Date: Wed, 31 Oct 2012 16:47:37 +0900 From: YongHyeon PYUN <pyunyh@gmail.com> To: Tom Judge <tj@freebsd.org> Cc: FreeBSD Net <freebsd-net@freebsd.org> Subject: Re: bxe + if_lagg Message-ID: <20121031074737.GB1471@michelle.cdnetworks.com> In-Reply-To: <508FF0F9.9020105@freebsd.org> References: <508FF0F9.9020105@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--s2ZSL+KKDSLx8OML Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Oct 30, 2012 at 11:23:37AM -0400, Tom Judge wrote: [...] > I am trying to get if_lagg working in an HP blade for failover between > the 2 in chassis cisco switches, but it would seem that the link state > is not being propagated up to the lagg device. > > Any hints/ideas? > > > > dmesg: > bxe1: <Broadcom NetXtreme II BCM57711E 10GbE (A0) BXE v:1.5.52 > bxe1: Ethernet address: 00:25:b3:a8:76:e4 > bxe1: ASIC (0x16500000); Rev (A0); Bus (PCIe x4, 5Gbps); Flags > (MSI-X); Queues (RSS:16); BD's (RX:510,TX:255); Firmware (5.2.13); > Bootcode (4.8.0) > Try attached patch and let me know whether it makes any difference. --s2ZSL+KKDSLx8OML Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="bxe.linkstate.diff" Index: sys/dev/bxe/if_bxe.c =================================================================== --- sys/dev/bxe/if_bxe.c (revision 242340) +++ sys/dev/bxe/if_bxe.c (working copy) @@ -2138,8 +2138,10 @@ bxe_attach(device_t dev) ifp->if_init = bxe_init; ifp->if_hwassist = BXE_IF_HWASSIST; ifp->if_capabilities = BXE_IF_CAPABILITIES; + ifp->if_capabilities |= IFCAP_LINKSTATE; /* TPA not enabled by default. */ ifp->if_capenable = BXE_IF_CAPABILITIES & ~IFCAP_LRO; + ifp->if_capenable |= IFCAP_LINKSTATE; if_initbaudrate(ifp, IF_Gbps(10)); ifp->if_snd.ifq_drv_maxlen = sc->tx_ring_size; --s2ZSL+KKDSLx8OML--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20121031074737.GB1471>