Date: Mon, 17 May 2010 19:59:23 +0200 From: Holm Tiffe <holm@freibergnet.de> To: Matthew Jacob <mj@feral.com> Cc: freebsd-scsi@freebsd.org Subject: Re: Problems with DLT on 8-Stable Message-ID: <20100517175923.GA96425@pegasus.freiberg-net.de> In-Reply-To: <4BF16C62.6010104@feral.com> References: <20100517150513.GA93298@pegasus.freiberg-net.de> <4BF16C62.6010104@feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Matthew Jacob wrote:
> How about some more information, like anything noted in /var/log/messages?
> >No, it's not he tape, nor the DLT.
> >
> >Has anyone seen this? How can I fix this?
> >
> >Kind Regards,
> >
> >Holm
> >
You can get what you ever want, but there is no message in
/var/log/messages regarding this.
The OS is from yesterday afternoon, booting with the tape loaded from the
test before is generating this single line in /var/log/messages:
May 17 09:29:20 unicorn kernel: (sa1:ahc0:0:6:0): 65536-byte tape record
bigger than supplied buffer
Here comes the dmesg.boot:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #7: Mon May 17 08:56:03 CEST 2010
holm@unicorn.tsht.lan:/data/FreeBSD/obj/data/FreeBSD/src/sys/UNICORN
i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 3000+ (2109.49-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Family = 6 Model = a Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow!+,3DNow!>
real memory = 2147483648 (2048 MB)
avail memory = 2092113920 (1995 MB)
kbd1 at kbdmux0
acpi0: <GBT AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> on hostb0
agp0: aperture size is 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem
0xd8000000-0xdfffffff,0xe9000000-0xe900ffff irq 15 at device 0.0 on pci1
drm0: <ATI Radeon RV280 9250> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 128MB
info: [drm] Initialized radeon 1.31.0 20080613
vgapci1: <VGA-compatible display> mem
0xe0000000-0xe7ffffff,0xe9010000-0xe901ffff at device 0.1 on pci1
de0: <Digital 21040 Ethernet> port 0xa000-0xa07f mem 0xeb003000-0xeb00307f
irq 15 at device 9.0 on pci0
de0: Cogent 21040 [10Mb/s] pass 2.3
de0: WARNING: using obsoleted if_watchdog interface
de0: Ethernet address: 00:00:92:90:09:8d
de0: [ITHREAD]
puc0: <Oxford Semiconductor OX16PCI952 UARTs> port
0xa400-0xa407,0xa800-0xa807,0xac00-0xac1f mem
0xeb000000-0xeb000fff,0xeb001000-0xeb001fff irq 5 at device 10.0 on pci0
puc0: [FILTER]
uart2: <16550 or compatible> on puc0
uart2: [FILTER]
uart3: <16550 or compatible> on puc0
uart3: [FILTER]
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb000-0xb0ff mem
0xeb002000-0xeb002fff irq 11 at device 11.0 on pci0
ahc0: [ITHREAD]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
amd0: <Tekram DC390(T)/AMD53c974 SCSI Host Adapter> port 0xb400-0xb47f irq
15 at device 13.0 on pci0
amd0: [GIANT-LOCKED]
amd0: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 15 at device 16.0
on pci0
uhci0: [ITHREAD]
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 15 at device 16.1
on pci0
uhci1: [ITHREAD]
usbus1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 5 at device 16.2
on pci0
uhci2: [ITHREAD]
usbus2: <VIA 83C572 USB controller> on uhci2
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xeb004000-0xeb0040ff irq 11 at
device 16.3 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <VIA VT6202 USB 2.0 controller> on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc400-0xc40f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <VIA VT8235> port 0xc800-0xc8ff irq 5 at device 17.5 on pci0
pcm0: [ITHREAD]
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem
0xeb005000-0xeb0050ff irq 5 at device 19.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0d:61:c3:c4:5a
rl0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2109486622 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA> at usbus3
uhub3: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
(probe6:ahc0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe6:ahc0:0:6:0): CAM status: SCSI Status Error
(probe6:ahc0:0:6:0): SCSI status: Check Condition
(probe6:ahc0:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
or bus device reset occurred)
(probe5:ahc0:0:5:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe5:ahc0:0:5:0): CAM status: SCSI Status Error
(probe5:ahc0:0:5:0): SCSI status: Check Condition
(probe5:ahc0:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset,
or bus device reset occurred)
(probe5:ahc0:0:5:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe5:ahc0:0:5:0): CAM status: SCSI Status Error
(probe5:ahc0:0:5:0): SCSI status: Check Condition
(probe5:ahc0:0:5:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
sa0 at ahc0 bus 0 scbus0 target 5 lun 0
sa0: <TANDBERG SLR5 4/8GB =09:> Removable Sequential Access SCSI-2 device
sa0: 3.300MB/s transfers
sa1 at ahc0 bus 0 scbus0 target 6 lun 0
sa1: <Quantum DLT4000 CC28> Removable Sequential Access SCSI-CCS device
sa1: 3.300MB/s transfers
da0 at ahc0 bus 0 scbus0 target 0 lun 0
da0: <IBM-SSG S53D073 C61E> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da0: Command Queueing enabled
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da1 at ahc0 bus 0 scbus0 target 1 lun 0
da1: <IBM-SSG S53D073 C61E> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da1: Command Queueing enabled
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da2 at ahc0 bus 0 scbus0 target 2 lun 0
da2: <IBM-SSG S53D073 C61A> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da2: Command Queueing enabled
da2: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da3 at ahc0 bus 0 scbus0 target 3 lun 0
da3: <IBM-SSG S53D073 C61A> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
da3: Command Queueing enabled
da3: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
GEOM_CONCAT: Device gc0d created (id=2065581164).
GEOM_CONCAT: Disk da0d attached to gc0d.
GEOM_CONCAT: Device data created (id=2038144655).
GEOM_CONCAT: Disk da0g attached to data.
GEOM_MIRROR: Device mirror/gm0a launched (2/2).
GEOM_CONCAT: Disk da1d attached to gc0d.
GEOM_CONCAT: Device gc0d activated.
GEOM_MIRROR: Device mirror/gm0e launched (2/2).
GEOM_MIRROR: Device mirror/gm0f launched (2/2).
GEOM_CONCAT: Disk da1g attached to data.
GEOM_CONCAT: Disk da2a attached to data.
GEOM_CONCAT: Disk da2b attached to data.
GEOM_CONCAT: Device data activated.
Trying to mount root from ufs:/dev/mirror/gm0a
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, info@tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100517175923.GA96425>