
>
>Now everything seems to work - except libburn.
>Grrr.
>
>
>Writing looks good. But it does not end.
>It is stuck in
>  READ DISC INFORMATION
>  51 00 00 00 00 00 00 00 22 00 
>and waits for the reply of the drive.
>This happens when the new media state shall be
>inquired after burning was completed.
>
>If i do
>  cam_close_device()
>and re-open the drive, then the same command
>sequence succeeds.
>(But this is a very undesirable gesture at that
> point of processing.)
>
>The problem does not appear with USB (and did
>not while the drive was built-in at SATA).
>The drive is surely not to blame.
>
>So now i could need advise about filing a bug
>report.
>
 I have Cc'd mav@ who afaik did most of the ahci(4) work, let's see what
he has to say and if he wants you to file a PR...

>------------------------------------------------
>
>Have a nice day :)
>
>Thomas

 Ditto! :)
	Juergen



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201003151950.o2FJonYP003759>