Date: Fri, 25 Oct 2013 10:31:21 -0500 From: "A.G. Russell IV" <arussell@agrussell.com> To: Nathan Whitehorn <nwhitehorn@freebsd.org> Cc: freebsd-ppc@freebsd.org Subject: Re: System reboots everytime I build something, FreeBSD-9.2-RELEASE-powerpc-disc1.iso Message-ID: <20131025153121.GB15457@bifrost.agrussell.com> In-Reply-To: <5269EC48.6010306@freebsd.org> References: <20131024213126.GA15457@bifrost.agrussell.com> <CADyfeQXYAcWnBbpTuL%2BF2N=p5UqMH9%2BdHku4ouLv28q3E2nFjg@mail.gmail.com> <5269EC48.6010306@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I will put the patch on. I've included the fan rpms every 30 seconds from start of build, to reboot. A.G. On Thu, Oct 24, 2013 at 10:58:00PM -0500, Nathan Whitehorn wrote: > On 10/24/13 22:48, Julio Merino wrote: > > On Thu, Oct 24, 2013 at 4:31 PM, A.G. Russell IV <arussell@agrussell.com> wrote: > >> Oct 24 16:18:16 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 91.1 C) exceeds critical temperature (90.0 C)! Shutting down! > >> Oct 24 16:18:18 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 91.1 C) exceeds critical temperature (90.0 C)! Shutting down! > >> Oct 24 16:18:19 testother kernel: WARNING: Current temperature (CPU A1 DIODE TEMP: 92.2 C) exceeds critical temperature (90.0 C)! Shutting down! > >> > >> > >> Oct 24 16:19:38 testother kernel: cpu0: IBM PowerPC 970MP revision 1.1, 18446744071915.11 MHz > >> Oct 24 16:19:38 testother kernel: cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> > >> Oct 24 16:19:38 testother kernel: cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> > >> Oct 24 16:19:38 testother kernel: real memory = 2126057472 (2027 MB) > >> Oct 24 16:19:38 testother kernel: avail memory = 2023890944 (1930 MB) > >> Oct 24 16:19:38 testother kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > >> > >> > >> I can put this system on the Internet if that would help debug this. > >> > >> Thank you for your time, > > See PR powerpc/180593; I've seen similar issues on my PowerMac G5. The > > attached patch in that PR has fixed them for me. > > > > Thanks for the reminder and for the patch. I've just committed it to > HEAD and it should make it in to 10.0. > > The readings in the original post look stable however, and very high. > It's possible the thermal control algorithm needs some tuning for G5 > quad systems. Do you happen to know what the fans are doing? The quoted > CPU speed is also extremely suspicious here.... > -Nathan ---------------------------sysctl output---------------------------- Thu Oct 24 16:13:31 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1154 dev.smu.0.fans.backside.rpm: 1713 dev.smu.0.fans.cpu_a_intake.rpm: 786 dev.smu.0.fans.cpu_b_intake.rpm: 786 dev.smu.0.fans.cpu_a_exhaust.rpm: 799 dev.smu.0.fans.cpu_b_exhaust.rpm: 799 dev.smu.0.fans.cpu_a_pump.rpm: 1512 dev.smu.0.fans.expansion_slots_intake.rpm: 1709 Thu Oct 24 16:14:03 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1148 dev.smu.0.fans.backside.rpm: 1706 dev.smu.0.fans.cpu_a_intake.rpm: 782 dev.smu.0.fans.cpu_b_intake.rpm: 783 dev.smu.0.fans.cpu_a_exhaust.rpm: 796 dev.smu.0.fans.cpu_b_exhaust.rpm: 797 dev.smu.0.fans.cpu_a_pump.rpm: 1504 dev.smu.0.fans.expansion_slots_intake.rpm: 1703 Thu Oct 24 16:14:34 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1149 dev.smu.0.fans.backside.rpm: 1717 dev.smu.0.fans.cpu_a_intake.rpm: 783 dev.smu.0.fans.cpu_b_intake.rpm: 783 dev.smu.0.fans.cpu_a_exhaust.rpm: 796 dev.smu.0.fans.cpu_b_exhaust.rpm: 797 dev.smu.0.fans.cpu_a_pump.rpm: 1500 dev.smu.0.fans.expansion_slots_intake.rpm: 1707 Thu Oct 24 16:15:05 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1183 dev.smu.0.fans.backside.rpm: 1706 dev.smu.0.fans.cpu_a_intake.rpm: 877 dev.smu.0.fans.cpu_b_intake.rpm: 878 dev.smu.0.fans.cpu_a_exhaust.rpm: 925 dev.smu.0.fans.cpu_b_exhaust.rpm: 890 dev.smu.0.fans.cpu_a_pump.rpm: 1591 dev.smu.0.fans.expansion_slots_intake.rpm: 1740 Thu Oct 24 16:15:36 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1161 dev.smu.0.fans.backside.rpm: 1708 dev.smu.0.fans.cpu_a_intake.rpm: 795 dev.smu.0.fans.cpu_b_intake.rpm: 794 dev.smu.0.fans.cpu_a_exhaust.rpm: 806 dev.smu.0.fans.cpu_b_exhaust.rpm: 806 dev.smu.0.fans.cpu_a_pump.rpm: 1500 dev.smu.0.fans.expansion_slots_intake.rpm: 1715 Thu Oct 24 16:16:07 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1263 dev.smu.0.fans.backside.rpm: 1707 dev.smu.0.fans.cpu_a_intake.rpm: 1316 dev.smu.0.fans.cpu_b_intake.rpm: 1315 dev.smu.0.fans.cpu_a_exhaust.rpm: 1335 dev.smu.0.fans.cpu_b_exhaust.rpm: 1337 dev.smu.0.fans.cpu_a_pump.rpm: 1996 dev.smu.0.fans.expansion_slots_intake.rpm: 1822 Thu Oct 24 16:16:39 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1274 dev.smu.0.fans.backside.rpm: 1708 dev.smu.0.fans.cpu_a_intake.rpm: 1327 dev.smu.0.fans.cpu_b_intake.rpm: 1340 dev.smu.0.fans.cpu_a_exhaust.rpm: 1348 dev.smu.0.fans.cpu_b_exhaust.rpm: 1349 dev.smu.0.fans.cpu_a_pump.rpm: 2006 dev.smu.0.fans.expansion_slots_intake.rpm: 1834 Thu Oct 24 16:17:10 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1435 dev.smu.0.fans.backside.rpm: 1707 dev.smu.0.fans.cpu_a_intake.rpm: 1644 dev.smu.0.fans.cpu_b_intake.rpm: 1648 dev.smu.0.fans.cpu_a_exhaust.rpm: 1684 dev.smu.0.fans.cpu_b_exhaust.rpm: 1685 dev.smu.0.fans.cpu_a_pump.rpm: 2315 dev.smu.0.fans.expansion_slots_intake.rpm: 1992 Thu Oct 24 16:17:41 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1465 dev.smu.0.fans.backside.rpm: 1702 dev.smu.0.fans.cpu_a_intake.rpm: 2330 dev.smu.0.fans.cpu_b_intake.rpm: 2335 dev.smu.0.fans.cpu_a_exhaust.rpm: 2333 dev.smu.0.fans.cpu_b_exhaust.rpm: 2379 dev.smu.0.fans.cpu_a_pump.rpm: 2964 dev.smu.0.fans.expansion_slots_intake.rpm: 2013 Thu Oct 24 16:18:12 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1558 dev.smu.0.fans.backside.rpm: 1693 dev.smu.0.fans.cpu_a_intake.rpm: 2271 dev.smu.0.fans.cpu_b_intake.rpm: 2365 dev.smu.0.fans.cpu_a_exhaust.rpm: 2336 dev.smu.0.fans.cpu_b_exhaust.rpm: 2344 dev.smu.0.fans.cpu_a_pump.rpm: 3078 dev.smu.0.fans.expansion_slots_intake.rpm: 2180 Thu Oct 24 16:18:20 CDT 2013 dev.smu.0.fans.drive_bay_a_intake.rpm: 1816 dev.smu.0.fans.backside.rpm: 1690 dev.smu.0.fans.cpu_a_intake.rpm: 3014 dev.smu.0.fans.cpu_b_intake.rpm: 3060 dev.smu.0.fans.cpu_a_exhaust.rpm: 3034 dev.smu.0.fans.cpu_b_exhaust.rpm: 3047 dev.smu.0.fans.cpu_a_pump.rpm: 3517 dev.smu.0.fans.expansion_slots_intake.rpm: 2359 reboot... -- _______________________________________________________________________________ A.G. Russell IV KC5KFD The Knife Company e-mail: ag4@theknifecompany.com Phone 479-631-0055 FAX 479-631-8734 -------------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131025153121.GB15457>