Date: Wed, 16 Mar 2011 20:44:05 +0200 From: Aleksandr Rybalko <ray@ddteam.net> To: Jan Henrik Sylvester <me@janh.de> Cc: Aleksandr Rybalko <ray@dlink.ua>, current-list freebsd <freebsd-current@freebsd.org> Subject: Re: [CFR]RT305xF support, w/o attachment Message-ID: <20110316204405.9308757d.ray@ddteam.net> In-Reply-To: <4D80EE33.7010703@janh.de> References: <20110314162936.d3f8fd5b.ray@dlink.ua> <4D80EE33.7010703@janh.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On Wed, 16 Mar 2011 18:06:59 +0100 Jan Henrik Sylvester <me@janh.de> wrote: > Hello! > > On 01/-10/-28163 20:59, Aleksandr Rybalko wrote: > > 3. RT2860 802.11n controller authors Damien Bergamini and Alexander > > Egorenkov http://my.ddteam.net/files/2011-03-14_rt2860.patch > > only modification to work with RT2872 (embedded to RT305[02] > > F) wrote by me. > > Is this supposed to work on its own bringing support for Ralink 2860 > to FreeBSD? (The one in the Asus EeePC 901/1000H according to > http://wiki.freebsd.org/AsusEee .) > > > Remaining issues: > > RT2860 support only Open(no crypto) mode for RT305[02]F > > Does this mean WPA should work for RT2860? (Just not for the chips > you added support for?) As I know this driver support WPA, but best place to read/ask about this on this thread http://forums.freebsd.org/showthread.php?t=7010 > > If this is supposed to bring RT2860 support to FreeBSD in general: > > - Should it work on amd64 and i386? > - Should it work on 8.2-RELEASE? > - Should it work as a module? > > In case this is all supposed to work: I tried to create a module on > 8.2-RELEASE/amd64 by adding a simple sys/modules/rt2860/Makefile (as > I did not want to modify my stock 8.2-RELEASE kernel). I only got to: > > In file included from > /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860.c:19: > @/dev/rt2860/rt2860_softc.h:52:24: error: opt_rt2860.h: No such file > or directory > > I do not find opt_rt2860.h anywhere in your patches. Assuming it was > optional, I have commented it out only to get to: > > cc1: warnings being treated as errors > /usr/src/sys/modules/rt2860/../../dev/rt2860/rt2860_pci.c:63: > warning: 'rt2860_pci_detach' declared 'static' but never defined > > Probably, I am doing something unsupported here (especially as there > is no if_rt2860_pci.c, which I would expect). No, it's me. Too much data, so I a little confused here. Patch targeting to start support RT3052F/RT3050F System on Chip. Which main part for embedded systems like routers, AP etc. To get it compiled need remove 'rt2860_pci_detach' declaration, because pci and obio interfaces have same detach device methods (rt2860_detach in rt2860.c) And opt_rt2860.h must be defined in sys/conf/options <code> # options for the Ralink RT286x driver (rt2860) RT2860_DEBUG opt_rt2860.h </code> > > Cheers, > Jan Henrik I will remake patch tomorrow. Thanks for your report and questions? -- Aleksandr Rybalko <ray@ddteam.net>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110316204405.9308757d.ray>