Date: Mon, 9 Jun 2014 20:41:53 +0200 From: "A.J. 'Fonz' van Werven" <freebsd@skysmurf.nl> To: FreeBSD ports mailing list <freebsd-ports@freebsd.org> Subject: [Stagedir] x11-fonts/sgifonts pending issues Message-ID: <20140609184153.GA97049@spectrum.skysmurf.nl>
next in thread | raw e-mail | index | archive | help
--VbJkn9YxBvnuCH5J
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Attempting to stagify x11-fonts/sgifonts I'm still stuck with two issues:
-1-
No license is specified. There's no clue in the distfile and the WWW only
reveals that this port is part of a collection of things that are either
GPL or LGPL, but it doesn't specify which is which. And the authors can
only be contacted by registering and requesting a support ticket.
So, is it permissible-although-undesirable to leave LICENSE unspecified?
Or is there another recommended solution?
-2-
# portmaster x11-fonts/sgifonts
still results in pkg-message being displayed twice. So there must be
*something* I'm doing wrong, but I can't seem to figure out what. Any
advice?
The Makefile as I have it now locally follows below and I've attached a
patch for those who want it because I had to replace manual creation of
pkg-message (using ${ECHO_CMD} stuff in the Makefile) with use of
files/pkg-message.in.
Thanks in advance,
AvW
[/usr/ports/x11-fonts/sgifonts/Makefile]
# Created by: trevor
# $FreeBSD: head/x11-fonts/sgifonts/Makefile 327781 2013-09-20 23:51:14Z bapt $
PORTNAME= sgifonts
PORTVERSION= 1.0.1
PORTREVISION= 2
CATEGORIES= x11-fonts
MASTER_SITES= ftp://patches-europe.sgi.com/pub/linux/ProPack1.4/SRPMS/ \
ftp://ftp.rediris.es/sites/patches-europe.sgi.com/pub/linux/ProPack1.4/SRPMS/ \
http://www.skysmurf.nl/comp/FreeBSD/distfiles/
DISTNAME= sgi-fonts-1.0-1.src
EXTRACT_SUFX= .rpm
MAINTAINER= freebsd@skysmurf.nl
COMMENT= Fonts from the SGI ProPack 1.4 (originally for Linux)
BUILD_DEPENDS= bdftopcf:${PORTSDIR}/x11-fonts/bdftopcf \
mkfontdir:${PORTSDIR}/x11-fonts/mkfontdir
SUB_FILES= pkg-message
SUB_LIST= FONTDIR=${FONTDIR}
FONTDIR= lib/X11/fonts/local/sgi
PLIST= ${WRKDIR}/pkg-plist
PLIST_DIRS= ${FONTDIR}
USES= imake
EXTRACT_CMD= ${TAR}
EXTRACT_BEFORE_ARGS= -O -xf
EXTRACT_AFTER_ARGS= sgi-fonts.tar.gz | ${TAR} -xf -
WRKSRC= ${WRKDIR}/sgi-fonts
post-build:
@${RM} -f ${PLIST}
@cd ${WRKSRC}; \
for foo in `${LS} *gz fonts.alias fonts.dir|${SORT}`; \
do ${ECHO_CMD} ${FONTDIR}/$${foo} >> ${PLIST}; done
do-install:
${MKDIR} ${STAGEDIR}${PREFIX}/${FONTDIR}
${INSTALL_DATA} ${WRKSRC}/*gz ${STAGEDIR}${PREFIX}/${FONTDIR}
${INSTALL_DATA} ${WRKSRC}/fonts* ${STAGEDIR}${PREFIX}/${FONTDIR}
.include <bsd.port.mk>
[eof]
--
I'm not completely useless, I can be used as a bad example.
--VbJkn9YxBvnuCH5J
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment; filename="sgifonts.patch"
diff -ruN sgifonts.orig/Makefile sgifonts/Makefile
--- sgifonts.orig/Makefile 2014-06-05 13:53:10.000000000 +0200
+++ sgifonts/Makefile 2014-06-09 20:26:37.000000000 +0200
@@ -6,46 +6,37 @@
PORTREVISION= 2
CATEGORIES= x11-fonts
MASTER_SITES= ftp://patches-europe.sgi.com/pub/linux/ProPack1.4/SRPMS/ \
- ftp://ftp.rediris.es/sites/patches-europe.sgi.com/pub/linux/ProPack1.4/SRPMS/
+ ftp://ftp.rediris.es/sites/patches-europe.sgi.com/pub/linux/ProPack1.4/SRPMS/ \
+ http://www.skysmurf.nl/comp/FreeBSD/distfiles/
DISTNAME= sgi-fonts-1.0-1.src
EXTRACT_SUFX= .rpm
-MAINTAINER= ports@FreeBSD.org
+MAINTAINER= freebsd@skysmurf.nl
COMMENT= Fonts from the SGI ProPack 1.4 (originally for Linux)
BUILD_DEPENDS= bdftopcf:${PORTSDIR}/x11-fonts/bdftopcf \
mkfontdir:${PORTSDIR}/x11-fonts/mkfontdir
+SUB_FILES= pkg-message
+SUB_LIST= FONTDIR=${FONTDIR}
+FONTDIR= lib/X11/fonts/local/sgi
PLIST= ${WRKDIR}/pkg-plist
-PLIST_DIRS= lib/X11/fonts/local/sgi
-PKGMESSAGE= ${WRKDIR}/pkg-message
+PLIST_DIRS= ${FONTDIR}
USES= imake
EXTRACT_CMD= ${TAR}
EXTRACT_BEFORE_ARGS= -O -xf
EXTRACT_AFTER_ARGS= sgi-fonts.tar.gz | ${TAR} -xf -
WRKSRC= ${WRKDIR}/sgi-fonts
-NO_STAGE= yes
-pre-install:
+post-build:
@${RM} -f ${PLIST}
- @cd ${WRKSRC}; for ii in `${LS} *gz fonts.alias fonts.dir|${SORT}`; do \
- ${ECHO_CMD} lib/X11/fonts/local/sgi/$${ii} >> ${PLIST}; \
- done
- @${ECHO_CMD} "******************************************" >${PKGMESSAGE}
- @${ECHO_CMD} "Add a line" >> ${PKGMESSAGE}
- @${ECHO_CMD} "FontPath \"${PREFIX}/lib/X11/fonts/local/sgi\"" \
- >> ${PKGMESSAGE}
- @${ECHO_CMD} \
- "to your XF86Config." >> ${PKGMESSAGE}
- @${ECHO_CMD} "Then, restart the X server or do \"xset fp rehash\"."\
- >> ${PKGMESSAGE}
- @${ECHO_CMD} "*****************************************" >>${PKGMESSAGE}
+ @cd ${WRKSRC}; \
+ for foo in `${LS} *gz fonts.alias fonts.dir|${SORT}`; \
+ do ${ECHO_CMD} ${FONTDIR}/$${foo} >> ${PLIST}; done
do-install:
- ${MKDIR} ${PREFIX}/lib/X11/fonts/local/sgi
- cd ${WRKSRC}; \
- ${INSTALL_DATA} *gz fonts.alias fonts.dir \
- ${PREFIX}/lib/X11/fonts/local/sgi
- @${CAT} ${PKGMESSAGE}
+ ${MKDIR} ${STAGEDIR}${PREFIX}/${FONTDIR}
+ ${INSTALL_DATA} ${WRKSRC}/*gz ${STAGEDIR}${PREFIX}/${FONTDIR}
+ ${INSTALL_DATA} ${WRKSRC}/fonts* ${STAGEDIR}${PREFIX}/${FONTDIR}
.include <bsd.port.mk>
diff -ruN sgifonts.orig/files/pkg-message.in sgifonts/files/pkg-message.in
--- sgifonts.orig/files/pkg-message.in 1970-01-01 01:00:00.000000000 +0100
+++ sgifonts/files/pkg-message.in 2014-06-09 20:27:08.000000000 +0200
@@ -0,0 +1,5 @@
+Add the following line to the "Files" section of xorg.conf or XF86Config:
+
+ FontPath "%%PREFIX%%/%%FONTDIR%%/"
+
+Then, restart the X server or do "xset fp rehash".
--VbJkn9YxBvnuCH5J--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140609184153.GA97049>