Date: Fri, 1 Feb 2013 08:32:13 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: john smith <hoselang@gmail.com> Subject: Re: sata to usb not working Message-ID: <201302010832.13117.hselasky@c2i.net> In-Reply-To: <CAKEV_woEn4M9jq%2B6CDJPnCR6mEehUzfcYeQ26mXzqRg6YKO31Q@mail.gmail.com> References: <CAKEV_woEn4M9jq%2B6CDJPnCR6mEehUzfcYeQ26mXzqRg6YKO31Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 01 February 2013 08:24:02 john smith wrote: > Hello, > I bought two cheap sata to usb adapters (one with enclosure and one > without, one of them is self powerd, so that's not the problem), and > both give me the messages below. Tried with 8.2 and 9.1 to which I'm > migrating. I have another portable hard-disk which works just fine, so > it's probably the new ones I bought that are not supported or > something (all three are usb 3). I'm not a developer. Thanks in > advance. > > kernel: usb_alloc_device: set address 2 failed (USB_ERR_STALLED, ignored) > kernel: usbd_setup_device_desc: getting device descriptor at addr 2 > failed, USB_ERR_STALLED > kernel: usbd_req_re_enumerate: addr=2, set address failed! > (USB_ERR_STALLED, ignored) > kernel: usbd_setup_device_desc: getting device descriptor at addr 2 > failed, USB_ERR_STALLED > kernel: usbd_req_re_enumerate: addr=2, set address failed! > (USB_ERR_STALLED, ignored) > kernel: usbd_setup_device_desc: getting device descriptor at addr 2 > failed, USB_ERR_STALLED > kernel: ugen4.2: <Unknown> at usbus4 (disconnected) > kernel: uhub_reattach_port: could not allocate new device > Hi, Can you upgrade the kernel to -stable, and then tune some of these sysctls up until it works? hw.usb.timings.extra_power_up_time: 20 hw.usb.timings.resume_recovery: 50 hw.usb.timings.resume_wait: 50 hw.usb.timings.resume_delay: 250 hw.usb.timings.set_address_settle: 10 hw.usb.timings.port_resume_delay: 40 hw.usb.timings.port_powerup_delay: 300 hw.usb.timings.port_reset_recovery: 250 hw.usb.timings.port_root_reset_delay: 250 hw.usb.timings.port_reset_delay: 50 --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302010832.13117.hselasky>