Date: Mon, 4 Feb 2013 19:15:51 +0100 (CET) From: Oliver Fromme <olli@lurza.secnetix.de> To: freebsd-stable@FreeBSD.ORG Subject: re(4) problems with GA-H77N-WIFI Message-ID: <201302041815.r14IFpD5007605@grabthar.secnetix.de>
next in thread | raw e-mail | index | archive | help
Hello,
I need some advice how to debug this issue ...
Recently I got a new mainboard for a router, it's a
Gigabyte GA-H77N-WIFI with two onboard re(4) NICs.
The problem is that re0 works fine and re1 doesn't:
It doesn't receive any packets. Tcpdump displays all
outgoing packets, but no incoming ones on re1.
Ifconfig shows the link correctly (100 or 1000 Mbit,
depending on where I plug the cable in).
I also swapped cables just to be sure, but it made no
difference.
I'm running a recent stable/9 (about 14 days old).
What's the best way to debug this problem? At the
moment I'm not even sure if it's the hardware, or if
it's FreeBSD's fault (or my fault) ...
Best regards
Oliver
PS: dmesg ...
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0104000-0xf0104fff,0xf0100000-0xf0103fff irq 16 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 90:2b:34:5f:bd:21
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 17 at device 0.0 on pci3
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c800000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 90:2b:34:5f:bd:11
ifconfig ...
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 90:2b:34:5f:bd:21
inet ...
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 90:2b:34:5f:bd:11
inet ...
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
--
Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing
Handelsregister: Amtsgericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsreg.: Amtsgericht München,
HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart
FreeBSD-Dienstleistungen/-Produkte + mehr: http://www.secnetix.de/bsd
"That's what I love about GUIs: They make simple tasks easier,
and complex tasks impossible."
-- John William Chambless
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201302041815.r14IFpD5007605>