Date: Sun, 19 Sep 2010 01:10:27 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-usb@FreeBSD.org Subject: FreeBSD 8.1, if_cdce and an OpenMoko phone Message-ID: <20100919011027.9e457282.torfinn.ingolfsen@broadpark.no>
next in thread | raw e-mail | index | archive | help
Hi, Under FreeBSD 7.3-stable, I could connect my Neo FreeRunner (Openmoko phone) via usb cable to my workstation, kldload if_cdce and get an ethernet interface up. Now running FreeBSD 8.1-release on said workstation: root@kg-work2# uname -a FreeBSD kg-work2.kg4.no 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:55:53 UTC 2010 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 and the FreeRunner is detected like this: root@kg-work2# usbconfig ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen2.2: <RNDIS/Ethernet Gadget Linux 2.6.29-rc3-v21 with s3c2410_udc> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON and cdce(4) is already in the GENERIC kernel. From /var/log/messages: Sep 19 00:06:49 kg-work2 root: Unknown USB device: vendor 0x1457 product 0x5122 bus uhub2 Sep 19 00:06:49 kg-work2 kernel: ugen2.2: <Linux 2.6.29-rc3-v21 with s3c2410_udc> at usbus2 Sep 19 00:12:47 kg-work2 kernel: interface cdce.1 already present in the KLD 'kernel'! The problem is of course that therer isn't an ethernet interface for this usb device: root@kg-work2# ifconfig em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> ether 00:08:74:b3:5e:c8 inet 10.1.150.16 netmask 0xffff0000 broadcast 10.1.255.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 nd6 options=3<PERFORMNUD,ACCEPT_RTADV> So, what magic tricks do I need to perform to get this working under 8.1? References: 1) http://wiki.openmoko.org/wiki/Neo_FreeRunner -- Regards, Torfinn Ingolfsen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100919011027.9e457282.torfinn.ingolfsen>