Date: Sun, 28 Sep 2014 11:52:14 -0400 From: "Mike." <the.lists@mgm51.com> To: freebsd-current@freebsd.org Message-ID: <201409281152140359.008FD377@smtp.24cl.home>
next in thread | raw e-mail | index | archive | help
I'm starting to look at FreeBSD 11-current to see what's coming soon. I have an older notebook that I use for test environments for purposes such as this. Unfortunately, the notebook won't boot up from the install CD, there's a loop it cannot seem to get out of. Details are: - The install CD was made from this image: FreeBSD-11.0-CURRENT-i386-20140918-r271779-disc1 - The dmesg for the notebook is at the end of this message. The dmesg was captured with FreeBSD 10.0. In the dmesg, you can see the following lines: (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retry was blocked run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retry was blocked which, while slowing down the boot process drastically, still allowed the boot process to run to successful completion. - When I try to boot using the FreeBSD 11-current install CD, that loop seems to go on ad infinitum, or at least for the 5 minutes until I gave up. I cannot post a dmesg from that boot-up because I never got to a prompt. However, I did take a couple of pictures of the offending screens. They are here: http://archive.mgm51.com/cache/fbsd-11-current-01.jpg http://archive.mgm51.com/cache/fbsd-11-current-02.jpg The first image shows the start of the looping, and the second shows the continuation. While this notebook is used only for testing, it is important to me in that aspect. How can I get around this looping issue? Please let me know if there's any additional info you need. Thanks. And now, the dmesg... Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.0-RELEASE-p8 #1 r271323: Wed Sep 10 20:25:45 EDT 2014 root@a31pf.245l.home:/usr/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1698.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Family = 0xf Model = 0x2 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 1073741824 (1024 MB) avail memory = 1029230592 (981 MB) kbd1 at kbdmux0 random: <Software, Yarrow> initialized acpi0: <IBM TP-1G> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3ff00000 (3) failed cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe8000000-0xefffffff,0xd0100000-0xd010ffff irq 11 at device 0.0 on pci1 vgapci0: Boot video device uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usbus2 on uhci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 0.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci2: <serial bus, FireWire> at device 0.2 (no driver attached) fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow fxp0: Ethernet address: 00:0e:9b:2c:d3:f6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH3 (82801CA)> port 0x1c00-0x1cff,0x18c0-0x18ff irq 11 at device 31.5 on pci0 pcm0: <Analog Devices AD1881A AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe000 0-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounters tick every 1.000 msec random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen2.1: <Intel> at usbus2 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Intel> at usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered ath0: <Atheros 5212> irq 11 at device 0.0 on cardbus1 ath0: AR5212 mac 5.6 RF5112 phy 4.1 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0036 (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retry was blocked run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retry was blocked ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <HTS721080G9AT00 MC4OA51A> ATA-6 device ada0: Serial Number MPC412Y4G6J1AE ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from ufs:/dev/ada0p2 [rw]... wlan0: Ethernet address: 00:04:e2:b6:d4:d6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201409281152140359.008FD377>