Date: Wed, 01 Oct 2014 01:05:28 +0900 (JST) From: YAMAMOTO Shigeru <shigeru@os-hackers.jp> To: erichsfreebsdlist@alogt.com Cc: gjb@FreeBSD.org, freebsd-arm@FreeBSD.org, freebsd-stable@FreeBSD.org Subject: Re: FreeBSD 10.1-BETA3 Now Available Message-ID: <20141001.010528.1222668648660002950.shigeru@os-hackers.jp> In-Reply-To: <20140929.142712.117419748410715004.shigeru@os-hackers.jp> References: <20140929023616.GG75063@hub.FreeBSD.org> <20140929123327.6ab0207c@X220.alogt.com> <20140929.142712.117419748410715004.shigeru@os-hackers.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, >>>>> "shigeru" == YAMAMOTO Shigeru <shigeru@os-hackers.jp> writes: >>>>> "Erich" == Erich Dollansky <erichsfreebsdlist@alogt.com> writes: >> On Sun, 28 Sep 2014 22:36:16 -0400 Glen Barber <gjb@FreeBSD.org> wrote: >> Why not try the images already available here? >> http://ftp.freebsd.org/pub/FreeBSD/releases/ISO-IMAGES/10.1/ >> I have tried it now several times. All with the same result. I get SD image, FreeBSD-10.1-BETA3-arm-armv6-RPI-B.img.bz2, from that URL. When using original SD image, I can't boot because a kernel does not find root file system. I get a new firmware from https://github.com/raspberrypi/firmware/ and I replace *.dat, *.elf in SD image. # git clone https://github.com/raspberrypi/firmware.git # mount_msdosfs /dev/da0s1 /mnt # cp ./firmware/boot/*.dat /mnt/. # cp ./firmware/boot/*.elf /mnt/. # umount /mnt After replacing firmware image in SD image, I can boot RaspberryPi B+. ------------------------------------------------------------------------ root@raspberry-pi:~ # dmesg KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-BETA3 #0 r272167: Fri Sep 26 16:53:33 UTC 2014 root@releng1.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/RPI-B arm FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT: init without driver. CPU: ARM1176JZ-S rev 7 (ARM11J core) Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext WB enabled LABT branch prediction enabled 16KB/32B 4-way instruction cache 16KB/32B 4-way write-back-locking-C data cache real memory = 536866816 (511 MB) avail memory = 482893824 (460 MB) random: <Software, Yarrow> initialized kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0 intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0 systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0 Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000 Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000 bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0 gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0 gpio0: read-only pins: 46,47,48,49,50,51,52,53. gpio0: reserved pins: 48,49,50,51,52,53. gpioc0: <GPIO controller> on gpio0 gpiobus0: <OFW GPIO bus> on gpio0 gpioled0: <GPIO led> at pin(s) 16 on gpiobus0 iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0 spibus0: <OFW SPI bus> on spi0 bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0 mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0 sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0 mmc0: <MMC/SD bus> on sdhci_bcm0 uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0 uart0: console (115200,n,8,1) dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0 usbus0 on dwcotg0 fb0: <BCM2835 VT framebuffer driver> on ofwbus0 simplebus1: <Flattened device tree simple bus> on ofwbus0 simplebus1: could not get ranges device_attach: simplebus1 attach returned 6 Timecounters tick every 10.000 msec usbus0: 480Mbps High Speed USB v2.0 ugen0.1: <DWCOTG> at usbus0 uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 1 port with 1 removable, self powered mmcsd0: 2GB <SD 00000 1.0 SN CBDADEB8 MFG 05/2014 by 27 SM> at mmc0 25.0MHz/1bit/65535-block fb0: 656x416(0x0@0,0) 16bpp fb0: pitch 1312, base 0x5e006000, screen_size 545792 fbd0 on fb0 VT: initialize with new VT driver "fb". ugen0.2: <vendor 0x0424> at usbus0 uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0 uhub1: MTT enabled random: unblocking device. Root mount waiting for: usbus0 uhub1: 5 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x0424> at usbus0 smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... smsc0: chip 0xec00, rev. 0002 miibus0: <MII bus> on smsc0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 warning: no time-of-day clock registered, system time will not be set accurately ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: <USB Ethernet> on smsc0 ue0: Ethernet address: b8:27:eb:50:ce:e0 GEOM_PART: mmcsd0s2 was automatically resized. Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them. smsc0: chip 0xec00, rev. 0002 ------------------------------------------------------------------------ Thanks, --- YAMAMOTO Shigeru <shigeru@os-hackers.jp>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141001.010528.1222668648660002950.shigeru>