Date: Wed, 16 Feb 2011 19:10:38 GMT From: Frank Scheckenbach <Frank.Scheckenbach@online.de> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/154828: Unable to create directories on external USB HDD with large msdosfs (g_vfs_done():da0s1[WRITE(offset=- ... , length=16384)]error = 5) Message-ID: <201102161910.p1GJAcm8066803@red.freebsd.org> Resent-Message-ID: <201102161920.p1GJK9Kr006303@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 154828 >Category: usb >Synopsis: Unable to create directories on external USB HDD with large msdosfs (g_vfs_done():da0s1[WRITE(offset=- ... , length=16384)]error = 5) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Feb 16 19:20:09 UTC 2011 >Closed-Date: >Last-Modified: >Originator: Frank Scheckenbach >Release: 8.2-RC3 >Organization: >Environment: FreeBSD FreeBSD.fritz.box 8.2-RC3 FreeBSD 8.2-RC3 #0: Sun Jan 30 06:28:31 UTC 2011 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 >Description: After a binary update from 8.2-RC2 to 8.2-RC3 I can no longer create directories on my external USB HDD. The filesystem is fat32 and the drive is manually mounted using "mount_msdosfs -o large". Writing, editing and deleting files is still possible. But even when I write files to the HDD, dmesg reports errors "g_vfs_done():da0s1[WRITE(offset=- ... , length=16384)]error = 5", although, the files are correctly written. It is even possible to delete directories but creating directories is impossible. The error does not occur on any fat16/fat32 USB flash disk, nor did it occur before updating to 8.2-RC3. Once the systems starts reporting these errors, it is impossible to unmount the HDD, and if I force it to unmount the HDD using "unmount -f" the systems freezes. Furthermore, these errors are reported continuously, after writing once to the HDD, and do never stop. The drive is working fine with other OSs and "fsck_msdosfs" reported a clean filesystem. ################################################# dmesg ################################################# Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RC2 #0: Wed Jan 12 17:02:35 UTC 2011 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU U2300 @ 1.20GHz (1197.01-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2012815360 (1919 MB) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <LENOVO CB-01> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel GM45 SVGA controller> on vgapci0 agp0: detected 32764k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xf0400000-0xf04fffff at device 2.1 on pci0 uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 21 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801I (ICH9) USB controller> on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801I (ICH9) USB controller> on uhci1 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0805800-0xf0805bff irq 20 at device 26.7 on pci0 ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0 hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf0800000-0xf0803fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20100226_0142 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf0904000-0xf0904fff,0xf0900000-0xf0903fff irq 16 at device 0.0 on pci2 re0: Using 1 MSI messages re0: Chip rev. 0x28000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 70:5a:b6:54:09:cb re0: [FILTER] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 pci3: <network> at device 0.0 (no driver attached) uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at device 29.0 on pci0 uhci2: [ITHREAD] usbus3: <Intel 82801I (ICH9) USB controller> on uhci2 uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 19 at device 29.1 on pci0 uhci3: [ITHREAD] usbus4: <Intel 82801I (ICH9) USB controller> on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0 uhci4: [ITHREAD] usbus5: <Intel 82801I (ICH9) USB controller> on uhci4 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0805c00-0xf0805fff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18c0-0x18df mem 0xf0805000-0xf08057ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 4> on atapci0 ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <dasp> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ad4: 238475MB <Seagate ST9250315AS 0010LVM1> at ata2-master UDMA100 SATA 1.5Gb/s ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 hdac0: HDA Codec #0: Realtek ALC272 hdac0: HDA Codec #2: Intel G45 HDMI pcm0: <HDA Realtek ALC272 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 2 nid 1 on hdac0 SMP: AP CPU #1 Launched! GEOM: ad4: partition 4 does not start on a track boundary. GEOM: ad4: partition 4 does not end on a track boundary. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus6 usbus2 Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus6 usbus2 uhub6: 6 ports with 6 removable, self powered ugen2.2: <Sonix Technology Co., Ltd.> at usbus2 Root mount waiting for: usbus6 usbus2 ugen6.2: <vendor 0x05e3> at usbus6 uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.60, addr 2> on usbus6 ugen0.2: <TouchStrip> at usbus0 uhub7: 4 ports with 4 removable, self powered ugen2.3: <vendor 0x05e3> at usbus2 uhub8: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.60, addr 3> on usbus2 Root mount waiting for: usbus6 usbus2 ugen6.3: <vendor 0x05af> at usbus6 ukbd0: <vendor 0x05af USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus6 kbd2 at ukbd0 uhub8: 4 ports with 4 removable, self powered uhid0: <vendor 0x05af USB Keyboard, class 0/0, rev 1.10/1.01, addr 3> on usbus6 Root mount waiting for: usbus6 usbus2 ugen2.4: <Formac Elektronik GmbH> at usbus2 umass0: <Interface0> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x0000 ugen6.4: <Logitech> at usbus6 ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 4> on usbus6 ums0: 8 buttons and [XYZT] coordinates ID=0 umass0:1:0:-1: Attached to scbus1 Trying to mount root from ufs:/dev/ad4s4a da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <Ext Hard Disk > Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) ugen3.2: <Broadcom Corp> at usbus3 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled re0: link state changed to UP re0: promiscuous mode enabled re0: promiscuous mode disabled re0: promiscuous mode enabled drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI enabled 1 message(s) vgapci0: child drm0 requested pci_enable_busmaster info: [drm] AGP at 0xd0000000 256MB info: [drm] Initialized i915 1.6.0 20080730 drm0: [ITHREAD] >How-To-Repeat: Simply by writing to the HDD or trying to create a directory. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201102161910.p1GJAcm8066803>