Date: Thu, 10 Jul 2014 18:03:17 +0800 From: Kevin Lo <kevlo@FreeBSD.org> To: Carlos Jacobo Puga Medina <cpm@fbsd.es> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: TP-LINK TL-WN821N Message-ID: <20140710100317.GA16286@ns.kevlo.org> In-Reply-To: <20140710112344.86496b02b2d62197a1e467ba@fbsd.es> References: <20140707204636.50ae92cf9022cd13263932d3@fbsd.es> <CAJ-VmonuLAk4JS1yR7W%2BZB-zU=JXbhhzCBtowG6C%2BvNLZthGKQ@mail.gmail.com> <20140707211035.5ce0a482fe062bc1ea64ace7@fbsd.es> <CAJ-VmokHTSGU6a7JBAx2=m6zU%2BEmE3eyn0YQJfjkja4uHHurpw@mail.gmail.com> <20140708022220.GA87876@ns.kevlo.org> <20140708124550.c60683f2c01f3f9aa6a4ff70@fbsd.es> <20140709100229.GA6733@ns.kevlo.org> <20140709154223.9623a93c2d458dc32339b554@fbsd.es> <20140710050524.GA14437@ns.kevlo.org> <20140710112344.86496b02b2d62197a1e467ba@fbsd.es>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jul 10, 2014 at 11:23:44AM +0200, Carlos Jacobo Puga Medina wrote:
>
> On Thu, 10 Jul 2014 13:05:24 +0800
> Kevin Lo <kevlo@FreeBSD.org> wrote:
>
> > Ok, I know where the problem lies. Please try this patch, thanks.
> >
> > Index: sys/dev/usb/wlan/if_urtwn.c
> > ===================================================================
> > --- sys/dev/usb/wlan/if_urtwn.c (revision 268479)
> > +++ sys/dev/usb/wlan/if_urtwn.c (working copy)
> > @@ -2281,9 +2281,6 @@ urtwn_fw_reset(struct urtwn_softc *sc)
> > }
> > /* Force 8051 reset. */
> > urtwn_write_2(sc, R92C_SYS_FUNC_EN, reg & ~R92C_SYS_FUNC_EN_CPUEN);
> > - urtwn_write_2(sc, R92C_SYS_FUNC_EN,
> > - urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
> > - R92C_SYS_FUNC_EN_CPUEN);
> > }
> >
> > static void
> > @@ -2383,6 +2380,11 @@ urtwn_load_firmware(struct urtwn_softc *sc)
> > urtwn_write_1(sc, R92C_MCUFWDL, 0);
> > }
> >
> > + if (!(sc->chip & URTWN_CHIP_88E)) {
> > + urtwn_write_2(sc, R92C_SYS_FUNC_EN,
> > + urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
> > + R92C_SYS_FUNC_EN_CPUEN);
> > + }
> > urtwn_write_1(sc, R92C_MCUFWDL,
> > urtwn_read_1(sc, R92C_MCUFWDL) | R92C_MCUFWDL_EN);
> > urtwn_write_1(sc, R92C_MCUFWDL + 2,
> >
> > I'm just rebuilding the kernel.
>
> It works! Thanks a lot for your help :)
Excellent, glad to hear it’s working well for you.
> # ifconfig -v wlan0
> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 10:fe:ed:27:f6:5d
> inet6 fe80::12fe:edff:fe27:f65d%wlan0 prefixlen 64 scopeid 0x4
> inet 192.168.1.42 netmask 0xffffff00 broadcast 192.168.1.255
> nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
> status: associated
> ssid XXXXXXXXXX channel 11 (2462 MHz 11g) bssid f8:8e:85:c7:11:3d
> regdomain ETSI2 country ES anywhere -ecm authmode WPA -wps -tsn
> privacy ON deftxkey UNDEF
> TKIP 2:128-bit powersavemode OFF powersavesleep 100 txpower 30
> txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
> 11a ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11b ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> 11g ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> turboA ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> turboG ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> sturbo ucast NONE mgmt 6 Mb/s mcast 6 Mb/s maxretry 6
> 11na ucast NONE mgmt 12 MCS mcast 12 MCS maxretry 6
> 11ng ucast NONE mgmt 2 MCS mcast 2 MCS maxretry 6
> half ucast NONE mgmt 3 Mb/s mcast 3 Mb/s maxretry 6
> quarter ucast NONE mgmt 1 Mb/s mcast 1 Mb/s maxretry 6
> scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
> roam:11a rssi 7dBm rate 12 Mb/s
> roam:11b rssi 7dBm rate 1 Mb/s
> roam:11g rssi 7dBm rate 5 Mb/s
> roam:turboA rssi 7dBm rate 12 Mb/s
> roam:turboG rssi 7dBm rate 12 Mb/s
> roam:sturbo rssi 7dBm rate 12 Mb/s
> roam:11na rssi 7dBm MCS 1
> roam:11ng rssi 7dBm MCS 1
> roam:half rssi 7dBm rate 6 Mb/s
> roam:quarter rssi 7dBm rate 3 Mb/s
> -pureg protmode CTS -ht -htcompat -ampdu ampdulimit 64k
> ampdudensity 8 -amsdu -shortgi htprotmode RTSCTS -puren -smps -rifs
> -wme -burst -dwds roaming MANUAL bintval 100
> groups: wlan
>
> # usbconfig -u 2 -a 3 dump_device_desc
> ugen2.3: <product 0x8178 vendor 0x0bda> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
>
> bLength = 0x0012
> bDescriptorType = 0x0001
> bcdUSB = 0x0200
> bDeviceClass = 0x0000
> bDeviceSubClass = 0x0000
> bDeviceProtocol = 0x0000
> bMaxPacketSize0 = 0x0040
> idVendor = 0x0bda
> idProduct = 0x8178
> bcdDevice = 0x0200
> iManufacturer = 0x0001 <802.11n>
> iProduct = 0x0002 <USB WLAN>
> iSerialNumber = 0x0003 <00e04c000001>
> bNumConfigurations = 0x0001
>
> # netstat -I urtwn0
> Name Mtu Network Address Ipkts Ierrs Idrop Opkts Oerrs Coll
> urtwn 2290 <Link#3> 10:fe:ed:27:f6:5d 0 0 0 1055 0 0
>
> Could you commit this little tweak to -HEAD?
Committed as r268487, thanks.
> Regards,
> --
> Carlos Jacobo Puga Medina <cpm@fbsd.es>
Kevin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140710100317.GA16286>